Forum Domoticz en français

Code : Tout sélectionner

-- chargement des modules
package.path = package.path..";/home/pi/domoticz/scripts/lua/?.lua"
require "modules"
commandArray = {}
if devicechanged['Denon Mode DVD'] == 'On'  then
      switchOff('Denon Mode VCR')
      switchOff('Denon Mode TV')
end
if devicechanged['Denon Mode TV'] == 'On'  then
      switchOff('Denon Mode VCR')
      switchOff('Denon Mode DVD')
end
if devicechanged['Denon Mode VCR'] == 'On'  then
      switchOff('Denon Mode DVD')
      switchOff('Denon Mode TV')
end
if devicechanged['Kodi / Zidoo to TV'] == 'On'  then
      switchOff('TV to Kodi')
      switchOff('TV to Zidoo')
      switchOn('Denon Mode TV')
end
if devicechanged['TV to Kodi'] == 'On'  then
      switchOff('TV to Zidoo')
      switchOff('Kodi / Zidoo to TV')
      switchOn('Denon Mode DVD')
end
if devicechanged['TV to Zidoo'] == 'On'  then
      switchOff('TV to Kodi')
      switchOff('Kodi / Zidoo to TV')
      switchOn('Denon Mode VCR')
end
return commandArray

Code : Tout sélectionner

commandArray[Index]={['Nom_du_Volet']='Off'}

Code : Tout sélectionner

--[[      	Script to loosen the blinds in case of heat wave 
	
	
	~/domoticz/scripts/lua/script_time_loosen_blinds.lua
	
	-- Autors  ----------------------------------------------------------------
	V1.0 - Chrominator 
	
	-- Require  --------------------------------------------------------------
	
	Devices : 	Names of all blinds to loose
	Outside temperature
	Inside temperature
	
	-- Versions -------------------------------------------------------------
	2016-08-25 : Initial version
	
]]--

-- Variables to customize ------------------------------------------------

local MinTemp = 24   				-- No action below this temperature
local BlindDelay = 5				-- Time to loose blinds
local OutsideTemp = tonumber(otherdevices_svalues['Température extérieure'])
local InsideTemp = tonumber(otherdevices_svalues['Température chambre parents'])
Index = 0
DEBUG = 0

-- Below , edit at your own risk ------------------------------------------

commandArray = {}

function LooseBlind(Blind, Delay)
	-- Prevent from opening a blind already opened previously
	if (otherdevices[Blind] == 'Closed') then
		if (DEBUG == 1) then
			print('-- Loose ' .. Blind)
		end
		Index = Index + 1
		commandArray[Index]={[Blind]='Off'}
		Index = Index + 1
		commandArray[Index]={[Blind]='Stop AFTER ' .. Delay}
	end
end

if (DEBUG == 1) then
    print('================  LOOSEN BLINDS LOG ====================')
	print("Outside temperature=" .. OutsideTemp)     
	print("Inside Temperature=" .. InsideTemp.. " Threshold " .. MinTemp)
end

if (InsideTemp > MinTemp) then
	if (OutsideTemp < InsideTemp) then
		LooseBlind('Volet bureau', BlindDelay)
		LooseBlind('Volet Chambre Parents', BlindDelay)
		LooseBlind('Volet Chambre 1', BlindDelay)
		LooseBlind('Volet Salon Est', BlindDelay)
		LooseBlind('Volet Chambre 2', BlindDelay)
		LooseBlind('Volet Cuisine', BlindDelay)
	end
end
if (DEBUG == 1) then
    print('==============  END LOOSE BLINDS LOG ==================')
end

return commandArray