Forum Domoticz en français

Code : Tout sélectionner

--
-- Domoticz passes information to scripts through a number of global tables
--
-- device changed contains state and svalues for the device that changed.
--   devicechanged['yourdevicename'] = state 
--   devicechanged['svalues'] = svalues string 
--
-- otherdevices, otherdevices_lastupdate and otherdevices_svalues are arrays for all devices: 
--   otherdevices['yourotherdevicename'] = "On"
--   otherdevices_lastupdate['yourotherdevicename'] = "2015-12-27 14:26:40"
--   otherdevices_svalues['yourotherthermometer'] = string of svalues
--
-- uservariables and uservariables_lastupdate are arrays for all user variables: 
--   uservariables['yourvariablename'] = 'Test Value'
--   uservariables_lastupdate['yourvariablename'] = '2015-12-27 11:19:22'
--
-- other useful details are contained in the timeofday table
--   timeofday['Nighttime'] = true or false
--   timeofday['SunriseInMinutes'] = number
--   timeofday['Daytime'] = true or false
--   timeofday['SunsetInMinutes'] = number
--   globalvariables['Security'] = 'Disarmed', 'Armed Home' or 'Armed Away'
--
-- To see examples of commands see: http://www.domoticz.com/wiki/LUA_commands#General
-- To get a list of available values see: http://www.domoticz.com/wiki/LUA_commands#Function_to_dump_all_variables_supplied_to_the_script
--
-- Based on your logic, fill the commandArray with device commands. Device name is case sensitive. 
--
commandArray = {}

-- loop through all the changed devices
for deviceName,deviceValue in pairs(devicechanged) do
    print ("Device based event fired on '"..deviceName.."', value '"..tostring(deviceValue).."'");
--    if (deviceName=='myDevice') then
--        if deviceValue == "On" then
--            print("Device is On")
--        elseif deviceValue == "Off" then
--            commandArray['a device name'] = "On"
--            commandArray['another device name'] = "Off AFTER 10"
--            commandArray['Scene:MyScene'] = "Off"
--            commandArray['Group:My Group'] = "Off AFTER 30"
--        end
--    end
end

return commandArray

Code : Tout sélectionner

--    if (deviceName=='myDevice') then
--        if deviceValue == "10" then
--            print("Device is On")
--        elseif deviceValue == "Off" then
--            commandArray['a device name'] = "On"
--            commandArray['another device name'] = "Off AFTER 10"
--            commandArray['Scene:MyScene'] = "Off"
--            commandArray['Group:My Group'] = "Off AFTER 30"
--        end
--    end

Code : Tout sélectionner

    if (deviceName=='deCONZ - SNZB01P') then
        if deviceValue == "10" then
            if (otherdevices['deCONZ-Eclairage_Froid']== 'On') then
                commandArray['deCONZ-Eclairage_Froid'] = 'Off'
            else
                commandArray['Scene:Light Eclairage_Froid'] = 'On'
            end
        end
    end

Code : Tout sélectionner

print(devicechanged['xxxxxxxxxx'])