Re: Thermostat fan mode
Publié : 22 oct. 2019, 17:59
Salut,
A priori il y a un plugin pour les thermostats Honeywell (Menu "Réglages" => "Matériel")
Le wiki indique :
The honeywell hardware currently adds the following devices to Domoticz. The state of the devices is polled every 300 seconds.
1) Temperature indoor
2) Temperature outdoor
3) Target setpoint of the heating
4) On/Off switch for the device
5) Away (based on geofencing, true if all participants left the area)
6) Operating state of the system (at the moment of the poll which is every 300 seconds)
J'ignore si cela peut aider …
A priori il y a un plugin pour les thermostats Honeywell (Menu "Réglages" => "Matériel")
- img_002.jpg (93.56 Kio) Consulté 1297 fois
The honeywell hardware currently adds the following devices to Domoticz. The state of the devices is polled every 300 seconds.
1) Temperature indoor
2) Temperature outdoor
3) Target setpoint of the heating
4) On/Off switch for the device
5) Away (based on geofencing, true if all participants left the area)
6) Operating state of the system (at the moment of the poll which is every 300 seconds)
J'ignore si cela peut aider …