Forum Domoticz en français

Reprenez le contrôle de votre domotique
https://easydomoticz.com/forum/

dzvents.lua error timeout

https://easydomoticz.com/forum/viewtopic.php?t=13186

Page 1 sur 2

dzvents.lua error timeout

Publié : 03 avr. 2023, 08:47
par pierrotori
Bonjour
j'ai depuis quelques temps cette erreur dans la log

Code : Tout sélectionner

2023-04-03 08:00:10.359 Error: EventSystem: Warning!, lua script /opt/domoticz/dzVents/runtime/dzVents.lua has been running for more than 10 seconds
j'ai mis en mode debug pour analyser mais j'ai rien trouvé, c'est un process interne qui tourne tous les 5 minutes
Merci pour votre aide

Bonne journée

Re: dzvents.lua error timeout

Publié : 03 avr. 2023, 12:35
par Keros
Il se peut que les exécutions prennent plus de temps car les temps d'écriture sur ton stockage serait plus long. Regarde si tu n'as pas de pic de I/O. Tu peux le voir avec NetData par exemple.

Re: dzvents.lua error timeout

Publié : 03 avr. 2023, 13:44
par Neutrino
C'est peut-être un os.execute() qui prend trop de temps ?

Re: dzvents.lua error timeout

Publié : 03 avr. 2023, 15:10
par pierrotori
ou un problème en RAM, j'ai passé cette commande
avant
pi@raspberrypi:~ $ free
total utilisé libre partagé tamp/cache disponible
Mem: 944104 328740 55844 48012 559520 502028
Partition d'échange: 0 0 0

Cela affiche la RAM utilisée, la vide puis ré-affiche la RAM utilisée pour montrer le gain de mémoire vive.

Code : Tout sélectionner

free -h && sudo sysctl vm.drop_caches=3 && free -h
après
pi@raspberrypi:~ $ free
total utilisé libre partagé tamp/cache disponible
Mem: 944104 349012 168076 48036 427016 494368
Partition d'échange: 0 0 0

A vérifier si cela se reproduit de repasser la commande pour voir si ca s'arrête, mais je soupçonne le script livebox de faire des I/O,en autre cette fonction

Code : Tout sélectionner

        function os.capture(cmd, raw)
            local f = assert(io.popen(cmd, 'r'))
            local s = assert(f:read('*a'))
            f:close()
            if raw then return s end
            s = string.gsub(s, '^%s+', '')
            s = string.gsub(s, '%s+$', '')
            s = string.gsub(s, '[\n\r]+', ' ')
            return s
        end
je vais faire un test NetData

Re: dzvents.lua error timeout

Publié : 04 avr. 2023, 21:13
par pierrotori
petit debug pour voir les scripts qui sont executés

Code : Tout sélectionner

04/04/23 21:00:00 - 04/04/23 21:00:04 (04 - 0.2377)                        t_agenda.lua << timer: "every 1 hours"
04/04/23 21:00:04 - 04/04/23 21:00:06 (02 - 1.3646)              t_description_univ.lua << timer: "every minute"
04/04/23 21:00:06 - 04/04/23 21:00:06 (00 - 0.0032)                   t_device_dead.lua << timer: "every 30 minutes at 08:00-21:00"
04/04/23 21:00:06 - 04/04/23 21:00:08 (02 - 0.6568)                      t_livebox5.lua << timer: "every 3 minutes"
04/04/23 21:00:08 - 04/04/23 21:00:08 (00 - 0.0037)                    t_moon_phase.lua << timer: "every hours"
04/04/23 21:00:08 - 04/04/23 21:00:08 (00 - 0.0037)                    t_notif_user.lua << timer: "every 5 minutes at 08:00-21:00"
04/04/23 21:00:08 - 04/04/23 21:00:13 (05 - 0.3979)                      t_sinology.lua << timer: "every hour"
04/04/23 21:00:13 - 04/04/23 21:00:14 (01 - 0.4853)                   t_sun_azimuth.lua << timer: "every hours at nighttime"
04/04/23 21:00:14 - 04/04/23 21:00:14 (00 - 0.0161)                   t_sun_package.lua << timer: "every hours at nighttime"
04/04/23 21:00:14 - 04/04/23 21:00:15 (01 - 0.2805)                   t_device_dead.lua << HTTPResponse: "getDevices"
et la log

Code : Tout sélectionner

2023-04-04 21:00:00.603  Status: dzVents: Debug: Dumping domoticz data to /opt/domoticz/userdata/scripts/dzVents/domoticzData.lua
2023-04-04 21:00:00.720  Status: dzVents: Debug: Event triggers:
2023-04-04 21:00:00.720  Status: dzVents: Debug: - Timer
2023-04-04 21:00:00.822  Status: dzVents: Info: CALENDRIER v2.1: ------ Start external script: t_agenda.lua:, trigger: "every 1 hours"
2023-04-04 21:00:00.824  Status: dzVents: Info: CALENDRIER v2.1: ============== AGENDA ==============
2023-04-04 21:00:00.863  Status: dzVents: Debug: CALENDRIER v2.1: Processing device-adapter for Internet: Switch device adapter
2023-04-04 21:00:00.864  Status: dzVents: Debug: CALENDRIER v2.1: Déclenchement timer
2023-04-04 21:00:00.865  Status: dzVents: Debug: CALENDRIER v2.1: MAJ Calendrier homebude
2023-04-04 21:00:00.865  Status: dzVents: Debug: CALENDRIER v2.1: gcalcli --cal=
2023-04-04 21:00:04.799  Status: dzVents: Info: CALENDRIER v2.1: Debut lecture Fichier google Calendrier
2023-04-04 21:00:04.799  Status: dzVents: Debug: CALENDRIER v2.1: Fin Fichier google Calendrier
2023-04-04 21:00:04.800  Status: dzVents: Info: CALENDRIER v2.1: ------ Finished t_agenda.lua
2023-04-04 21:00:04.801  Status: dzVents: !Info: CALENDRIER v2.1: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:04.801  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: ------ Start external script: t_description_univ.lua:, trigger: "every minute"
2023-04-04 21:00:05.823  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: ============== DESCRIPTION-UNIV ==================
2023-04-04 21:00:05.823  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Déclenchement timer
2023-04-04 21:00:05.826  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for lampe1 du salon: Switch device adapter
2023-04-04 21:00:05.828  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for lampe2 du salon: Switch device adapter
2023-04-04 21:00:05.830  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for tv salon 3: Switch device adapter
2023-04-04 21:00:05.832  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for volet de la cuisine: Switch device adapter
2023-04-04 21:00:05.835  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for volet de la chambre: Switch device adapter
2023-04-04 21:00:05.837  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for volet du salon: Switch device adapter
2023-04-04 21:00:05.839  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for volet2 du salon: Switch device adapter
2023-04-04 21:00:05.841  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for mode_semaine: Switch device adapter
2023-04-04 21:00:05.844  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for mode_weekend: Switch device adapter
2023-04-04 21:00:05.846  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for mode_absent: Switch device adapter
2023-04-04 21:00:05.848  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for RPI_CPU_Usage: Percentage device adapter
2023-04-04 21:00:05.851  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for rpi_temperature: Temperature device adapter
2023-04-04 21:00:05.853  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for rpi_memory_usage: Percentage device adapter
2023-04-04 21:00:05.855  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for RPI_HDD_boot: Percentage device adapter
2023-04-04 21:00:05.857  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for notification_agenda: Text device
2023-04-04 21:00:05.860  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for mode_confort: Switch device adapter
2023-04-04 21:00:05.862  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for altitude_calculer: Custom sensor device adapter
2023-04-04 21:00:05.864  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for lux_calculer: Lux device adapter
2023-04-04 21:00:05.866  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for radiation_calculer: Solar radiation device adapter
2023-04-04 21:00:05.868  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for alerte_pollen: Alert sensor  adapter
2023-04-04 21:00:05.870  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for store_assist: Switch device adapter
2023-04-04 21:00:05.872  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for alerte_givre: Alert sensor  adapter
2023-04-04 21:00:05.874  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for nas_temp: Temperature device adapter
2023-04-04 21:00:05.876  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for nas_cpu: Percentage device adapter
2023-04-04 21:00:05.878  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for hdd_temp: Temperature device adapter
2023-04-04 21:00:05.880  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Livebox 5: Switch device adapter
2023-04-04 21:00:05.882  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for notification_utilisateur: Text device
2023-04-04 21:00:05.884  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM-3H: Rain device
2023-04-04 21:00:05.886  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM-6H: Rain device
2023-04-04 21:00:05.887  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM-9H: Rain device
2023-04-04 21:00:05.889  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM-12H: Rain device
2023-04-04 21:00:05.891  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for alerte_pollution: Alert sensor  adapter
2023-04-04 21:00:05.893  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for alerte_moustiques: Alert sensor  adapter
2023-04-04 21:00:05.895  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for alerte_pluie: Alert sensor  adapter
2023-04-04 21:00:05.897  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM-jour: Rain device
2023-04-04 21:00:05.899  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_temps: Text device
2023-04-04 21:00:05.901  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_THB: Temperature+humidity+barometer device adapter
2023-04-04 21:00:05.903  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_ressentie: Temperature device adapter
2023-04-04 21:00:05.905  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_vent: Wind device adapter
2023-04-04 21:00:05.907  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_UVI: UV device adapter
2023-04-04 21:00:05.909  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_visibilite: Visibility device
2023-04-04 21:00:05.911  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_nuage: Percentage device adapter
2023-04-04 21:00:05.913  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_pluie: Rain device
2023-04-04 21:00:05.914  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for OWM_alerte_pluie: Switch device adapter
2023-04-04 21:00:05.916  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for température serre: Temperature+humidity device adapter
2023-04-04 21:00:05.918  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: la période silencieuse de notification pour température serre est définie entre  23:00-08:00
2023-04-04 21:00:05.918  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: température serre a un seuil temperature haute défini à  31°C
2023-04-04 21:00:05.918  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: température serre a un seuil temperature basse défini à  11°C
2023-04-04 21:00:05.918  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: Le niveau de batterie de température serre est de  100%
2023-04-04 21:00:05.925  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: La température mesurée par température serre est de  22.5°C
2023-04-04 21:00:05.932  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: L'hygrometrie mesurée par température serre est de  41%hr
2023-04-04 21:00:05.934  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for nas_disque1: Custom sensor device adapter
2023-04-04 21:00:05.936  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for chauffage modes: Switch device adapter
2023-04-04 21:00:05.939  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Temperature Mode-eco: Thermostat setpoint device adapter
2023-04-04 21:00:05.941  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Temperature Mode-confort: Thermostat setpoint device adapter
2023-04-04 21:00:05.943  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Temperature Mode-absent: Thermostat setpoint device adapter
2023-04-04 21:00:05.945  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Chaudière: Switch device adapter
2023-04-04 21:00:05.947  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Chaudière Vanne 3V: Switch device adapter
2023-04-04 21:00:05.950  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Plancher Vanne 3V: Switch device adapter
2023-04-04 21:00:05.952  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Download: Custom sensor device adapter
2023-04-04 21:00:05.954  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Latence: Custom sensor device adapter
2023-04-04 21:00:05.956  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Téléphone Pierre: Switch device adapter
2023-04-04 21:00:05.958  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Portail: Switch device adapter
2023-04-04 21:00:05.961  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for porte poule action: Switch device adapter
2023-04-04 21:00:05.963  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for run_script: Switch device adapter
2023-04-04 21:00:05.965  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for reset_sabotage: Switch device adapter
2023-04-04 21:00:05.967  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for saison: Switch device adapter
2023-04-04 21:00:05.969  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for lune: Switch device adapter
2023-04-04 21:00:05.972  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for octa_calculer: Custom sensor device adapter
2023-04-04 21:00:05.974  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for azimut_calculer: Custom sensor device adapter
2023-04-04 21:00:05.976  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for azimut_soleil: Custom sensor device adapter
2023-04-04 21:00:05.978  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Upload: Custom sensor device adapter
2023-04-04 21:00:05.980  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for altitude_soleil: Custom sensor device adapter
2023-04-04 21:00:05.982  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for porte_salon_door_state: Switch device adapter
2023-04-04 21:00:05.985  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for porte_chambre_door-window: Switch device adapter
2023-04-04 21:00:05.987  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for fenêtre_cuisine_door_state: Switch device adapter
2023-04-04 21:00:05.989  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cuisine_event_general_purpose: Switch device adapter
2023-04-04 21:00:05.991  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cuisine_event_water_leak: Switch device adapter
2023-04-04 21:00:05.993  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cave_event_general_purpose: Switch device adapter
2023-04-04 21:00:05.995  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cave_event_water_leak: Switch device adapter
2023-04-04 21:00:05.997  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for sirene_salle_switch: Switch device adapter
2023-04-04 21:00:05.999  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cave_temperature_air_2: Temperature device adapter
2023-04-04 21:00:06.001  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for inondation_cuisine_temperature_air_2: Temperature device adapter
2023-04-04 21:00:06.003  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Téléphone Jeanne: Switch device adapter
2023-04-04 21:00:06.005  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Téléphone Antoine: Switch device adapter
2023-04-04 21:00:06.007  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Téléphone Anne: Switch device adapter
2023-04-04 21:00:06.009  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Appels manqués: Text device
2023-04-04 21:00:06.011  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Appels sans réponse: Text device
2023-04-04 21:00:06.013  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Appels réussis: Text device
2023-04-04 21:00:06.015  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Effacer liste appels: Switch device adapter
2023-04-04 21:00:06.017  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Reboot Livebox: Switch device adapter
2023-04-04 21:00:06.019  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for firmware: Text device
2023-04-04 21:00:06.021  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for ipv4: Text device
2023-04-04 21:00:06.023  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Temps total: Text device
2023-04-04 21:00:06.025  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Livebox_wifi2G: Switch device adapter
2023-04-04 21:00:06.027  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Livebox_wifi5G: Switch device adapter
2023-04-04 21:00:06.029  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Sonner: Switch device adapter
2023-04-04 21:00:06.031  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for jour_férié: Switch device adapter
2023-04-04 21:00:06.032  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for vacances_scolaires: Switch device adapter
2023-04-04 21:00:06.034  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for SWITCH1-ALARM: Switch device adapter
2023-04-04 21:00:06.036  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Prise3-Entrée cam: Switch device adapter
2023-04-04 21:00:06.038  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for reset_calcul: Switch device adapter
2023-04-04 21:00:06.040  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for nas_DS213j: Switch device adapter
2023-04-04 21:00:06.042  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for porte poule: Switch device adapter
2023-04-04 21:00:06.044  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for iot wifi update: Switch device adapter
2023-04-04 21:00:06.046  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for incendie_étage1_smoke_alarm: Switch device adapter
2023-04-04 21:00:06.048  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for incendie_étage1_temperature_air: Temperature device adapter
2023-04-04 21:00:06.050  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for incendie_cave_smoke_alarm: Switch device adapter
2023-04-04 21:00:06.052  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for incendie_cave_temperature_air: Temperature device adapter
2023-04-04 21:00:06.054  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Signal RxPower: Custom sensor device adapter
2023-04-04 21:00:06.056  Status: dzVents: Debug: DESCRIPTION-UNIV v1.13: Processing device-adapter for Signal TxPower: Custom sensor device adapter
2023-04-04 21:00:06.056  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: 106 devices scannés.
2023-04-04 21:00:06.216  Status: dzVents: Info: DESCRIPTION-UNIV v1.13: ------ Finished t_description_univ.lua
2023-04-04 21:00:06.216  Status: dzVents: !Info: DESCRIPTION-UNIV v1.13: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:06.216  Status: dzVents: Info: Device_Dead v1.0: ------ Start external script: t_device_dead.lua:, trigger: "every 30 minutes at 08:00-21:00"
2023-04-04 21:00:06.218  Status: dzVents: Info: Device_Dead v1.0: ============== DEVICE DEAD LOG ==================
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: Déclenchement timer
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: OpenURL: url = http://127.0.0.1:8080/json.htm?type=devices&used=true&username=&password=
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: OpenURL: method = GET
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: OpenURL: post data = nil
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: OpenURL: headers = nil
2023-04-04 21:00:06.218  Status: dzVents: Debug: Device_Dead v1.0: OpenURL: callback = getDevices
2023-04-04 21:00:06.220  Status: dzVents: Info: Device_Dead v1.0: ------ Finished t_device_dead.lua
2023-04-04 21:00:06.220  Status: dzVents: !Info: Device_Dead v1.0: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:06.220  Status: dzVents: Info: Livebox5 1.20: ------ Start external script: t_livebox5.lua:, trigger: "every 3 minutes"
2023-04-04 21:00:06.221  Status: dzVents: Info: Livebox5 1.20: ============== LIVEBOX 5 LOG ==================
2023-04-04 21:00:06.221  Status: dzVents: Debug: Livebox5 1.20: Déclenchement timer
2023-04-04 21:00:06.336  Status: dzVents: Debug: Livebox5 1.20: Context : 
2023-04-04 21:00:06.529  Status: dzVents: Debug: Livebox5 1.20: MIBs :2023-04-04 21:00:06.578  Status: dzVents: Info: Livebox5 1.20: ATM Down: -18416
2023-04-04 21:00:06.579  Status: dzVents: Info: Livebox5 1.20: ATM Up: 1357
2023-04-04 21:00:07.020  Status: dzVents: Debug: Livebox5 1.20: wifi :***
2023-04-04 21:00:07.199  Status: dzVents: Info: Livebox5 1.20: Wifi 2.4 Ghz : Down
2023-04-04 21:00:07.199  Status: dzVents: Info: Livebox5 1.20: Wifi 5 Ghz : Down
2023-04-04 21:00:07.706  Status: dzVents: Debug: Livebox5 1.20: LAN : ***
2023-04-04 21:00:08.014  Status: dzVents: Info: Livebox5 1.20: Version Firmware : SGFI-fr-4.66.0.1_10.5.0
2023-04-04 21:00:08.015  Status: dzVents: Info: Livebox5 1.20: Uptime : 1:02:06:15
2023-04-04 21:00:08.015  Status: dzVents: Info: Livebox5 1.20: Internet : true
2023-04-04 21:00:08.015  Status: dzVents: Debug: Livebox5 1.20: Constructed timed-command: On
2023-04-04 21:00:08.015  Status: dzVents: Info: Livebox5 1.20: IP WAN : xx.xx.xx.xx
2023-04-04 21:00:08.026  Status: dzVents: Info: Livebox5 1.20: ------ Finished t_livebox5.lua
2023-04-04 21:00:08.026  Status: dzVents: !Info: Livebox5 1.20: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:08.027  Status: dzVents: Info: moon phase v2.0: ------ Start external script: t_moon_phase.lua:, trigger: "every hours"
2023-04-04 21:00:08.028  Status: dzVents: Info: moon phase v2.0: ============== mode calcul ==================
2023-04-04 21:00:08.028  Status: dzVents: Debug: moon phase v2.0: Déclenchement timer
2023-04-04 21:00:08.028  Status: dzVents: Debug: moon phase v2.0: 12.832345000045
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: theMoon : 12.832345000045
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: moon text : Gibbeuse croissante
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: level : 40
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: switch selector name : lune
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: switch selector id : 293
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: last level switch selector : 40
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: no update needed
2023-04-04 21:00:08.029  Status: dzVents: Debug: moon phase v2.0: level switch selector : 40
2023-04-04 21:00:08.030  Status: dzVents: Debug: moon phase v2.0: level name switch selector : Gibbeuse croissante
2023-04-04 21:00:08.030  Status: dzVents: Info: moon phase v2.0: ------ Finished t_moon_phase.lua
2023-04-04 21:00:08.031  Status: dzVents: !Info: moon phase v2.0: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:08.031  Status: dzVents: Info: NOTIF-USER v2.1: ------ Start external script: t_notif_user.lua:, trigger: "every 5 minutes at 08:00-21:00"
2023-04-04 21:00:08.032  Status: dzVents: Info: NOTIF-USER v2.1: ============== NOTIF-USER ==================
2023-04-04 21:00:08.033  Status: dzVents: Debug: NOTIF-USER v2.1: Déclenchement timer
2023-04-04 21:00:08.035  Status: dzVents: Info: NOTIF-USER v2.1: ------ Finished t_notif_user.lua
2023-04-04 21:00:08.035  Status: dzVents: !Info: NOTIF-USER v2.1: Debug: Writing module summary to /opt/domoticz/userdata/scripts/dzVents/module.log
2023-04-04 21:00:08.036  Status: dzVents: Info: SINOLOGY v1.2: ------ Start external script: t_sinology.lua:, trigger: "every hour"
2023-04-04 21:00:08.041  Status: dzVents: Info: SINOLOGY v1.2: ============== SINOLOGY LOG ==================
2023-04-04 21:00:08.041  Status: dzVents: Debug: SINOLOGY v1.2: Déclenchement timer
2023-04-04 21:00:08.043  Status: dzVents: Debug: SINOLOGY v1.2: last ifHCOutOctets : 20547157 at 3600 seconds ago
2023-04-04 21:00:08.043  Status: dzVents: Debug: SINOLOGY v1.2: last ifHCInOctets : 114403457 at 3600 seconds ago
2023-04-04 21:00:10.517  Error: EventSystem: Warning!, lua script /opt/domoticz/dzVents/runtime/dzVents.lua has been running for more than 10 seconds
2023-04-04 21:00:10.642  Status: dzVents: Debug: Dumping domoticz data to /opt/domoticz/userdata/scripts/dzVents/domoticzData.lua
2023-04-04 21:00:10.802  Status: dzVents: Debug: Processing device-adapter for rpi_memory_usage: Percentage device adapter
2023-04-04 21:00:10.803  Status: dzVents: Debug: dzVents version: 3.1.8
2023-04-04 21:00:10.803  Status: dzVents: Debug: Event triggers:
2023-04-04 21:00:10.803  Status: dzVents: Debug: - Device: rpi_memory_usage
2023-04-04 21:00:13.786  Status: dzVents: Debug: SINOLOGY v1.2: NASTemp : 32
2023-04-04 21:00:13.786  Status: dzVents: Debug: SINOLOGY v1.2: HDUnit : 4096
2023-04-04 21:00:13.787  Status: dzVents: Debug: SINOLOGY v1.2: HDTotal : 239193519
2023-04-04 21:00:13.787  Status: dzVents: Debug: SINOLOGY v1.2: HDUsed : 197242901
2023-04-04 21:00:13.787  Status: dzVents: Debug: SINOLOGY v1.2: CpuUser : 2
2023-04-04 21:00:13.787  Status: dzVents: Debug: SINOLOGY v1.2: CpuSystem : 2
2023-04-04 21:00:13.787  Status: dzVents: Debug: SINOLOGY v1.2: HDTotalGo : 912.45
2023-04-04 21:00:13.788  Status: dzVents: Debug: SINOLOGY v1.2: HDFreeGo : 160.03
2023-04-04 21:00:13.788  Status: dzVents: Debug: SINOLOGY v1.2: CpuUsed : 4.0
2023-04-04 21:00:13.788  Status: dzVents: Debug: SINOLOGY v1.2: memTotalSwap: 2097084
2023-04-04 21:00:13.789  Status: dzVents: Debug: SINOLOGY v1.2: memTotalReal: 509796
l'erreur intervient à
2023-04-04 21:00:10.517 Error: EventSystem: Warning!, lua script /opt/domoticz/dzVents/runtime/dzVents.lua has been running for more than 10 seconds
J'ai le script livebox5 qui est bavard au niveau des requêtes mais je l'avais désactivé aujourd'hui et j'avais quand même l'erreur toutes les heures

il intervient dans mon script sinology

Code : Tout sélectionner

2023-04-04 21:00:08.041  Status: dzVents: Info: SINOLOGY v1.2: ============== SINOLOGY LOG ==================
2023-04-04 21:00:08.041  Status: dzVents: Debug: SINOLOGY v1.2: Déclenchement timer
2023-04-04 21:00:08.043  Status: dzVents: Debug: SINOLOGY v1.2: last ifHCOutOctets : 20547157 at 3600 seconds ago
2023-04-04 21:00:08.043  Status: dzVents: Debug: SINOLOGY v1.2: last ifHCInOctets : 114403457 at 3600 seconds ago
2023-04-04 21:00:10.517  Error: EventSystem: Warning!, lua script /opt/domoticz/dzVents/runtime/dzVents.lua has been running for more than 10 seconds
2023-04-04 21:00:10.642  Status: dzVents: Debug: Dumping domoticz data to /opt/domoticz/userdata/scripts/dzVents/domoticzData.lua
2023-04-04 21:00:10.802  Status: dzVents: Debug: Processing device-adapter for rpi_memory_usage: Percentage device adapter
2023-04-04 21:00:10.803  Status: dzVents: Debug: dzVents version: 3.1.8
2023-04-04 21:00:10.803  Status: dzVents: Debug: Event triggers:
2023-04-04 21:00:10.803  Status: dzVents: Debug: - Device: rpi_memory_usage
2023-04-04 21:00:13.786  Status: dzVents: Debug: SINOLOGY v1.2: NASTemp : 32
je vais le désactiver ou le DESCRIPTION-UNIVERSELLE car il tourne toutes les minutes et j'ai de plus en plus de devices à scanner

Re: dzvents.lua error timeout

Publié : 04 avr. 2023, 22:16
par Neutrino
C'est pas le backup automatique de domoticz qui ralentit la bécane toutes les heures ?
Il me faisait ça avant que j'optimise mes scripts en asynchrone.

dzvents.lua error timeout

Publié : 04 avr. 2023, 22:49
par pierrotori
Il est desactive

dzvents.lua error timeout

Publié : 04 avr. 2023, 23:03
par pierrotori
Ca serait le script sinology sûrement l'appel de la fonction le snmpget
Depuis que j'ai mis la montée de version de mes IOT en Mqtt je n'accède plus au NAS et il se met en veille, surement la raison de mon erreur sur des périodes de non activité de celui-ci

@neutrino , ce sont httpRespones que tu a mis en asynchrone ?

Re: dzvents.lua error timeout

Publié : 05 avr. 2023, 20:00
par Neutrino
http et shell command
ça m'a changé la vie :)
https://www.domoticz.com/wiki/DzVents:_ ... d_handling

Re: dzvents.lua error timeout

Publié : 05 avr. 2023, 23:11
par pierrotori
Oui je vais faire ça un réveil du nas via command shell et en retour exécution des commandes snmpget
Je peux faire ça car j'ai mis un schedule toutes les heures sinon je désactive la mise en veille du nas
Domoticz a du mal a paralleliser les traitements ;)
Fuseau horaire sur UTC+02:00
Page 1 sur 2

Développé par phpBB® Forum Software © phpBB Limited

Traduction française officielle © Qiaeru