Page 4 sur 6
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 06 nov. 2020, 23:43
par jfcjfc
Suite re-test
debugcluster et debug input de :
Zigate : IEEE:5c0272fffe8dcb7d / Modele: TS0043
Domoticz Widget: ZIG_BUR-02/ ZIG_BUR-03 / ZIG_BUR-01
surnom : ZIGR123
Short ID : 887e
même présentation dans dz que 'par jfcjfc » 01 nov. 2020, 18:37'
apparaillage, puis click, double click, click long sur bouton 1, puis 2 puis 3 vers 19h31-32.
puis répétition click, double click, click long sur bouton 1, puis 2 puis 3 vers 19h34-35.
bon courage
vers 23h :
30 Appareillage
31 Integration des widgets configuration/dispositifs, changeùent de nom et verif sur zigate/9440
32 Premier tests télécommande (decrit ci-dessus)
33 répétition des tests
37 répetition comme 32 et comme 33
Les trois widgets ne sont pas modifiés et reste sur 'off'..
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 00:43
par pipiche
tu as fait une mise à jour
avec un git pull ?, car je ne vois pas mes modifs !!
tu dois etre sur la branche beta
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 00:48
par jfcjfc
oui ( 3 files changed, 18 insertions(+), 37 deletions(-))
Code : Tout sélectionner
sh-4.3# git pull
warning: Pulling without specifying how to reconcile divergent branches is
discouraged. You can squelch this message by running one of the following
commands sometime before your next pull:
git config pull.rebase false # merge (the default strategy)
git config pull.rebase true # rebase
git config pull.ff only # fast-forward only
You can replace "git config" with "git config --global" to set a default
preference for all repositories. You can also pass --rebase, --no-rebase,
or --ff-only on the command line to override the configured default per
invocation.
remote: Enumerating objects: 11, done.
remote: Counting objects: 100% (11/11), done.
remote: Compressing objects: 100% (2/2), done.
remote: Total 11 (delta 9), reused 11 (delta 9), pack-reused 0
Unpacking objects: 100% (11/11), 1.52 KiB | 9.00 KiB/s, done.
From https://github.com/pipiche38/Domoticz-Zigate
29899f33..4d4dd4f8 beta -> origin/beta
bded87a6..10eb4114 stable-fix -> origin/stable-fix
Updating 29899f33..4d4dd4f8
Fast-forward
Classes/Transport.py | 6 ++++--
Modules/input.py | 40 +++++++---------------------------------
Modules/timeServer.py | 9 +++++++--
3 files changed, 18 insertions(+), 37 deletions(-)
sh-4.3# git pull
warning: Pulling without specifying how to reconcile divergent branches is
discouraged. You can squelch this message by running one of the following
commands sometime before your next pull:
git config pull.rebase false # merge (the default strategy)
git config pull.rebase true # rebase
git config pull.ff only # fast-forward only
You can replace "git config" with "git config --global" to set a default
preference for all repositories. You can also pass --rebase, --no-rebase,
or --ff-only on the command line to override the configured default per
invocation.
Already up to date.
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 00:53
par pipiche
ben ecoute je ne comprend pas.
je verrais si j'ai l'occasion de commander un Hub Tuya et ce device.
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 11:03
par jfcjfc
c'était la 4.12.026 / 031d
attention erreur sur les horaires 23h26 ppareillage
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 11:24
par pipiche
Petit question , les logs que tu me transfert, ils viennent d'où ? Log de Domoticz ? ou ceux spécifiques du plugin dans Domoticz-Zigate/Log ?
Peux-tu refaire une mise-à-jour
et refaire le test
Merci
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 13:05
par jfcjfc
OK,
c'est les logs de .../domoticz/var/plugins/Domoticz-Zigate/Logs/Zigate.......log
Arret de domoticz, sauvegarde logs, mise à zero des logs (zigate), redémarrage de domoticz ... suite
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 07 nov. 2020, 19:17
par jfcjfc
SYNOLOGY / Dz : 2020.1 / Zigate 4.12.30 - 031d
debugcluster et debuginput de :
Zigate : IEEE: 5c0272fffe8dcb7d / Short ID : dd79 / Modele: TS0043 / surnom : ZIGR1
Domoticz Widget: ZIGR01 / ZIGR02 / ZIGR03
vers 18h :
22 Appareillage (18:22:38.961835 ) et Integration des widgets configuration/dispositifs, changement de nom et vérif sur zigate/9440
26-27 : click, double click, click long sur bouton 1, puis 2 puis 3
29-30 : click, double click, click long sur bouton 1, puis 2 puis 3
Les trois widgets ne sont pas modifiés et reste sur 'off'..
Voici les les logs de la zigate (zigate....) et de dz (domotixz...) entre 18h22 et 18h33
A la lecture ds logs> (Type : 10,20,42? parametres du changement. c'est nvalue?)
Merci d'avance
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 08 nov. 2020, 16:56
par jfcjfc
voici les commandes json qui modifie les quatres états du widget dans dz :
Code : Tout sélectionner
http://ip:8084/json.htm?type=devices&rid=1825
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=10 - click
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=20 - double click
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=30 - click long
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=0 - off
1825 est l'idx du "ZIG_R02"
Cela change les états en instantané.
Re: ZIGBEE TELECOMMANDE TS0043 Loratap
Publié : 08 nov. 2020, 18:29
par pipiche
jfcjfc a écrit : 08 nov. 2020, 16:56
voici les commandes json qui modifie les quatres états du widget dans dz :
Code : Tout sélectionner
http://ip:8084/json.htm?type=devices&rid=1825
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=10 - click
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=20 - double click
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=30 - click long
http://ip:8084/json.htm?type=command¶m=switchlight&idx=1825&switchcmd=Set%20Level&level=0 - off
1825 est l'idx du "ZIG_R02"
Cela change les états en instantané.
Oui, et ?