Forum Domoticz en français

papoo a écrit :

deennoo a écrit :Faute ! Je pensais a un parasole gris et replier ! C'etait pour la blague !

Ce qui serait sympa : personnalisation de l'icone du switch selector en fonction des levels.

deennoo a écrit :
Ce qui serait sympa : personnalisation de l'icone du switch selector en fonction des levels.

fr/) for the moonphase icons
-- note: Only the first (or 'on') icon of a custom iconset is used, so you need 8 different sets of custom icons
-- The icons are referenced by their internal number.

-- Variables to customize ------------------------------------------------
local checkvar = "MoonphaseCheck" -- name of the uservar to check if update is allowed
local checktime = 3600 -- check allowed every x seconds 3600 = 60 min. Check the wundergroud API limitation before changing this
local city = "<YOUR CITY HERE>" -- Your city for Wunderground API
local countryCode = "NL" -- Your country code for Wunderground API
local idxmoonpercentage ='125' -- Your virtual moon percentage illuminated Device ID
local idxmoonage ='131' -- Your virtual moon age Device ID
local idxmoonphase ='132' -- Your virtual moon phase Device ID
local idxmoonrise='124' -- Your virtual moon rise variable ID
local idxmoonset='127' -- Your virtual moon set variable ID
local idxmoonphaseicon = "133" -- Your virtual moon phase icon variable ID
.../…
-- Because there is no api command available to set a custom icon a JSON call is made
-- This requires the following parameters:
-- type = setused (not to be changed)
-- idx = idxmoonphaseicon (not to be changed here)
-- name = Maanfase (This is the Name of the control. You need to pass this value. This name will be displayd in the Domoticz GUI.
-- description = (left empty: no need for a description in the Domoticz GUI)
-- switchtype = 0 (not to be changed)
-- customimage = moonPhaseIcon (not to be changed here)
-- devoptions = 1;%20 (This is the 'axis-label'. Because only a number is sent a space (%20) is given as axis-label, resulting in no axis-label in Domoticz GUI (not to be changed)
…/…

papoo a écrit : Si tu y comprends quelque chose