Forum Domoticz en français

Bonsoir,

Alors j'ai encore tout refait, je préfère, au moins j'ai moins de doute.
Là pour le coup, j'ai vraiment fait comme c'est expliqué à savoir j'ai fait les premières étapes et connecté la pi-zigate après alors qu'elle était plugé dès le départ auparavent mais je ne pense pas que ça change grand chose.
La seule remarque, c'est la commande "sudo usermod -ag gpio ft" qui a renvoyé : "usermod: user 'ft' does not exist".
Normal ou pas ?

Et puis arrivé dans Domoticz, j'ai installé le plugin et j'ai fait l'initialisation, la led bleu a scintillé ne fois et voilà le log :
J'ai lancé 2x l'initialisation mais ça fait 2x l'erreur que tu vois à la fin !
Docteur, je suis à sec là

Statut
Erreur
Filtre:
X
2020-12-15 22:13:44.322 Sunrise: 08:38:00 SunSet: 16:54:00
2020-12-15 22:13:44.322 Day length: 08:17:00 Sun at south: 12:46:00
2020-12-15 22:13:44.322 Civil twilight start: 08:01:00 Civil twilight end: 17:31:00
2020-12-15 22:13:44.322 Nautical twilight start: 07:20:00 Nautical twilight end: 18:12:00
2020-12-15 22:13:44.322 Astronomical twilight start: 06:42:00 Astronomical twilight end: 18:50:00
2020-12-15 22:13:44.046 Status: Domoticz V2020.2 (build 12741) (c)2012-2020 GizMoCuz
2020-12-15 22:13:44.048 Status: Build Hash: fee1840ed-modified, Date: 2020-12-14 10:35:17
2020-12-15 22:13:44.048 Status: Startup Path: /home/pi/domoticz/
2020-12-15 22:13:45.297 Active notification Subsystems: email (1/13)
2020-12-15 22:13:45.374 Starting shared server on: :::6144
2020-12-15 22:13:45.288 Status: PluginSystem: Started, Python version '3.7.3'.
2020-12-15 22:13:45.340 Status: WebServer(HTTP) started on address: :: with port 8080
2020-12-15 22:13:45.371 Status: WebServer(SSL) started on address: :: with port 443
2020-12-15 22:13:45.374 Status: TCPServer: shared server started...
2020-12-15 22:13:45.375 Status: RxQueue: queue worker started...
2020-12-15 22:13:47.376 Status: EventSystem: reset all events...
2020-12-15 22:13:47.376 Status: NotificationSystem: thread started...
2020-12-15 22:13:47.382 Status: EventSystem: reset all device statuses...
2020-12-15 22:13:47.515 Status: Python EventSystem: Initalizing event module.
2020-12-15 22:13:47.516 Status: EventSystem: Started
2020-12-15 22:13:47.516 Status: EventSystem: Queue thread started...
2020-12-15 22:13:47.875 Status: PluginSystem: Entering work loop.
2020-12-15 22:18:21.865 Status: (pi-Zigate) Started.
2020-12-15 22:18:23.952 (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 22:18:23.945 Status: (pi-Zigate) Entering work loop.
2020-12-15 22:18:23.945 Status: (pi-Zigate) Initialized version 4.11, author 'zaraki673 pipiche38'
2020-12-15 22:18:23.952 Status: (pi-Zigate) Zigate plugin stable-4.11.011 started
2020-12-15 22:18:23.952 Status: (pi-Zigate) Debug: 0
2020-12-15 22:18:23.952 Status: (pi-Zigate) load PluginConf
2020-12-15 22:18:23.956 Status: (pi-Zigate) filename set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/PluginConf-02.json
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginHome set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 22:18:23.956 Status: (pi-Zigate) homedirectory set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginData set to /home/pi/domoticz/plugins/Domoticz-Zigate/Data/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginConfig set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginOTAFirmware set to /home/pi/domoticz/plugins/Domoticz-Zigate/OTAFirmware/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginReports set to /home/pi/domoticz/plugins/Domoticz-Zigate/Reports/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginWWW set to /home/pi/domoticz/plugins/Domoticz-Zigate/www/
2020-12-15 22:18:23.956 Status: (pi-Zigate) pluginLogs set to /home/pi/domoticz/plugins/Domoticz-Zigate/Logs/
2020-12-15 22:18:23.956 Status: (pi-Zigate) Switching Heartbeat to 5 s interval
2020-12-15 22:18:23.956 Status: (pi-Zigate) Python Version - 3.7.3 (default, Jul 25 2020, 13:03:44)
2020-12-15 22:18:23.956 [GCC 8.3.0]
2020-12-15 22:18:23.956 Status: (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 22:18:23.956 Status: (pi-Zigate) DomoticzHash: fee1840ed-modified
2020-12-15 22:18:23.956 Status: (pi-Zigate) DomoticzBuildTime: 2020-12-14 10:35:17
2020-12-15 22:18:23.957 Status: (pi-Zigate) Opening DomoticzDB in raw
2020-12-15 22:18:23.969 Status: (pi-Zigate) Plugin Database: DeviceList-2.txt
2020-12-15 22:18:23.978 Status: (pi-Zigate) DeviceConf loaded
2020-12-15 22:18:24.210 Status: (pi-Zigate) load ListOfDevice
2020-12-15 22:18:24.211 Status: (pi-Zigate) Transport mode: USB
2020-12-15 22:18:24.211 Status: (pi-Zigate) ==> Transport Mode: auto
2020-12-15 22:18:24.215 Status: (pi-Zigate) Connection Name: Zigate, Transport: Serial, Address: /dev/serial1
2020-12-15 22:18:24.215 Status: (pi-Zigate) Connection open: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial1', Port: '', Baud: 115200, Connected: False, Parent: 'None'
2020-12-15 22:19:38.980 Status: (pi-Zigate) Stop directive received.
2020-12-15 22:19:38.980 Status: (pi-Zigate) Exiting work loop.
2020-12-15 22:19:39.622 (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 22:19:39.737 (pi-Zigate) runmode_with_gpiocommand
2020-12-15 22:19:39.737 (pi-Zigate) + Checkint GPIO PINs
2020-12-15 22:19:39.839 (pi-Zigate) + Checkint GPIO PINs
2020-12-15 22:19:39.021 Status: (pi-Zigate) onStop called
2020-12-15 22:19:39.021 Status: (pi-Zigate) Connection close: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial1', Port: '', Baud: 115200, Connected: False, Parent: 'None'
2020-12-15 22:19:39.180 Status: (pi-Zigate) Stopping threads.
2020-12-15 22:19:39.180 Status: (pi-Zigate) Stopped.
2020-12-15 22:19:39.180 Status: (pi-Zigate) Started.
2020-12-15 22:19:39.619 Status: (pi-Zigate) Entering work loop.
2020-12-15 22:19:39.620 Status: (pi-Zigate) Initialized version 4.11, author 'zaraki673 pipiche38'
2020-12-15 22:19:39.622 Status: (pi-Zigate) Zigate plugin stable-4.11.011 started
2020-12-15 22:19:39.622 Status: (pi-Zigate) Debug: 0
2020-12-15 22:19:39.622 Status: (pi-Zigate) load PluginConf
2020-12-15 22:19:39.624 Status: (pi-Zigate) filename set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/PluginConf-02.json
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginHome set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 22:19:39.624 Status: (pi-Zigate) homedirectory set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginData set to /home/pi/domoticz/plugins/Domoticz-Zigate/Data/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginConfig set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginOTAFirmware set to /home/pi/domoticz/plugins/Domoticz-Zigate/OTAFirmware/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginReports set to /home/pi/domoticz/plugins/Domoticz-Zigate/Reports/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginWWW set to /home/pi/domoticz/plugins/Domoticz-Zigate/www/
2020-12-15 22:19:39.624 Status: (pi-Zigate) pluginLogs set to /home/pi/domoticz/plugins/Domoticz-Zigate/Logs/
2020-12-15 22:19:39.625 Status: (pi-Zigate) Switching Heartbeat to 5 s interval
2020-12-15 22:19:39.625 Status: (pi-Zigate) Python Version - 3.7.3 (default, Jul 25 2020, 13:03:44)
2020-12-15 22:19:39.625 [GCC 8.3.0]
2020-12-15 22:19:39.625 Status: (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 22:19:39.625 Status: (pi-Zigate) DomoticzHash: fee1840ed-modified
2020-12-15 22:19:39.625 Status: (pi-Zigate) DomoticzBuildTime: 2020-12-14 10:35:17
2020-12-15 22:19:39.625 Status: (pi-Zigate) Opening DomoticzDB in raw
2020-12-15 22:19:39.634 Status: (pi-Zigate) Plugin Database: DeviceList-2.txt
2020-12-15 22:19:39.642 Status: (pi-Zigate) DeviceConf loaded
2020-12-15 22:19:39.699 Status: (pi-Zigate) load ListOfDevice
2020-12-15 22:19:39.712 Status: (pi-Zigate) Entries loaded from /home/pi/domoticz/plugins/Domoticz-Zigate/Data/DeviceList-2.txt
2020-12-15 22:19:39.712 Status: (pi-Zigate) Transport mode: PI
2020-12-15 22:19:39.735 Status: (pi-Zigate) Python version: ['3.7.3 (default, Jul 25 2020, 13:03:44) ', '[GCC 8.3.0]'] dist: ('debian', '10.7', '') linux_distribution: ('debian', '10.7', '') system: Linux machine: armv7l platform: Linux-5.4.79-v7+-armv7l-with-debian-10.7 uname: uname_result(system='Linux', node='raspberrypi', release='5.4.79-v7+', version='#1373 SMP Mon Nov 23 13:22:33 GMT 2020', machine='armv7l', processor='') version: #1373 SMP Mon Nov 23 13:22:33 GMT 2020 mac_ver: ('', ('', '', ''), '')
2020-12-15 22:19:39.869 Status: (pi-Zigate) ==> Transport Mode: auto
2020-12-15 22:19:39.874 Status: (pi-Zigate) Connection Name: Zigate, Transport: Serial, Address: /dev/serial1
2020-12-15 22:19:39.874 Status: (pi-Zigate) Connection open: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial1', Port: '', Baud: 115200, Connected: False, Parent: 'None'
2020-12-15 22:19:39.021 Error: CConnection_disconnect, disconnection request from 'pi-Zigate' ignored. Transport does not exist.

Turbogen a écrit : 15 déc. 2020, 22:36 La seule remarque, c'est la commande "sudo usermod -ag gpio ft" qui a renvoyé : "usermod: user 'ft' does not exist".
Normal ou pas ?

Non, 'ft' c'est le nom d'utilisateur, si t'es sous raspbian, faut remplacer par pi.
Pas la peine d'avancer dans les étapes si t'as une erreur, recommence de l'étape 7.

@pipiche pour la plupart des utilisateurs, c'est pi qui est utilisé.

Merci, effectivement, ça parait telement logique quand on te le dit, par contre, il n'a pas l'air de comprendre l'option -ag

usermod: -a flag is only allowed with the -G flag
Usage: usermod [options] LOGIN

Options:
-c, --comment COMMENT new value of the GECOS field
-d, --home HOME_DIR new home directory for the user account
-e, --expiredate EXPIRE_DATE set account expiration date to EXPIRE_DATE
-f, --inactive INACTIVE set password inactive after expiration
to INACTIVE
-g, --gid GROUP force use GROUP as new primary group
-G, --groups GROUPS new list of supplementary GROUPS
-a, --append append the user to the supplemental GROUPS
mentioned by the -G option without removing
him/her from other groups
-h, --help display this help message and exit
-l, --login NEW_LOGIN new value of the login name
-L, --lock lock the user account
-m, --move-home move contents of the home directory to the
new location (use only with -d)
-o, --non-unique allow using duplicate (non-unique) UID
-p, --password PASSWORD use encrypted password for the new password
-R, --root CHROOT_DIR directory to chroot into
-s, --shell SHELL new login shell for the user account
-u, --uid UID new UID for the user account
-U, --unlock unlock the user account
-v, --add-subuids FIRST-LAST add range of subordinate uids
-V, --del-subuids FIRST-LAST remove range of subordinate uids
-w, --add-subgids FIRST-LAST add range of subordinate gids
-W, --del-subgids FIRST-LAST remove range of subordinate gids
-Z, --selinux-user SEUSER new SELinux user mapping for the user account

A priori -aG

sudo usermod -aG gpio pi

Pour l'instant, ça ne change rien !

Ca tourne autour de cette erreur :
2020-12-15 23:19:10.359 Error: CConnection_disconnect, disconnection request from 'pi-Zigate' ignored. Transport does not exist.

2020-12-15 23:19:10.951 (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 23:19:10.325 Status: (pi-Zigate) Stop directive received.
2020-12-15 23:19:10.325 Status: (pi-Zigate) Exiting work loop.
2020-12-15 23:19:10.358 Status: (pi-Zigate) onStop called
2020-12-15 23:19:10.358 Status: (pi-Zigate) Connection close: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial1', Port: '', Baud: 115200, Connected: False, Parent: 'None'
2020-12-15 23:19:10.525 Status: (pi-Zigate) Stopping threads.
2020-12-15 23:19:10.525 Status: (pi-Zigate) Stopped.
2020-12-15 23:19:10.525 Status: (pi-Zigate) Started.
2020-12-15 23:19:10.947 Status: (pi-Zigate) Entering work loop.
2020-12-15 23:19:10.948 Status: (pi-Zigate) Initialized version 4.11, author 'zaraki673 pipiche38'
2020-12-15 23:19:10.950 Status: (pi-Zigate) Zigate plugin stable-4.11.011 started
2020-12-15 23:19:10.950 Status: (pi-Zigate) Debug: 0
2020-12-15 23:19:10.951 Status: (pi-Zigate) load PluginConf
2020-12-15 23:19:10.953 Status: (pi-Zigate) filename set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/PluginConf-02.json
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginHome set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 23:19:10.953 Status: (pi-Zigate) homedirectory set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginData set to /home/pi/domoticz/plugins/Domoticz-Zigate/Data/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginConfig set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginOTAFirmware set to /home/pi/domoticz/plugins/Domoticz-Zigate/OTAFirmware/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginReports set to /home/pi/domoticz/plugins/Domoticz-Zigate/Reports/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginWWW set to /home/pi/domoticz/plugins/Domoticz-Zigate/www/
2020-12-15 23:19:10.953 Status: (pi-Zigate) pluginLogs set to /home/pi/domoticz/plugins/Domoticz-Zigate/Logs/
2020-12-15 23:19:10.953 Status: (pi-Zigate) Switching Heartbeat to 5 s interval
2020-12-15 23:19:10.953 Status: (pi-Zigate) Python Version - 3.7.3 (default, Jul 25 2020, 13:03:44)
2020-12-15 23:19:10.953 [GCC 8.3.0]
2020-12-15 23:19:10.954 Status: (pi-Zigate) DomoticzVersion: 2020.2 (build 12741)
2020-12-15 23:19:10.954 Status: (pi-Zigate) DomoticzHash: fee1840ed-modified
2020-12-15 23:19:10.954 Status: (pi-Zigate) DomoticzBuildTime: 2020-12-14 10:35:17
2020-12-15 23:19:10.954 Status: (pi-Zigate) Opening DomoticzDB in raw
2020-12-15 23:19:10.965 Status: (pi-Zigate) Plugin Database: DeviceList-2.txt
2020-12-15 23:19:10.975 Status: (pi-Zigate) DeviceConf loaded
2020-12-15 23:19:10.359 Error: CConnection_disconnect, disconnection request from 'pi-Zigate' ignored. Transport does not exist.
2020-12-15 23:19:11.091 (pi-Zigate) runmode_with_gpiocommand
2020-12-15 23:19:11.091 (pi-Zigate) + Checkint GPIO PINs
2020-12-15 23:19:11.207 (pi-Zigate) + Checkint GPIO PINs
2020-12-15 23:19:11.049 Status: (pi-Zigate) load ListOfDevice
2020-12-15 23:19:11.062 Status: (pi-Zigate) Entries loaded from /home/pi/domoticz/plugins/Domoticz-Zigate/Data/DeviceList-2.txt
2020-12-15 23:19:11.063 Status: (pi-Zigate) Transport mode: PI
2020-12-15 23:19:11.088 Status: (pi-Zigate) Python version: ['3.7.3 (default, Jul 25 2020, 13:03:44) ', '[GCC 8.3.0]'] dist: ('debian', '10.7', '') linux_distribution: ('debian', '10.7', '') system: Linux machine: armv7l platform: Linux-5.4.79-v7+-armv7l-with-debian-10.7 uname: uname_result(system='Linux', node='raspberrypi', release='5.4.79-v7+', version='#1373 SMP Mon Nov 23 13:22:33 GMT 2020', machine='armv7l', processor='') version: #1373 SMP Mon Nov 23 13:22:33 GMT 2020 mac_ver: ('', ('', '', ''), '')
2020-12-15 23:19:11.238 Status: (pi-Zigate) ==> Transport Mode: auto
2020-12-15 23:19:11.242 Status: (pi-Zigate) Connection Name: Zigate, Transport: Serial, Address: /dev/serial1
2020-12-15 23:19:11.242 Status: (pi-Zigate) Connection open: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial1', Port: '', Baud: 115200, Connected: False, Parent: 'None'

Est-ce que la PiZiGate fonctionne avec l'outils de tests ?

Bonsoir,

Je suis en train de regarder ça justement mais y a pas grand chose qui fonctionne !

Par contre, je dois mettre quel port tt.. ou serial.. ou ...

Merci,

Bonsoir,

Est ce un problème si c'est serial1 qui pointe sur ttyAMA0 ? Et que je ne vois pas apparaître serial0.

Alors que j'ai bien désactivé le bt, ligne rajoutée dans config.txt, suppression du morceau dans cmdline.txt.
Et lancé
sudo systemctl disable hciuart
sudo usermod -aG gpio pi
sudo shutdown

D'ailleurs Pipiche, j'ai vu que tu as modifié la procédure mais si je ne me trompe, c'est un G qu'il faut non !

Mais en tout cas pour moi après ça, pas d'apparition de serial0 !

Est ce un soucis ?

Merci,

Turbogen a écrit : 16 déc. 2020, 22:55 Bonsoir,

Est ce un problème si c'est serial1 qui pointe sur ttyAMA0 ? Et que je ne vois pas apparaître serial0.

Alors que j'ai bien désactivé le bt, ligne rajoutée dans config.txt, suppression du morceau dans cmdline.txt.
Et lancé
sudo systemctl disable hciuart
sudo usermod -aG gpio pi
sudo shutdown

D'ailleurs Pipiche, j'ai vu que tu as modifié la procédure mais si je ne me trompe, c'est un G qu'il faut non !

Mais en tout cas pour moi après ça, pas d'apparition de serial0 !

Est ce un soucis ?

Merci,

je te recommande voir directement avec le forunisseur de la ZiGate, ce sera certainement plus rapide

Bonsoir,

J'ai une deuxième raspi jamais utilisée, je vais quand même essayer avec, on ne sait jamais.

Une chose quand même, y en a qui y sont arrivés avec une pi3 rassurez moi.

Et avec la pi4, c'est plus facile ? Dans ce cas, je ne vais pas m'embêter des années même si je continuerai à chercher, ça me rappelle un passé trop loin hélas mais c'est sympa.

J'ai peur qu'il y ai des variations dans le temps sur les versions car c'est bizarre quand même que le résultat d'une série de commande plutôt simple n'aboutisse pas.

A+