Forum Domoticz en français

Estimant que le Z-stick devrait être en USB1, un

pi@raspberrypi ~ $ sudo udevadm info --query=all --name=ttyACM0
P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/tty/ttyACM0
N: ttyACM0
S: serial/by-id/usb-0658_0200-if00
S: serial/by-path/platform-3f980000.usb-usb-0:1.4:1.0
E: DEVLINKS=/dev/serial/by-id/usb-0658_0200-if00 /dev/serial/by-path/platform-3f980000.usb-usb-0:1.4:1.0
E: DEVNAME=/dev/ttyACM0
E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/tty/ttyACM0
E: ID_BUS=usb
E: ID_MODEL=0200
E: ID_MODEL_ENC=0200
E: ID_MODEL_ID=0200
E: ID_PATH=platform-3f980000.usb-usb-0:1.4:1.0
E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_4_1_0
E: ID_REVISION=0000
E: ID_SERIAL=0658_0200
E: ID_TYPE=generic
E: ID_USB_DRIVER=cdc_acm
E: ID_USB_INTERFACES=:020201:0a0000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=0658
E: ID_VENDOR_ENC=0658
E: ID_VENDOR_FROM_DATABASE=Sigma Designs, Inc.
E: ID_VENDOR_ID=0658
E: MAJOR=166
E: MINOR=0
E: SUBSYSTEM=tty
E: UDEV_LOG=3
E: USEC_INITIALIZED=2348933