Reprenez le contrôle de votre domotique
https://easydomoticz.com/forum/
Code : Tout sélectionner
ln -s dev-domoticz domoticzCode : Tout sélectionner
cd
nano ttyAMA0.shCode : Tout sélectionner
#!/bin/bash
# Prepare AMA0
sed 's/console=ttyAMA0,115200//; s/kgdboc=ttyAMA0,115200//; s/console=serial0,115200//' /boot/cmdline.txt > /tmp/zway_install_cmdli$
if [[ -f /etc/inittab ]]
then
sed 's|[^:]*:[^:]*:respawn:/sbin/getty[^:]*ttyAMA0[^:]*||' /etc/inittab > /tmp/zway_install_inittab
fi
# Disable bluetooth Raspberry Pi 3
RPI_BOARD_REVISION=`grep Revision /proc/cpuinfo | cut -d: -f2 | tr -d " "`
if [[ $RPI_BOARD_REVISION == "a02082" || $RPI_BOARD_REVISION == "a22082" ]]
then
echo "Raspberry Pi 3 Detected. Disabling Bluetooth"
systemctl disable hciuart
# Add "dtoverlay=pi3-miniuart-bt" to /boot/config.txt if needed
if [[ ! `grep "dtoverlay=pi3-miniuart-bt" /boot/config.txt` ]]
then
echo "Adding 'dtoverlay=pi3-miniuart-bt' to /boot/config.txt"
echo "dtoverlay=pi3-miniuart-bt" >> /boot/config.txt
fi
echo "!!! Update Raspberry Pi 3 Firmware for stability work with commands:"
echo "sudo apt-get install rpi-update"
echo "sudo rpi-update"
fi
# Transform old DevicesData.xml to new format
if diff /boot/cmdline.txt /tmp/zway_install_cmdline.txt > /dev/null || diff /etc/inittab /tmp/zway_install_inittab > /dev/null
then
rm /tmp/zway_install_cmdline.txt /tmp/zway_install_inittab
else
echo "Preparing AMA0 interface:"
echo " removing 'console=ttyAMA0,115200' and 'kgdboc=ttyAMA0,115200 and 'console=serial0,115200' from kernel command line ($
mv /tmp/zway_install_cmdline.txt /boot/cmdline.txt
echo " removing '*:*:respawn:/sbin/getty ttyAMA0' from /etc/inittab"
mv /tmp/zway_install_inittab /etc/inittab
echo "AMA0 interface reconfigured, please restart Raspberry"
fi
Code : Tout sélectionner
chdmod +x ttyAMA0.sh
sudo ./ttyAMA0.shCode : Tout sélectionner
sudo shutdown -rCode : Tout sélectionner
sudo mv /etc/udev/rules.d/99-com.rules /etc/udev/rules.d/99-com.rules_oldCode : Tout sélectionner
cd
sudo rm -f ttyAMA0.sh