Forum Domoticz en français

Bonjour j'ai un probleme apprentissage de code,la lumiere s'allume envois du code de telecommande et erreur je ne sais plus quoi faire des jours que je suis dessus auriez vous une idée?
autre chose aucun plugins broadlink ne fonctionne

merci d'avance


voila les logs

2020-10-30 15:46:16.275 Status: (broadlink 2) Started.
2020-10-30 15:46:16.276 Status: NotificationSystem: thread started...
2020-10-30 15:46:16.276 Status: EventSystem: reset all events...
2020-10-30 15:46:16.277 Status: EventSystem: reset all device statuses...
2020-10-30 15:46:16.375 Status: Python EventSystem: Initalizing event module.
2020-10-30 15:46:16.376 Status: EventSystem: Started
2020-10-30 15:46:16.376 Status: EventSystem: Queue thread started...
2020-10-30 15:46:16.644 Status: PluginSystem: Entering work loop.
2020-10-30 15:46:17.080 Status: (broadlink 2) Entering work loop.
2020-10-30 15:46:17.080 Status: (broadlink 2) Initialized version 0.1.4, author 'Whilser'
2020-10-30 15:46:25.416 (broadlink 2) Connected to Broadlink device type RM2 with IP address = 192.168.1.27 and Mac address = 780f7763b953
2020-10-30 15:46:33.954 Status: User: Admin initiated a switch command (71/broadlink 2 - Command/Set Level)
2020-10-30 15:46:35.030 (broadlink 2) Code Learned
2020-10-30 15:46:35.030 Error: (broadlink 2) broadlink 2 is not responding, check power/network connection. Error: <class 'broadlink.exceptions.ReadError'>
2020-10-30 15:46:35.030 Error: (broadlink 2) No IR command received!
2020-10-30 15:46:44.464 (broadlink 2) Connected to Broadlink device type RM2 with IP address = 192.168.1.27 and Mac address = 780f7763b953