Forum Domoticz en français

Code : Tout sélectionner

#!/usr/bin/env python3
# -*- coding: utf-8 -*-

domoticzserver   = 'xxx.xxx.x.x:xxxx'
domoticzusername = 'user'
domoticzpassword = 'pwd'
IDX = 'xxx'
mac_addr_LYWSD02 = 'xx:xx:xx:xx:xx:xx'

from bluepy import btle
import struct
import urllib.request
import base64

class MyDelegate(btle.DefaultDelegate):
    def handleNotification(self, cHandle, data):
        global HUM
        global TEMP
        HUM = data[2]
        TEMP = struct.unpack('h', data[:2])[0] / 100

def _encodeBase64(consumer_key, consumer_secret):
    dummy_param_name = 'bla'
    key_url_encoded = urllib.parse.urlencode({dummy_param_name: consumer_key})[len(dummy_param_name) + 1:]
    secret_url_encoded = urllib.parse.urlencode({dummy_param_name: consumer_secret})[len(dummy_param_name) + 1:]
    credentials = '{}:{}'.format(key_url_encoded, secret_url_encoded)
    bytes_base64_encoded_credentials = base64.encodebytes(credentials.encode('utf-8'))
    return bytes_base64_encoded_credentials.decode('utf-8').replace('\n', '')

def domoticzrequest (url):
  request = urllib.request.Request(url)
  request.add_header("Authorization", "Basic %s" % base64string)
  response = urllib.request.urlopen(request)
  respond = response.read()
  response.close()
  return respond

p = btle.Peripheral (mac_addr_LYWSD02)
p.setDelegate(MyDelegate())
uuid = ''
ch = p.getCharacteristics(uuid=uuid)[0]
desc = ch.getDescriptors(forUUID=0x2902)[0]
desc.write(0x01.to_bytes(2, byteorder="little"), withResponse=True)

print ("LYWSD02")

i = 0
HUM = 0
TEMP = 0

while not p.waitForNotifications(5):
     i += 1
     if i >= 20 :
       break

p.disconnect()

print(i,"T =",TEMP,"*C,   H =", HUM,"%")

base64string = _encodeBase64(domoticzusername, domoticzpassword)

HUM_STAT = "0" 
if HUM > 85:
  HUM_STAT = "3" 
elif HUM < 20:
  HUM_STAT = "2" 
elif HUM <= 60 and HUM >= 40:
  HUM_STAT = "1" 

print(domoticzrequest("http://" + domoticzserver + "/json.htm?type=command&param=udevice&idx=" + IDX + "&nvalue=0&svalue=" + str(TEMP)[:4] + ";" + str(HUM) + ";" + HUM_STAT))

Code : Tout sélectionner

/var/log/syslog