Forum Domoticz en français

Code : Tout sélectionner

!/bin/bash

while :; do
         while [ `gpio  read 1 ` = 1 ]; do 
                curl "http://192.168.1.27:8080/json.htm?type=command&param=switchlight&idx=10&switchcmd=On&level=0"
                sleep 3   #Pour ne pas surcharger le CPU
 
        done
                curl "http://192.168.1.27:8080/json.htm?type=command&param=switchlight&idx=10&switchcmd=Off&level=0"
      sleep 3   
done

Code : Tout sélectionner

#!/usr/bin/python

import RPi.GPIO as GPIO
import time
import urllib

GPIO.setmode(GPIO.BCM)

GPIO.setup(5, GPIO.IN, pull_up_down=GPIO.PUD_UP)

def Loop1(channel):
    if GPIO.input(5):
        urllib.urlopen("http://127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=28&switchcmd=On&level=0")
    else:
        urllib.urlopen("http://127.0.0.1:8080/json.htm?type=command&param=switchlight&idx=28&switchcmd=Off&level=0")

GPIO.add_event_detect(5, GPIO.BOTH, callback=Loop1, bouncetime=200)

while True:
    time.sleep(100)