J'ai eu deux capteurs de plus d'ajoutés en provenance de mon thermostat, un ZHAPower_voltage et ZHAPower_current. Rien de dramatique, voire même que cela me manquait
Pour le reste, j'avais effectivement suivi le fil mais, avec encore moins que toi, la capacité à le suivre
qui correspond tout à fait à l'attribut 0x001 du cluster 0x0204 de mon thermostat. Même si j'ai encore un peu de mal à faire la distinction entre "parse" et "write" mais c'est un autre sujet. Par contre ton exemple de
ne correspond pas chez moi. Le 0x400 du cluster 0x0204 est chez moi le mode d'affichage de la température (F ou Celsius).
Mais supposons qu'on prend celui-ci, (même si c'est vraiment pas ça qui m’intéresse mais plutôt 0x400 Occupancy ou 0x402 Backlight dans le cluster 0x201 ou mieux encore 0x0010 Outdoor Temp on Display du cluster 0xFF01, mais passons pour l'instant ...) quelles sont les étapes suivantes ? Générer un DFF c'est assez simple mais je mets quoi dedans en plus de ce qu'il y a déjà ?
Code : Tout sélectionner
{
"schema": "devcap1.schema.json",
"manufacturername": "Sinope",
"modelid": "TH1124ZB",
"product": "TH1124ZB",
"sleeper": false,
"status": "Draft",
"path": "/devices/th1124zb.json",
"subdevices": [
{
"type": "$TYPE_THERMOSTAT",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0201"
],
"fingerprint": {
"profile": "0x0104",
"device": "0x0301",
"endpoint": "0x01",
"in": [
"0x0000",
"0x0201",
"0x0204",
"0x0B05"
]
},
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/heatsetpoint",
"description": "Target temperature of a thermostat.",
"default": 0
},
{
"name": "config/mode",
"description": "Mode of the device."
},
{
"name": "config/offset",
"description": "Relative offset to the main measured value.",
"default": 0
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "config/schedule",
"description": "On-device heating schedules."
},
{
"name": "config/schedule_on",
"description": "Determines if on-device schedules for setting the heatsetpoint are currently used or if the thermostat is operated manually."
},
{
"name": "state/lastupdated"
},
{
"name": "state/on",
"description": "True when device is on; false when off.",
"refresh.interval": 5
},
{
"name": "state/temperature",
"description": "The current temperature in °C × 100.",
"default": 0
}
]
},
{
"type": "$TYPE_POWER_SENSOR",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0b04"
],
"fingerprint": {
"profile": "0x0104",
"device": "0x0301",
"endpoint": "0x01",
"in": [
"0x0000",
"0x0B04"
]
},
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "state/current",
"description": "The measured current (in mA).",
"refresh.interval": 300
},
{
"name": "state/lastupdated"
},
{
"name": "state/power",
"description": "The measured power (in W).",
"refresh.interval": 300
},
{
"name": "state/voltage",
"description": "The measured voltage (in V).",
"refresh.interval": 300
}
]
},
{
"type": "$TYPE_CONSUMPTION_SENSOR",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0702"
],
"fingerprint": {
"profile": "0x0104",
"device": "0x0301",
"endpoint": "0x01",
"in": [
"0x0000",
"0x0702"
]
},
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "state/consumption",
"description": "The measured consumption (in Wh).",
"refresh.interval": 300
},
{
"name": "state/lastupdated"
},
{
"name": "state/power",
"description": "The measured power (in W).",
"refresh.interval": 300
}
]
},
{
"type": "$TYPE_TEMPERATURE_SENSOR",
"restapi": "/sensors",
"uuid": [
"$address.ext",
"0x01",
"0x0402"
],
"fingerprint": {
"profile": "0x0104",
"device": "0x0301",
"endpoint": "0x01",
"in": [
"0x0000",
"0x0402"
]
},
"items": [
{
"name": "attr/id"
},
{
"name": "attr/lastannounced"
},
{
"name": "attr/lastseen"
},
{
"name": "attr/manufacturername"
},
{
"name": "attr/modelid"
},
{
"name": "attr/name"
},
{
"name": "attr/swversion"
},
{
"name": "attr/type"
},
{
"name": "attr/uniqueid"
},
{
"name": "config/offset",
"description": "Relative offset to the main measured value.",
"default": 0
},
{
"name": "config/on"
},
{
"name": "config/reachable"
},
{
"name": "state/lastupdated"
},
{
"name": "state/temperature",
"description": "The current temperature in °C × 100.",
"default": 0
}
]
}
]
}
