Pas d'accès au serveur web
Publié : 24 déc. 2017, 13:41
Bonjour,
Je viens d'installer sur ma raspberry raspbian lite, puis domoticz en suivant ce tuto :
https://easydomoticz.com/domotique-comm ... ux-debian/
Problème, une fois terminé, je n'ai pas accès au serveur web de domoticz, en http ou https. Quand je tape 192.168.0.250:8080 j'ai instantanément le message la connexion a échouée dans mon explorateur (pourtant je suis bien connecté en ssh).
Pourtant à la fin de l'installation j'ai eu cela :
::: Installation Complete! Configure your browser to use the Domoticz using:
::: 192.168.0.250:8080
::: 192.168.0.250:443
Quand je fait :
sudo service domoticz.sh status
J'ai
● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/domoticz.sh; generated; vendor preset: enabled)
Active: active (exited) since Sun 2017-12-24 13:39:52 CET; 1min 0s ago
Docs: man:systemd-sysv-generator(8)
Process: 910 ExecStop=/etc/init.d/domoticz.sh stop (code=exited, status=0/SUCC
Process: 920 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SU
CGroup: /system.slice/domoticz.service
déc. 24 13:39:51 raspberrypi systemd[1]: Starting LSB: Home Automation System...
déc. 24 13:39:52 raspberrypi domoticz.sh[920]: /home/pi/domoticz/domoticz: error
déc. 24 13:39:52 raspberrypi systemd[1]: Started LSB: Home Automation System.
Une idée ?
Je viens d'installer sur ma raspberry raspbian lite, puis domoticz en suivant ce tuto :
https://easydomoticz.com/domotique-comm ... ux-debian/
Problème, une fois terminé, je n'ai pas accès au serveur web de domoticz, en http ou https. Quand je tape 192.168.0.250:8080 j'ai instantanément le message la connexion a échouée dans mon explorateur (pourtant je suis bien connecté en ssh).
Pourtant à la fin de l'installation j'ai eu cela :
::: Installation Complete! Configure your browser to use the Domoticz using:
::: 192.168.0.250:8080
::: 192.168.0.250:443
Quand je fait :
sudo service domoticz.sh status
J'ai
● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/domoticz.sh; generated; vendor preset: enabled)
Active: active (exited) since Sun 2017-12-24 13:39:52 CET; 1min 0s ago
Docs: man:systemd-sysv-generator(8)
Process: 910 ExecStop=/etc/init.d/domoticz.sh stop (code=exited, status=0/SUCC
Process: 920 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SU
CGroup: /system.slice/domoticz.service
déc. 24 13:39:51 raspberrypi systemd[1]: Starting LSB: Home Automation System...
déc. 24 13:39:52 raspberrypi domoticz.sh[920]: /home/pi/domoticz/domoticz: error
déc. 24 13:39:52 raspberrypi systemd[1]: Started LSB: Home Automation System.
Une idée ?