Forum Domoticz en français

Code : Tout sélectionner

sudo /etc/init.d/domoticz.sh start

Code : Tout sélectionner

/etc/init.d/domoticz.sh: 2: /etc/init.d/domoticz.sh: Read: not found
[....] Starting domoticz.sh (via systemctl): domoticz.serviceJob for domoticz.service failed because the control process exited with error code.
See "systemctl status domoticz.service" and "journalctl -xe" for details.
 failed!

Code : Tout sélectionner

pi@raspberrypi:~ $ systemctl status domoticz.service
● domoticz.service - LSB: Home Automation System
   Loaded: loaded (/etc/init.d/domoticz.sh; generated)
   Active: failed (Result: exit-code) since Wed 2020-06-17 13:34:36 CEST; 59min ago
     Docs: man:systemd-sysv-generator(8)
  Process: 1484 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=203/EXEC)

juin 17 13:34:35 raspberrypi systemd[1]: Starting LSB: Home Automation System...
juin 17 13:34:35 raspberrypi systemd[1484]: domoticz.service: Failed to execute command: Exec format error
juin 17 13:34:35 raspberrypi systemd[1484]: domoticz.service: Failed at step EXEC spawning /etc/init.d/domoticz.sh: Exec format error
juin 17 13:34:36 raspberrypi systemd[1]: domoticz.service: Control process exited, code=exited, status=203/EXEC
juin 17 13:34:36 raspberrypi systemd[1]: domoticz.service: Failed with result 'exit-code'.
juin 17 13:34:36 raspberrypi systemd[1]: Failed to start LSB: Home Automation System.

Code : Tout sélectionner

pi@raspberrypi:~ $ journalctl -xe
juin 17 13:34:35 raspberrypi systemd[1484]: domoticz.service: Failed to execute command: Exec format error
juin 17 13:34:35 raspberrypi systemd[1484]: domoticz.service: Failed at step EXEC spawning /etc/init.d/domoticz.sh: Exec format error
-- Subject: Le processus /etc/init.d/domoticz.sh n'a pas pu être exécuté
-- Defined-By: systemd
-- Support: https://www.debian.org/support
-- 
-- Le processus /etc/init.d/domoticz.sh n'a pas pu être exécuté, et a donc échoué.
-- 
-- Le code d'erreur renvoyé est ERRNO.
juin 17 13:34:36 raspberrypi systemd[1]: domoticz.service: Control process exited, code=exited, status=203/EXEC
-- Subject: Unit process exited
-- Defined-By: systemd
-- Support: https://www.debian.org/support
-- 
-- An ExecStart= process belonging to unit domoticz.service has exited.
-- 
-- The process' exit code is 'exited' and its exit status is 203.
juin 17 13:34:36 raspberrypi systemd[1]: domoticz.service: Failed with result 'exit-code'.
-- Subject: Unit failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
-- 
-- The unit domoticz.service has entered the 'failed' state with result 'exit-code'.
juin 17 13:34:36 raspberrypi systemd[1]: Failed to start LSB: Home Automation System.
-- Subject: L'unité (unit) domoticz.service a échoué
-- Defined-By: systemd
-- Support: https://www.debian.org/support
-- 
-- L'unité (unit) domoticz.service a échoué, avec le résultat failed.
juin 17 13:34:36 raspberrypi sudo[1456]: pam_unix(sudo:session): session closed for user root
juin 17 13:34:43 raspberrypi sudo[1488]:       pi : TTY=pts/0 ; PWD=/home/pi ; USER=root ; COMMAND=/bin/nano /etc/init.d/domoticz.sh
juin 17 13:34:43 raspberrypi sudo[1488]: pam_unix(sudo:session): session opened for user root by (uid=0)
juin 17 13:36:52 raspberrypi sudo[1488]: pam_unix(sudo:session): session closed for user root
juin 17 13:37:35 raspberrypi sudo[1563]:       pi : TTY=pts/0 ; PWD=/home/pi ; USER=root ; COMMAND=/usr/sbin/service domoticz.sh status
juin 17 13:37:35 raspberrypi sudo[1563]: pam_unix(sudo:session): session opened for user root by (uid=0)
juin 17 13:37:35 raspberrypi sudo[1563]: pam_unix(sudo:session): session closed for user root
juin 17 13:40:11 raspberrypi vncserver-x11[452]: Connections: disconnected: 192.168.1.16::53747 (TCP) ([ViewerClosed] VNC Viewer s'est fermé)
juin 17 13:40:11 raspberrypi vncserver-x11[452]: session ended: user root
juin 17 14:17:01 raspberrypi CRON[2189]: pam_unix(cron:session): session opened for user root by (uid=0)
juin 17 14:17:01 raspberrypi CRON[2193]: (root) CMD (   cd / && run-parts --report /etc/cron.hourly)
juin 17 14:17:01 raspberrypi CRON[2189]: pam_unix(cron:session): session closed for user root
juin 17 14:19:31 raspberrypi rngd[388]: stats: bits received from HRNG source: 80064
juin 17 14:19:31 raspberrypi rngd[388]: stats: bits sent to kernel pool: 34848
juin 17 14:19:31 raspberrypi rngd[388]: stats: entropy added to kernel pool: 34848
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2 successes: 4
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2 failures: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2(2001-10-10) Monobit: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2(2001-10-10) Poker: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2(2001-10-10) Runs: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2(2001-10-10) Long run: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS 140-2(2001-10-10) Continuous run: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: HRNG source speed: (min=467.646; avg=686.198; max=933.884)Kibits/s
juin 17 14:19:31 raspberrypi rngd[388]: stats: FIPS tests speed: (min=5.757; avg=6.608; max=7.112)Mibits/s
juin 17 14:19:31 raspberrypi rngd[388]: stats: Lowest ready-buffers level: 2
juin 17 14:19:31 raspberrypi rngd[388]: stats: Entropy starvations: 0
juin 17 14:19:31 raspberrypi rngd[388]: stats: Time spent starving for entropy: (min=0; avg=0.000; max=0)us
juin 17 14:33:47 raspberrypi vncserver-x11[452]: Connections: connected: 192.168.1.16::54533 (TCP)
juin 17 14:33:47 raspberrypi vncserver-x11[452]: session started: user root permissions f
juin 17 14:33:47 raspberrypi vncserver-x11[452]: Connections: authenticated: 192.168.1.16::54533 (TCP), as root (f permissions)
juin 17 14:33:48 raspberrypi vncserver-x11[452]: SPrintConnMgr: Failed to add printer: server-error-service-unavailable
lines 1919-1978/1978 (END)

Code : Tout sélectionner

Read more at: https://www.geekland-leblog.fr/controle-des-gpio-dans-domoticz/#! /bin/sh
### BEGIN INIT INFO
# Provides:          domoticz
# Required-Start:    $network $remote_fs $syslog $time
# Required-Stop:     $network $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Home Automation System
# Description:       This daemon will start the Domoticz Home Automation System
### END INIT INFO

# Do NOT "set -e"

PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
DESC="Domoticz Home Automation System"
NAME=domoticz
USERNAME=pi
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

DAEMON=/home/domoticz/$NAME
DAEMON_ARGS="-daemon"
#DAEMON_ARGS="$DAEMON_ARGS -daemonname $NAME -pidfile $PIDFILE"
DAEMON_ARGS="$DAEMON_ARGS -www 8080"
DAEMON_ARGS="$DAEMON_ARGS -sslwww 443"
#DAEMON_ARGS="$DAEMON_ARGS -log /tmp/domoticz.txt"
#DAEMON_ARGS="$DAEMON_ARGS -syslog"

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

pidof_domoticz() {
    # if there is actually a domoticz process whose pid is in PIDFILE,
    # print it and return 0.
    if [ -e "$PIDFILE" ]; then
        if pidof domoticz | tr ' ' '\n' | grep -w $(cat $PIDFILE); then
            return 0
        fi
    fi
    return 1
}

#
# Function that starts the daemon/service
#
do_start()
{
        # Return
        #   0 if daemon has been started
        #   1 if daemon was already running
        #   2 if daemon could not be started
        start-stop-daemon --chuid $USERNAME --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
                || return 1
        start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
                $DAEMON_ARGS \
                || return 2
}

#
# Function that stops the daemon/service
#
do_stop()
{
        # Return
        #   0 if daemon has been stopped
        #   1 if daemon was already stopped
        #   2 if daemon could not be stopped
        #   other if a failure occurred
        start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
        RETVAL="$?"
        [ "$RETVAL" = 2 ] && return 2
        # Wait for children to finish too if this is a daemon that forks
        # and if the daemon is only ever run from this initscript.
        # If the above conditions are not satisfied then add some other code
        # that waits for the process to drop all resources that could be
        # needed by services started subsequently.  A last resort is to
        # sleep for some time.
        start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
        [ "$?" = 2 ] && return 2
        # Many daemons don't delete their pidfiles when they exit.
        rm -f $PIDFILE
        return "$RETVAL"
}

case "$1" in
  start)
        [ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
        do_start
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  stop)
        [ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
        do_stop
        case "$?" in
                0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
                2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
        esac
        ;;
  status)
        status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
        ;;
  reload)
        log_daemon_msg "Reloading $DESC" "$NAME"
        PID=$(pidof_domoticz) || true
        if [ "${PID}" ]; then
                kill -HUP $PID
                log_end_msg 0
        else
                log_end_msg 1
        fi
        ;;
  restart)
        log_daemon_msg "Restarting $DESC" "$NAME"
        do_stop
        case "$?" in
          0|1)
                do_start
                case "$?" in
                        0) log_end_msg 0 ;;
                        1) log_end_msg 1 ;; # Old process is still running
                        *) log_end_msg 1 ;; # Failed to start
                esac
                ;;
          *)
                # Failed to stop
                log_end_msg 1
                ;;
        esac
        ;;
  *)
        echo "Usage: $SCRIPTNAME {start|stop|status|restart|reload}" >&2
        exit 3
        ;;
esac

: