problème suite à la programmation d'un sonnof
Publié : 11 mars 2018, 17:24
bonsoir
voulant intégrer des relais th16 de chez sonnof je viens de flasher l'un d'entre eux pour installer espeasy version R140
Etant sous linux j'utilise l'interface Arduino pour programmer, ce qui ne m'a jamais posé de problème
Mon processus se programmation semble se dérouler correctement (cf code ci dessous) mais lorsque je relance mon esp8266 il n'est pas visible dans les réseaux disponibles
Auriez vous une explication ?
Par avance merci
voulant intégrer des relais th16 de chez sonnof je viens de flasher l'un d'entre eux pour installer espeasy version R140
Etant sous linux j'utilise l'interface Arduino pour programmer, ce qui ne m'a jamais posé de problème
Mon processus se programmation semble se dérouler correctement (cf code ci dessous) mais lorsque je relance mon esp8266 il n'est pas visible dans les réseaux disponibles
Auriez vous une explication ?
Par avance merci
Code : Tout sélectionner
Les variables globales utilisent 49472 octets (60%) de mémoire dynamique, ce qui laisse 32448 octets pour les variables locales. Le maximum est de 81920 octets.
/home/michel/.arduino15/packages/esp8266/tools/esptool/0.4.8/esptool -vv -cd ck -cb 115200 -cp /dev/ttyUSB0 -ca 0x00000 -cf /tmp/arduino_build_552559/ESPEasy.ino.bin
esptool v0.4.8 - (c) 2014 Ch. Klippel <ck@atelier-klippel.de>
setting board to ck
setting baudrate from 115200 to 115200
setting port from /dev/ttyUSB0 to /dev/ttyUSB0
setting address from 0x00000000 to 0x00000000
espcomm_upload_file
espcomm_upload_mem
opening port /dev/ttyUSB0 at 115200
tcgetattr
tcsetattr
serial open
opening bootloader
resetting board
trying to connect
setting character timeout 0
done
setting character timeout 1
done
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
trying to connect
setting character timeout 0
done
setting character timeout 1
done
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
espcomm_send_command: receiving 2 bytes of data
Uploading 429600 bytes from to flash at 0x00000000
erasing flash
size: 068e20 address: 000000
first_sector_index: 0
total_sector_count: 105
head_sector_count: 16
adjusted_sector_count: 89
erase_size: 059000
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
setting timeout 15000
setting character timeout 150
done
setting timeout 1
setting character timeout 1
done
espcomm_send_command: receiving 2 bytes of data
writing flash
....................................................................................................................................................................................................................................................................................................................................................................................................................................
starting app without reboot
espcomm_send_command: sending command header
espcomm_send_command: sending command payload
espcomm_send_command: receiving 2 bytes of data
closing bootloader