Page 2 sur 4
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 23 oct. 2023, 14:10
par pipiche
lacha007 a écrit : 23 oct. 2023, 13:42
le soucis c est si je ne supprime pas le plugin je n arrive pas à installer / initialiser la clé.
c'est quoi le problème?
(1) arreter le plugin
(2) debrancher la zigate
(3) brancher la zonoff -> et identifer le chemin d'accès ( serial port)
relancer domoticz
a ce stade le plugin n'est pas lancé
(4) aller dans Domoticz > Hardware
(6) selectioner le plugin
(a) changer le port
(b) changer le modèle du coordinateur
(7) activer Initialisation
faire mettre à jour ( ne pas faire add sinon ca ajoute une nouvelle instance du plugin)
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 23 oct. 2023, 14:32
par lacha007
Et je tombe sur ce message quand je fais cela.
A detail pres que la clé zigate n'etait pas la quand j'ai restaurer la db / repertoire d'installation
Code : Tout sélectionner
2023-10-22 20:28:49.230 Status: Zigbee: load ListOfDevice
2023-10-22 20:28:49.523 Status: Zigbee: 40 Entries loaded from /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Data/DeviceList-2.txt
2023-10-22 20:28:49.636 Status: Zigbee: Transport mode: ZigpyEZSP
2023-10-22 20:28:50.962 Status: Zigbee: Start Zigpy Transport on EZSP
2023-10-22 20:28:50.968 Status: Zigbee: ZigpyTransport: thread_processing_and_sending Thread start.
2023-10-22 20:28:50.969 Status: Zigbee: Start Web Server connection
2023-10-22 20:28:51.074 Status: Zigbee: Web backend for Web User Interface started on port: 9440
2023-10-22 20:28:51.326 Status: Zigbee: Plugin looks to upgrade the Certified Device package
2023-10-22 20:28:51.685 Status: Zigbee: Started radio ezsp port: null
2023-10-22 20:28:51.702 Error: Zigbee: Error at startup 'NoneType' object has no attribute 'networkState'
2023-10-22 20:28:51.712 Status: Zigbee: Network settings
2023-10-22 20:28:51.713 Status: Zigbee: Device IEEE: ff:ff:ff:ff:ff:ff:ff:ff
2023-10-22 20:28:51.714 Status: Zigbee: Device NWK: 0xFFFE
2023-10-22 20:28:51.714 Status: Zigbee: Network Update Id: 0x0000
2023-10-22 20:28:51.715 Status: Zigbee: PAN ID: 0xFFFE
2023-10-22 20:28:51.716 Status: Zigbee: Extended PAN ID: ff:ff:ff:ff:ff:ff:ff:ff
2023-10-22 20:28:51.717 Status: Zigbee: Channel: 0
2023-10-22 20:28:51.718 Error: Zigbee: Coordinator not correctly initialized
2023-10-22 20:28:51.724 Status: Zigbee: Detected Legrand IEEE, broadcast Write Attribute 0x0000/0xf000
2023-10-22 20:28:51.833 Error: Zigbee: ControllerException / ApplicationController is not running: request() Not able to execute the zigpy command: RAW-COMMAND data: {'Function' : zcl_raw_write_attributeNoResponse,'Profile' : 0104,'Cluster' : 0000,'TargetNwk' : ffff,'TargetEp' : 01,'SrcEp' : 01,'Sqn' : 00,'RxOnIdle' : True,'payload' : 142110000500f02300000000,'timestamp' : 1697999331.7056026,'AddressMode' : 02,}
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 23 oct. 2023, 14:39
par pipiche
probablement que le port d'accès n'est pas le bon, ou qu'un processs l'utilise ?
As-tu z2m installé, si oui il est impératif de le dé-installer
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 23 oct. 2023, 19:54
par lacha007
HEllo
z2m pour zigbee to Mqtt?
J ai une image docker domoticz ou je passe un script de customStart pour installer le plugin. J'ai un mosquito un homebridge et un nodered en container a coté mais cela ne devrait pas influencer. JE regarde si il fait partie de l image de base
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 23 oct. 2023, 20:23
par pipiche
Assur toi qu’il n’y ait pas un process qui s’accroche au port de la sonoff
Envoyé de mon iPhone en utilisant Tapatalk
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 04 nov. 2023, 10:28
par lacha007
Hello,
De retour dans la maison .
C'est bien un dongle E. Je l'ai donc mise en Silicon Labs EZSP (via zigpy).
Je me suis dit que j'allais repartir d'une install propre, c'est pas grave si je dois pairer de nouveau tout.
Quoi qu'il en soit toutes mes vannes thermostatique Moesh etaient sans piles , je devais toutes les reprendre.
Quand j ajoute le Materiel avec demande d'initialisation du plugin j'ai les log suivant :
Code : Tout sélectionner
2023-11-04 10:21:01.382 Status: [web:8080] Incoming connection from: 192.168.20.6
2023-11-04 10:21:31.083 Status: ZIGBEE: Entering work loop.
2023-11-04 10:21:31.084 ZIGBEE: Worker thread started.
2023-11-04 10:21:31.084 Status: ZIGBEE: Started.
2023-11-04 10:21:33.627 Status: ZIGBEE: Initialized version 7.1, author 'pipiche38'
2023-11-04 10:21:33.629 Status: ZIGBEE: Zigbee for Domoticz plugin starting
2023-11-04 10:21:33.629 Status: ZIGBEE: Z4D plugin requires python3 3.8 or above and you are running 3.9
2023-11-04 10:21:33.629 Status: ZIGBEE: Checking Python modules /opt/domoticz/userdata/plugins/Domoticz-Zigbee/requirements.txt
2023-11-04 10:21:34.470 ZIGBEE: load PluginConf
2023-11-04 10:21:34.474 Error: ZIGBEE: Cannot access path: /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf/PluginConf.txt
2023-11-04 10:21:34.475 Status: ZIGBEE: filename set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf/PluginConf.txt
2023-11-04 10:21:34.476 Status: ZIGBEE: pluginHome set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee
2023-11-04 10:21:34.476 Status: ZIGBEE: homedirectory set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee
2023-11-04 10:21:34.476 Status: ZIGBEE: pluginData set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Data
2023-11-04 10:21:34.476 Status: ZIGBEE: pluginConfig set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf
2023-11-04 10:21:34.477 Status: ZIGBEE: pluginOTAFirmware set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/OTAFirmware
2023-11-04 10:21:34.477 Status: ZIGBEE: pluginReports set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Reports
2023-11-04 10:21:34.477 Status: ZIGBEE: pluginWWW set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/www
2023-11-04 10:21:34.478 Status: ZIGBEE: pluginLogs set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Logs
2023-11-04 10:21:34.478 Status: ZIGBEE: expJsonDatabase set to 0
2023-11-04 10:21:34.479 ZIGBEE: Installing plugin custom page /opt/domoticz/www/templates/ZIGBEE.html
2023-11-04 10:21:34.481 ZIGBEE: Starting LoggingManagement thread
2023-11-04 10:21:34.481 ZIGBEE: zigpy_login_mode(30)
2023-11-04 10:21:34.483 ZIGBEE: start_logging_thread
2023-11-04 10:21:34.484 ZIGBEE: logging_thread - listening
2023-11-04 10:21:34.485 Status: ZIGBEE: Please watch plugin log into /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Logs/PluginZigbee_09.log
2023-11-04 10:21:34.487 Status: ZIGBEE: Log history not found, no error logged
2023-11-04 10:21:34.495 Status: ZIGBEE: Zigbee for Domoticz (z4d) plugin stable7-7.1.004 started
2023-11-04 10:21:34.501 Status: [web:8080] Incoming connection from: 127.0.0.1
2023-11-04 10:21:34.516 Status: ZIGBEE: Loading ZCL Cluster definitions
2023-11-04 10:21:34.520 Status: ZIGBEE: - ZCL Cluster 0000 - (V1) Basic loaded
2023-11-04 10:21:34.521 Status: ZIGBEE: - ZCL Cluster 0001 - (V1) Power loaded
2023-11-04 10:21:34.523 Status: ZIGBEE: - ZCL Cluster 0002 - (V1) Device Temperature Configuration loaded
2023-11-04 10:21:34.525 Status: ZIGBEE: - ZCL Cluster 0003 - (V1) Identify loaded
2023-11-04 10:21:34.527 Status: ZIGBEE: - ZCL Cluster 0004 - (V1) Groups loaded
2023-11-04 10:21:34.528 Status: ZIGBEE: - ZCL Cluster 0005 - (V1) Scenes loaded
2023-11-04 10:21:34.529 Status: ZIGBEE: - ZCL Cluster 0006 - (V1) On/Off loaded
2023-11-04 10:21:34.531 Status: ZIGBEE: - ZCL Cluster 0007 - (V1) On/Off Switch Configuration loaded
2023-11-04 10:21:34.533 Status: ZIGBEE: - ZCL Cluster 0008 - (V1) Level loaded
2023-11-04 10:21:34.534 Status: ZIGBEE: - ZCL Cluster 0009 - (V1) Alarms loaded
2023-11-04 10:21:34.536 Status: ZIGBEE: - ZCL Cluster 000a - (V1) Time loaded
2023-11-04 10:21:34.538 Status: ZIGBEE: - ZCL Cluster 000d - (V1) Analog Output loaded
2023-11-04 10:21:34.540 Status: ZIGBEE: - ZCL Cluster 000f - (V1) Binary Input loaded
2023-11-04 10:21:34.542 Status: ZIGBEE: - ZCL Cluster 0013 - (V1) Multistate Output loaded
2023-11-04 10:21:34.543 Status: ZIGBEE: - ZCL Cluster 0019 - (V1) OTA Upgrade loaded
2023-11-04 10:21:34.546 Status: ZIGBEE: - ZCL Cluster 0020 - (V1) Poll Control loaded
2023-11-04 10:21:34.549 Status: ZIGBEE: - ZCL Cluster 0102 - (V1) Window Covering loaded
2023-11-04 10:21:34.550 Status: ZIGBEE: - ZCL Cluster 0202 - (V1) Fan Control loaded
2023-11-04 10:21:34.552 Status: ZIGBEE: - ZCL Cluster 0204 - (V1) Thermostat User Interface Configuration loaded
2023-11-04 10:21:34.554 Status: ZIGBEE: - ZCL Cluster 0300 - (V1) Color Control loaded
2023-11-04 10:21:34.556 Status: ZIGBEE: - ZCL Cluster 0301 - (V1) Ballast Configuration loaded
2023-11-04 10:21:34.558 Status: ZIGBEE: - ZCL Cluster 0400 - (V1) Illuminance Level Sensing loaded
2023-11-04 10:21:34.560 Status: ZIGBEE: - ZCL Cluster 0402 - (V1) Temperature Measurement loaded
2023-11-04 10:21:34.561 Status: ZIGBEE: - ZCL Cluster 0403 - (V1) Pressure Measurement loaded
2023-11-04 10:21:34.563 Status: ZIGBEE: - ZCL Cluster 0405 - (V1) Relative Humidity Measurement loaded
2023-11-04 10:21:34.565 Status: ZIGBEE: - ZCL Cluster 0406 - (V1) Occupancy Sensing loaded
2023-11-04 10:21:34.569 Status: ZIGBEE: - ZCL Cluster 0700 - (V1) Price loaded
2023-11-04 10:21:34.572 Status: ZIGBEE: - ZCL Cluster 0702 - (V1) Metering (Smart Energy) loaded
2023-11-04 10:21:34.574 Status: ZIGBEE: - ZCL Cluster 0b01 - (V1) Meter Identification loaded
2023-11-04 10:21:34.576 Status: ZIGBEE: - ZCL Cluster 0b04 - (V1) Electrical Measurement loaded
2023-11-04 10:21:34.578 Status: ZIGBEE: - ZCL Cluster 0b05 - (V1) Diagnostics loaded
2023-11-04 10:21:34.580 Status: ZIGBEE: - ZCL Cluster e000 - (V1) Tuya E000 Private Cluster loaded
2023-11-04 10:21:34.582 Status: ZIGBEE: - ZCL Cluster e001 - (V1) Tuya E001 Private Cluster loaded
2023-11-04 10:21:34.584 Status: ZIGBEE: - ZCL Cluster e002 - (V1) Tuya E002 Private Cluster loaded
2023-11-04 10:21:34.586 Status: ZIGBEE: - ZCL Cluster fcc0 - (V1) LUMI Private Cluster loaded
2023-11-04 10:21:34.588 Status: ZIGBEE: - ZCL Cluster ff66 - (V1) Lixee Zlinky private cluster loaded
2023-11-04 10:21:34.592 Status: ZIGBEE: DeviceConf loaded - 16 confs loaded
2023-11-04 10:21:34.600 Status: ZIGBEE: Local-Device conf loaded - 21 confs loaded
2023-11-04 10:21:35.131 Status: ZIGBEE: Certified Devices loaded - 518 confs loaded
2023-11-04 10:21:35.132 Status: ZIGBEE: load ListOfDevice
2023-11-04 10:21:35.134 Status: ZIGBEE: Transport mode: ZigpyEZSP
2023-11-04 10:21:36.230 Status: ZIGBEE: Start Zigpy Transport on EZSP
2023-11-04 10:21:36.236 Status: ZIGBEE: ZigpyTransport: thread_processing_and_sending Thread start.
2023-11-04 10:21:36.236 Status: ZIGBEE: Start Web Server connection
2023-11-04 10:21:36.260 Status: ZIGBEE: Web backend for Web User Interface started on port: 9440
2023-11-04 10:21:36.478 Status: ZIGBEE: Plugin looks to upgrade the Certified Device package
2023-11-04 10:21:36.840 Status: ZIGBEE: Started radio ezsp port: /dev/ttyUSB-ZIGBEE
2023-11-04 10:21:36.842 Status: ZIGBEE: Coordinator initialisation requested Channel 0(0x00) ExtendedPanId: 0x0000000000000000
2023-11-04 10:21:38.179 Status: ZIGBEE: Bellows Radio register default Ep
2023-11-04 10:21:39.393 Status: ZIGBEE: Domoticz Widgets usage is at 1.2 % (252 units free)
2023-11-04 10:21:45.902 Status: ZIGBEE: Number of devices recently active in Coordinator = 0
2023-11-04 10:21:45.945 Status: ZIGBEE: EZSP Radio manufacturer:
2023-11-04 10:21:45.949 Status: ZIGBEE: EZSP Radio board name:
2023-11-04 10:21:45.952 Status: ZIGBEE: EmberZNet version: 6.10.3.0 build 297
2023-11-04 10:21:45.954 Status: ZIGBEE: Assuming new network formed
2023-11-04 10:21:45.957 Status: ZIGBEE: Network settings
2023-11-04 10:21:45.961 Status: ZIGBEE: Device IEEE: e0:79:8d:ff:fe:c7:b7:1b
2023-11-04 10:21:45.962 Status: ZIGBEE: Device NWK: 0x0000
2023-11-04 10:21:45.964 Status: ZIGBEE: Network Update Id: 0x0000
2023-11-04 10:21:45.965 Status: ZIGBEE: PAN ID: 0xCF51
2023-11-04 10:21:45.972 Status: ZIGBEE: Extended PAN ID: 60:61:e1:21:8b:c4:e7:9f
2023-11-04 10:21:45.972 Status: ZIGBEE: Channel: 25
2023-11-04 10:21:45.978 Status: ZIGBEE: Untested Zigbee adaptater model. If this is a Sonoff USB Dongle E that is known issue, otherwise please report to the Zigbee for Domoticz team
2023-11-04 10:21:45.979 Status: ZIGBEE: Installer Version Number: 6.10.3.0 build 297
2023-11-04 10:21:45.980 Status: ZIGBEE: Branch Version: ==> Unknown Silicon Labs <==
2023-11-04 10:21:45.984 Status: ZIGBEE: Initialize Zigate Data Structure 0000 e0798dfffec7b71b
2023-11-04 10:21:45.991 Status: ZIGBEE: Updating Channel in Plugin Configuration from: 0 to: 25
2023-11-04 10:21:45.997 Status: ZIGBEE: Zigbee Coordinator ieee: e0798dfffec7b71b , short addr: 0000
2023-11-04 10:21:46.000 Status: ZIGBEE: Network state UP, PANID: cf51 extPANID: 0x6061e1218bc4e79f Channel: 25
2023-11-04 10:21:53.074 Status: ZIGBEE: Request Disabling Accepting new Hardware
2023-11-04 10:21:58.086 ZIGBEE: URL INFOS {'type': 'command', 'param': 'updatehardware', 'htype': '94', 'idx': 9, 'name': 'ZIGBEE', 'address': '0.0.0.0', 'port': '9999', 'serialport': '/dev/ttyUSB-ZIGBEE', 'Mode1': 'ZigpyEZSP', 'Mode2': 'USB', 'Mode3': 'False', 'Mode4': '9440', 'Mode5': 'http://127.0.0.1:8080', 'Mode6': '-1', 'extra': 'Zigate', 'enabled': 'true', 'datatimeout': '0', 'loglevel': 7}
2023-11-04 10:21:58.089 Status: ZIGBEE: Plugin Restart command : http://127.0.0.1:8080/json.htm?type=command¶m=updatehardware&htype=94&idx=9&name=ZIGBEE&address=0.0.0.0&port=9999&serialport=%2Fdev%2FttyUSB-ZIGBEE&Mode1=ZigpyEZSP&Mode2=USB&Mode3=False&Mode4=9440&Mode5=http%3A%2F%2F127.0.0.1%3A8080&Mode6=-1&extra=Zigate&enabled=true&datatimeout=0&loglevel=7
2023-11-04 10:21:58.106 Status: ZIGBEE: coordinator set to Certification : 1/CE -> CE
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
2023-11-04 10:21:58.167 Status: ZIGBEE: Stop directive received.
2023-11-04 10:21:59.606 ZIGBEE: onStop()
2023-11-04 10:21:59.607 Status: ZIGBEE: ota_scan_folder Following Firmware have been loaded
2023-11-04 10:21:59.610 Status: ZIGBEE: Plugin with Zigpy, Coordinator Unknown Silicon Labs firmware UNK - 6.10.3.0 build 297 correctly initialized
2023-11-04 10:21:59.616 Status: ZIGBEE: Shuting down co-routine
2023-11-04 10:21:59.617 Status: ZIGBEE: ZigpyTransport: thread_processing_and_sending Thread stop.
2023-11-04 10:22:06.242 Status: ZIGBEE: Coordinator backup is available: /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Data/Coordinator-09.backup
2023-11-04 10:22:08.252 Status: ZIGBEE: Statistics on message
2023-11-04 10:22:08.252 Status: ZIGBEE: PDM load(s) : 0
2023-11-04 10:22:08.252 Status: ZIGBEE: ZiGate reacting time
2023-11-04 10:22:08.252 Status: ZIGBEE: Max : 0 sec
2023-11-04 10:22:08.253 Status: ZIGBEE: Average : 0 sec
2023-11-04 10:22:08.253 Status: ZIGBEE: ZiGate processing time on Rx
2023-11-04 10:22:08.253 Status: ZIGBEE: Max : 0 sec
2023-11-04 10:22:08.253 Status: ZIGBEE: Average : 0 sec
2023-11-04 10:22:08.253 Status: ZIGBEE: Sent:
2023-11-04 10:22:08.253 Status: ZIGBEE: TX commands : 6
2023-11-04 10:22:08.253 Status: ZIGBEE: Max Load (Queue) : 4
2023-11-04 10:22:08.253 Status: ZIGBEE: Max aPDU (Queue) : 0
2023-11-04 10:22:08.253 Status: ZIGBEE: Max nPDU (Queue) : 0
2023-11-04 10:22:08.253 Status: ZIGBEE: TX failed : 0 (0.0%)
2023-11-04 10:22:08.253 Status: ZIGBEE: TX timeout : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: TX data timeout : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: TX reTransmit : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: TX APS Failure : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: TX APS Ack : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: TX APS Nck : 0 (0.0%)
2023-11-04 10:22:08.254 Status: ZIGBEE: Received:
2023-11-04 10:22:08.255 Status: ZIGBEE: RX frame : 36
2023-11-04 10:22:08.255 Status: ZIGBEE: RX crc errors : 0 (0.0%)
2023-11-04 10:22:08.255 Status: ZIGBEE: RX lentgh errors : 0 (0.0%)
2023-11-04 10:22:08.255 Status: ZIGBEE: RX clusters : 0
2023-11-04 10:22:08.255 Status: ZIGBEE: RX clusters KO : 0
2023-11-04 10:22:08.256 Status: ZIGBEE: Operating time : 0 Hours 0 Mins 33 Secs
2023-11-04 10:22:08.261 ZIGBEE: logging_thread - ended
2023-11-04 10:22:08.264 ZIGBEE: Logging Thread shutdown
2023-11-04 10:22:08.264 ZIGBEE: onStop called (6) Close Logging Management
2023-11-04 10:22:08.586 Status: ZIGBEE: Exiting work loop.
2023-11-04 10:22:08.678 Status: ZIGBEE: Stopping threads.
2023-11-04 10:22:08.678 Status: ZIGBEE: Stopped.
2023-11-04 10:22:08.679 ZIGBEE: Worker thread started.
2023-11-04 10:22:08.679 Status: ZIGBEE: Started.
2023-11-04 10:22:08.679 Status: ZIGBEE: Entering work loop.
100 50 100 50 0 0 4 0 0:00:12 0:00:10 0:00:02 11
{
"status" : "OK",
"title" : "UpdateHardware"
}
2023-11-04 10:22:09.679 Status: ZIGBEE: Initialized version 7.1, author 'pipiche38'
2023-11-04 10:22:09.681 Status: ZIGBEE: Zigbee for Domoticz plugin starting
2023-11-04 10:22:09.681 Status: ZIGBEE: Z4D plugin requires python3 3.8 or above and you are running 3.9
2023-11-04 10:22:09.682 Status: ZIGBEE: Checking Python modules /opt/domoticz/userdata/plugins/Domoticz-Zigbee/requirements.txt
2023-11-04 10:22:10.530 ZIGBEE: load PluginConf
2023-11-04 10:22:10.532 ZIGBEE: Loading PluginConf - from Domoticz sqlite Db
2023-11-04 10:22:10.533 ZIGBEE: /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf/PluginConf-09.json timestamp is 1699089705.9603348
2023-11-04 10:22:10.533 ZIGBEE: Dz PluginConf is older than Json Dz: 0 Json: 1699089705.9603348
2023-11-04 10:22:10.535 Status: ZIGBEE: channel set to 25
2023-11-04 10:22:10.535 Status: ZIGBEE: filename set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf/PluginConf-09.json
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginHome set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee
2023-11-04 10:22:10.535 Status: ZIGBEE: homedirectory set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginData set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Data
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginConfig set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Conf
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginOTAFirmware set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/OTAFirmware
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginReports set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Reports
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginWWW set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/www
2023-11-04 10:22:10.535 Status: ZIGBEE: pluginLogs set to /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Logs
2023-11-04 10:22:10.535 Status: ZIGBEE: ControllerInRawMode set to True
2023-11-04 10:22:10.535 Status: ZIGBEE: expJsonDatabase set to 0
2023-11-04 10:22:10.535 Status: ZIGBEE: ControllerInRawMode set to True
2023-11-04 10:22:10.536 ZIGBEE: Installing plugin custom page /opt/domoticz/www/templates/ZIGBEE.html
2023-11-04 10:22:10.537 ZIGBEE: Starting LoggingManagement thread
2023-11-04 10:22:10.537 ZIGBEE: zigpy_login_mode(30)
2023-11-04 10:22:10.540 ZIGBEE: start_logging_thread
2023-11-04 10:22:10.540 ZIGBEE: logging_thread - listening
2023-11-04 10:22:10.541 Status: ZIGBEE: Please watch plugin log into /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Logs/PluginZigbee_09.log
2023-11-04 10:22:10.549 Status: ZIGBEE: Zigbee for Domoticz (z4d) plugin stable7-7.1.004 started
2023-11-04 10:22:10.566 Status: ZIGBEE: Loading ZCL Cluster definitions
2023-11-04 10:22:10.568 Status: ZIGBEE: - ZCL Cluster 0000 - (V1) Basic loaded
2023-11-04 10:22:10.570 Status: ZIGBEE: - ZCL Cluster 0001 - (V1) Power loaded
2023-11-04 10:22:10.571 Status: ZIGBEE: - ZCL Cluster 0002 - (V1) Device Temperature Configuration loaded
2023-11-04 10:22:10.572 Status: ZIGBEE: - ZCL Cluster 0003 - (V1) Identify loaded
2023-11-04 10:22:10.574 Status: ZIGBEE: - ZCL Cluster 0004 - (V1) Groups loaded
2023-11-04 10:22:10.575 Status: ZIGBEE: - ZCL Cluster 0005 - (V1) Scenes loaded
2023-11-04 10:22:10.576 Status: ZIGBEE: - ZCL Cluster 0006 - (V1) On/Off loaded
2023-11-04 10:22:10.577 Status: ZIGBEE: - ZCL Cluster 0007 - (V1) On/Off Switch Configuration loaded
2023-11-04 10:22:10.579 Status: ZIGBEE: - ZCL Cluster 0008 - (V1) Level loaded
2023-11-04 10:22:10.580 Status: ZIGBEE: - ZCL Cluster 0009 - (V1) Alarms loaded
2023-11-04 10:22:10.582 Status: ZIGBEE: - ZCL Cluster 000a - (V1) Time loaded
2023-11-04 10:22:10.583 Status: ZIGBEE: - ZCL Cluster 000d - (V1) Analog Output loaded
2023-11-04 10:22:10.584 Status: ZIGBEE: - ZCL Cluster 000f - (V1) Binary Input loaded
2023-11-04 10:22:10.586 Status: ZIGBEE: - ZCL Cluster 0013 - (V1) Multistate Output loaded
2023-11-04 10:22:10.587 Status: ZIGBEE: - ZCL Cluster 0019 - (V1) OTA Upgrade loaded
2023-11-04 10:22:10.589 Status: ZIGBEE: - ZCL Cluster 0020 - (V1) Poll Control loaded
2023-11-04 10:22:10.590 Status: ZIGBEE: - ZCL Cluster 0102 - (V1) Window Covering loaded
2023-11-04 10:22:10.592 Status: ZIGBEE: - ZCL Cluster 0202 - (V1) Fan Control loaded
2023-11-04 10:22:10.593 Status: ZIGBEE: - ZCL Cluster 0204 - (V1) Thermostat User Interface Configuration loaded
2023-11-04 10:22:10.595 Status: ZIGBEE: - ZCL Cluster 0300 - (V1) Color Control loaded
2023-11-04 10:22:10.596 Status: ZIGBEE: - ZCL Cluster 0301 - (V1) Ballast Configuration loaded
2023-11-04 10:22:10.598 Status: ZIGBEE: - ZCL Cluster 0400 - (V1) Illuminance Level Sensing loaded
2023-11-04 10:22:10.599 Status: ZIGBEE: - ZCL Cluster 0402 - (V1) Temperature Measurement loaded
2023-11-04 10:22:10.600 Status: ZIGBEE: - ZCL Cluster 0403 - (V1) Pressure Measurement loaded
2023-11-04 10:22:10.602 Status: ZIGBEE: - ZCL Cluster 0405 - (V1) Relative Humidity Measurement loaded
2023-11-04 10:22:10.603 Status: ZIGBEE: - ZCL Cluster 0406 - (V1) Occupancy Sensing loaded
2023-11-04 10:22:10.606 Status: ZIGBEE: - ZCL Cluster 0700 - (V1) Price loaded
2023-11-04 10:22:10.608 Status: ZIGBEE: - ZCL Cluster 0702 - (V1) Metering (Smart Energy) loaded
2023-11-04 10:22:10.610 Status: ZIGBEE: - ZCL Cluster 0b01 - (V1) Meter Identification loaded
2023-11-04 10:22:10.611 Status: ZIGBEE: - ZCL Cluster 0b04 - (V1) Electrical Measurement loaded
2023-11-04 10:22:10.613 Status: ZIGBEE: - ZCL Cluster 0b05 - (V1) Diagnostics loaded
2023-11-04 10:22:10.614 Status: ZIGBEE: - ZCL Cluster e000 - (V1) Tuya E000 Private Cluster loaded
2023-11-04 10:22:10.616 Status: ZIGBEE: - ZCL Cluster e001 - (V1) Tuya E001 Private Cluster loaded
2023-11-04 10:22:10.618 Status: ZIGBEE: - ZCL Cluster e002 - (V1) Tuya E002 Private Cluster loaded
2023-11-04 10:22:10.619 Status: ZIGBEE: - ZCL Cluster fcc0 - (V1) LUMI Private Cluster loaded
2023-11-04 10:22:10.621 Status: ZIGBEE: - ZCL Cluster ff66 - (V1) Lixee Zlinky private cluster loaded
2023-11-04 10:22:10.625 Status: ZIGBEE: DeviceConf loaded - 16 confs loaded
2023-11-04 10:22:10.630 Status: ZIGBEE: Local-Device conf loaded - 21 confs loaded
2023-11-04 10:22:10.908 Status: ZIGBEE: Certified Devices loaded - 518 confs loaded
2023-11-04 10:22:10.910 Status: ZIGBEE: load ListOfDevice
2023-11-04 10:22:10.913 Status: ZIGBEE: 1 Entries loaded from /opt/domoticz/userdata/plugins/Domoticz-Zigbee/Data/DeviceList-9.txt
2023-11-04 10:22:10.917 Status: ZIGBEE: Transport mode: ZigpyEZSP
context.c:56: warning: mpd_setminalloc: ignoring request to set MPD_MINALLOC a second time
2023-11-04 10:22:11.085 Error: ZIGBEE: Call to function 'onStart' failed, exception details:
2023-11-04 10:22:11.092 Error: ZIGBEE: Traceback (most recent call last):
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/opt/domoticz/userdata/plugins/Domoticz-Zigbee/plugin.py", line 1563, in onStart
2023-11-04 10:22:11.092 Error: ZIGBEE: _plugin.onStart()
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/opt/domoticz/userdata/plugins/Domoticz-Zigbee/plugin.py", line 631, in onStart
2023-11-04 10:22:11.092 Error: ZIGBEE: from zigpy.config import (CONF_DEVICE, CONF_DEVICE_PATH,
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/zigpy/config/__init__.py", line 34, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: from zigpy.config.validators import (
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/zigpy/config/validators.py", line 9, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: import zigpy.zdo.types as zdo_t
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/zigpy/zdo/__init__.py", line 10, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: import zigpy.util
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/zigpy/util.py", line 15, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: from cryptography.hazmat.primitives.ciphers import Cipher
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/cryptography/hazmat/primitives/ciphers/__init__.py", line 11, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: from cryptography.hazmat.primitives.ciphers.base import (
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/cryptography/hazmat/primitives/ciphers/base.py", line 10, in <module>
2023-11-04 10:22:11.092 Error: ZIGBEE: from cryptography.exceptions import (
2023-11-04 10:22:11.092 Error: ZIGBEE: File "/usr/local/lib/python3.9/dist-packages/cryptography/exceptions.py", line 9, in <module>
2023-11-04 10:22:11.093 Error: ZIGBEE: from cryptography.hazmat.bindings._rust import exceptions as rust_exceptions
2023-11-04 10:22:11.093 Error: ZIGBEE: ImportError: PyO3 modules may only be initialized once per interpreter process
Surement car le plugin est deja demarré.
Je viens de relancer docker pour voir Et je vous tiens informé
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 04 nov. 2023, 11:08
par lacha007
Hello ,
apres relance pas d erreur. Par contre pas moyen de pairer un device
J ai essayé une prise connecté et mon compteur legrand.
Avec la sonoff dois je faire quelque chose de particulier pour le pairing?
Merci
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 04 nov. 2023, 11:22
par Keros
Normalement, il n'y a rien de particulier à faire.
Tu peux nous mettre les logs de démarrage du plugin, de l'activation de l'appairage dans le WebUI et la tentative d'appairage ?
Ton objet est proche de ton coordinateur ?
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 04 nov. 2023, 12:16
par lacha007
J ai mis les logs de démarrage plus haut .
Pour l'appariage je n ai rien dans les log . que dois je ativer pour avoir plus ?
LA prise est a 2m du Pi
Et sinon j ai un device MQTT Client Gateway with LAN interface est ce lui qui peut faire chi....r
Re: Migration Zigate -> SONOFF ZigBee 3.0 USB Dongle Plus
Publié : 04 nov. 2023, 12:33
par Keros
Plus haut, il y a deux démarrages dont un avec des erreurs.
Active le debug pairing, redémarre le plugin et tente un appairage. Mets-nous tous les logs du démarrage jusqu'à la fin du pairing.
Par de raison MQTT Client Gateway soit un problème tant que ce n'est pas avec ZigBee2MQTT.