Forum Domoticz en français

Code : Tout sélectionner

if [ $(expr ${RAINVAL} '<' ${RAINLIMIT}) = 1 -a  $(expr ${RAINVAL6H} '<' ${RAINLIMIT}) = 1 -a  $(expr ${RAINVAL12H} '<' ${RAINLIMIT}) = 1] ; then

Code : Tout sélectionner

#!/bin/bash
# Settings

# Variables pour Forecast.io
API="2t346701e1907dfc95b357527fedc5"
LAT="42.4004"
LON="2.6083"
#Variables pour Domoticz
DOMO_IP="192.168.0.5"           # Domoticz IP Address
DOMO_PORT="8080"                # Domoticz Port
ARROSAGE_SCENE_IDX="124"         # IDX Groupe arrosage auto
ARROSAGE_STATUS=""         # IDX Groupe arrosage auto
RAINLIMIT=0.2 #Seuil de declemchement de l arrosage
ACTION=$1
#
# Test du parametre action (on/off)
if [ -z ${ACTION} ] ;
then
  echo "Manque 1er parametre on/off"
  exit 0
elif [ ${ACTION} !=  "on" -a  ${ACTION} != "off" ] ;
then
  echo "Le 1er parametre doit etre egal a on ou off"
  exit 0
fi

#On teste si l'arrosage est en route, sinon pas besoin de l'arreter en cas de off
if [ ${ACTION} = "off" ] ;
then
   ARROSAGE_STATUS=$(curl -s -i -H "Accept: application/json" "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=scenes" | egrep -w -m1 -A6 "Arrosage" |grep "Status" | cut -d'"' -f4)
#  echo "ARROSAGE_STATUS:${ARROSAGE_STATUS}"
  if [ ${ARROSAGE_STATUS} = "Off" ] ;
  then
  echo "Pas besoin d'arreter l'arrosage, il est deja arrete ! "
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message='Pas%20besoin%20d%20arreter%20l%20arrosage,il%20est%20deja%20arrete%20!'"
  exit 0
  fi
fi

#On recupere la valeur RAINVAL correspondant a la moyenne de precipitation sous 24H
RAINVAL=$(curl -s -i -H "Accept: application/json" "https://api.forecast.io/forecast/$API/$LAT,$LON?units=ca&exclude=currently,minutely,hourly,alerts,flags" | grep precipIntensity| cut -d, -f14 |cut -d: -f2 | cut -c 1-3)
echo "RAINVAL : ${RAINVAL}"

#On traite le cas de l activation de l arrosage (action=om)
if [ ${ACTION} = "on" ] ;
then
  if [ $(expr ${RAINVAL} '<' ${RAINLIMIT}) = 1 ] ; then
    echo "Il ne va pas pleuvoir, on peut lancer l arrosage !"
    curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message='Il%20ne%20va%20pas%20pleuvoir,%20on%20lance%20l%20arrosage'"
    curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=switchscene&idx=${ARROSAGE_SCENE_IDX}&switchcmd=On"
  else
    echo "Il va pleuvoir, pas besoin d arroser"
    curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message='Il%20va%20pleuvoir,%20pas%20besoin%20d%20arroser'"
  fi
else
# On traite le cas d arret de l arrosage
  echo "Arret de l arrosage auto !"
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=switchscene&idx=${ARROSAGE_SCENE_IDX}&switchcmd=Off"
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message='Arret%20de%20l%20arrosage%20auto%20!'"
fi