Forum Domoticz en français

Code : Tout sélectionner

2020-05-02 22:37:51.263 Status: Incoming connection from: 54.87.137.84
2020-05-02 22:37:51.408 Status: LUA: property is temperature
2020-05-02 22:37:51.408 Status: LUA: otherdevices[captor] is 22.0
2020-05-02 22:37:51.408 Status: LUA: values[0] is 22.0
2020-05-02 22:37:51.425 Status: LUA: Device based event fired on 'IFTTT', value 'get:temperature:de la chambre de Lana'

Code : Tout sélectionner

scheme://username:password@host:port/json.htm?type=command&param=udevice&idx=idx&svalue=get:temperature:{{TextField}}

Code : Tout sélectionner

commandArray = {}

local blinds = {
	
}

local captors = {
		["Temperature Salon"]="dusalon danslesalon dusjour danslesjour detouteslespices delamaison"
		["Temperature Cuisine"]="cuisine delacuisine"
}

local sensors = {
	
}

local scenes = {
	
}

local switchs = {
	
}

function round(num, dec)
   if num == 0 then
     return 0
   else
     local mult = 10^(dec or 0)
     return math.floor(num * mult + 0.5) / mult
   end
end

local function get(deviceValue, position)
    local current = 0
	for value in string.gmatch(deviceValue, '([^:]+)') do
		current = current + 1
		if current == position then
            return value
		end
    end
    return value
end

for deviceName,deviceValue in pairs(devicechanged) do
	if deviceName == 'IFTTT' then
		local command = get(deviceValue, 1)
        if command == 'blind' then
            local value = get(deviceValue, 2)
            local text = get(deviceValue, 3):gsub("%W", ""):lower()
            for blind,words in pairs(blinds) do
                for word in words:gmatch("%w+") do
                    if text == word then
                        commandArray[blind] = value
                    end
                end
            end
		elseif command == 'set' then
            local value = get(deviceValue, 3)
            local text = get(deviceValue, 2):gsub("%W", ""):lower()
            for sensor,words in pairs(sensors) do
                for word in words:gmatch("%w+") do
                    if text == word then
                        commandArray[sensor] = 'Set Level: ' .. value
                    end
                end
            end
		elseif command == 'get' then
		    local raw = get(deviceValue, 3)
            local text = raw:gsub("%W", ""):lower()
			local sentences = {}
            for captor,words in pairs(captors) do
                for word in words:gmatch("%w+") do
                    if text == word then
						local property = get(deviceValue, 2)
						local values = {}
						local index = 0
						for value in otherdevices[captor]:gmatch("[^;]+") do
							values[index] = value
							index = index + 1
						end
						if property == 'temperature' then
						print ("property is "..property)
    						print ("otherdevices[captor] is "..otherdevices[captor])
						print ("values[0] is "..tostring(values[0]))
							table.insert(sentences, captor..", "..tostring(values[0]).." °")
						end
						if property == 'humidity' and index > 1 then
							table.insert(sentences, captor..", "..tostring(values[1]).." %")
						end
					
                    end
                end
            end
            local tts = "404"
            if #sentences > 0 then
            	tts = table.concat(sentences, ".")
            end
            		print ("tts is "..tts)
    			 os.execute("gnotify -H 192.168.0.27 -l fr OK")
     			os.execute("gnotify -H 192.168.0.27 -l fr "..tts)
			
		elseif command == 'scene' then
            local text = get(deviceValue, 2):gsub("%W", ""):lower()
            for scene,words in pairs(scenes) do
                for word in words:gmatch("%w+") do
                    if text == word then
                        commandArray['Scene:'..scene] = 'On'
                    end
                end
            end
        elseif command == 'switch' then
            local value = get(deviceValue, 2)
            local text = get(deviceValue, 3):gsub("%W", ""):lower()
            for switch,words in pairs(switchs) do
                for word in words:gmatch("%w+") do
                    if text == word then
                        commandArray[switch] = value
                    end
                end
            end
            for sensor,words in pairs(sensors) do
                for word in words:gmatch("%w+") do
                    if text == word then
                        commandArray[sensor] = value
                    end
                end
            end
        end
    end
end

return commandArray