Page 2 sur 2

Re: plantage DZ

Publié : 28 août 2021, 18:56
par Chrominator
/etc/init.d/domoticz.sh est bien celui qui est censé démarrer domoticz.

Re: plantage DZ

Publié : 28 août 2021, 20:37
par vulbas
ok, j'ai reussi à modifier le fichier, j'ai du changer les droits sinon je n'y avais pas acces. maintenant je vois bien le fichier domoticz.txt
plus qu'à attendre que ça plante :D
merci pour ton aide c'est top

edit,
bon voilà. plus acces à DZ

Code : Tout sélectionner

pi@raspberrypi:~ $ less /tmp/domoticz.txt
2021-08-29 00:25:10.162  Status: Domoticz V2021.1 (build 13482) (c)2012-2021 GizMoCuz
2021-08-29 00:25:10.162  Status: Build Hash: e8eb6e363, Date: 2021-08-24 17:14:18
2021-08-29 00:25:10.163  Status: Startup Path: /home/pi/domoticz/
2021-08-29 00:25:11.285  Sunrise: 07:04:00 SunSet: 20:40:00
2021-08-29 00:25:11.285  Day length: 13:35:00 Sun at south: 13:52:00
2021-08-29 00:25:11.285  Civil twilight start: 06:31:00 Civil twilight end: 21:12:00
2021-08-29 00:25:11.285  Nautical twilight start: 05:51:00 Nautical twilight end: 21:53:00
2021-08-29 00:25:11.285  Astronomical twilight start: 05:07:00 Astronomical twilight end: 22:37:00
2021-08-29 00:25:12.127  Status: PluginSystem: Started, Python version '3.7.3'.
2021-08-29 00:25:12.168  Active notification Subsystems: email, pushbullet (2/13)
2021-08-29 00:25:12.209  Status: WebServer(HTTP) started on address: :: with port 8080
2021-08-29 00:25:12.337  Status: WebServer(SSL) started on address: :: with port 443
2021-08-29 00:25:12.351  Status: Proxymanager started.
2021-08-29 00:25:12.384  Status: Camera: settings (re)loaded
2021-08-29 00:25:12.395  Starting shared server on: :::6554
2021-08-29 00:25:12.395  Status: TCPServer: shared server started...
2021-08-29 00:25:12.401  Status: RxQueue: queue worker started...
2021-08-29 00:25:12.484  Proxy: Error, reconnecting (Connection refused)
2021-08-29 00:25:14.403  Status: EDF: Teleinfo device uses serial port: /dev/ttyUSB-EDF at 1200 bauds
2021-08-29 00:25:14.412  Status: EDF: CRC checks will be performed on incoming data
2021-08-29 00:25:14.415  Status: switch TV presence: Worker started...
2021-08-29 00:25:14.415  Status: controle batterie zwave: (controle batterie zwave) Entering work loop.
2021-08-29 00:25:14.416  controle batterie zwave hardware started.
2021-08-29 00:25:14.416  Status: controle batterie zwave: (controle batterie zwave) Started.
2021-08-29 00:25:14.417  Status: Harmony: Worker thread started...
2021-08-29 00:25:14.451  Status: hardware pi: System: Raspberry Pi
2021-08-29 00:25:14.498  Status: hardware pi: Hardware Monitor: Started (OStype Raspberry Pi Linux)
2021-08-29 00:25:14.498  Status: hue bridge: Worker started...
2021-08-29 00:25:14.498  Status:  clim: ( clim) Entering work loop.
2021-08-29 00:25:14.498   clim hardware started.
2021-08-29 00:25:14.498  Status:  clim: ( clim) Started.
2021-08-29 00:25:14.499  Status: NotificationSystem: thread started...
2021-08-29 00:25:14.500  Status: EventSystem: reset all events...
2021-08-29 00:25:14.521  Status: EventSystem: reset all device statuses...
2021-08-29 00:25:14.583  Status: EDF: CRC check mode set to 1
2021-08-29 00:25:14.605  Status: rflink-433: Using serial port: /dev/ttyUSB-RFX433
2021-08-29 00:25:14.859  Status: controle batterie zwave: (controle batterie zwave) Initialized version 0.5.2, author 'logread'
2021-08-29 00:25:14.907  Status: Z-wave: using config in: /home/pi/domoticz/Config/
2021-08-29 00:25:14.956  Status: PluginSystem: 2 plugins started.
2021-08-29 00:25:15.405  Status:  clim: ( clim) Initialized version 3.0.0, author 'tixi'
2021-08-29 00:25:15.581  controle batterie zwave: (controle batterie zwave) Debug logging mask set to: NONE
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to full if greater or equal than 75 percent
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to normal if greater or equal than 50 percent
2021-08-29 00:25:15.582  controle batterie zwave: (controle batterie zwave) Setting battery level to empty if less or equal than 25 percent
2021-08-29 00:25:15.584  controle batterie zwave: (controle batterie zwave) Using polling interval of 60 minutes
2021-08-29 00:25:15.593   clim: ( clim) Debug logging mask set to: NONE
2021-08-29 00:25:15.709  Status: Z-wave: Starting...
2021-08-29 00:25:15.709  Status: Z-wave: Version: 1.6-1911-gc6a420ef
2021-08-29 00:25:16.466  hue bridge: Color Switch (Hue color lamp 1)
2021-08-29 00:25:16.546  hue bridge: Color Switch (Hue color go droit)
2021-08-29 00:25:16.609  hue bridge: Color Switch (Hue go gauche)
2021-08-29 00:25:16.638  hardware pi: Temp (Internal Temperature)
2021-08-29 00:25:16.673  hue bridge: Color Switch (Hue color spot centre)
2021-08-29 00:25:16.700  hue bridge: Color Switch (Hue color spot droit)
2021-08-29 00:25:16.721  hue bridge: Color Switch (Hue color spot gauche)
2021-08-29 00:25:16.740  hue bridge: Color Switch (Hue color lamp 2)
2021-08-29 00:25:16.741  Status: Python EventSystem: Initializing event module.
2021-08-29 00:25:16.743  Status: EventSystem: Started
2021-08-29 00:25:16.744  Status: EventSystem: Queue thread started...
2021-08-29 00:25:16.782  EDF: General/kWh (Teleinfo kWh Heures Creuses)
si tu vois un truc la dedans qui pourrait poser probleme... tout me semble ok

j'ai tenté un

Code : Tout sélectionner

pi@raspberrypi:~ $ sudo service domoticz.sh status
● domoticz.service - LSB: Home Automation System
   Loaded: loaded (/etc/init.d/domoticz.sh; generated)
   Active: active (exited) since Sun 2021-08-29 00:25:10 CEST; 8min ago
     Docs: man:systemd-sysv-generator(8)
  Process: 608 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SUCCESS)

Aug 29 00:24:30 raspberrypi systemd[1]: Starting LSB: Home Automation System...
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.162  Status: Domoticz V2021.1 (build 13482) (c)2012-2021 GizMoCuz
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.162  Status: Build Hash: e8eb6e363, Date: 2021-08-24 17:14:18
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: 2021-08-29 00:25:10.163  Status: Startup Path: /home/pi/domoticz/
Aug 29 00:25:10 raspberrypi domoticz.sh[608]: domoticz: Domoticz is starting up....
Aug 29 00:25:10 raspberrypi domoticz[620]: Domoticz is starting up....
Aug 29 00:25:10 raspberrypi domoticz[624]: Domoticz running...
Aug 29 00:25:10 raspberrypi systemd[1]: Started LSB: Home Automation System.
pi@raspberrypi:~ $
mais je ne peux commander aucun appareil via des boutons ou la google home par exempple. DZ est bien HS

Re: plantage DZ

Publié : 31 août 2021, 14:18
par vulbas
je viens donner des news....... j'avais oublié que j'avais installé le plugin tuya..... je l'ai viré et depuis zero probleme... :D