Forum Domoticz en français

Code : Tout sélectionner

commandArray = {}

function split(source, delimiters)
        local elements = {}
        local pattern = '([^'..delimiters..']+)'
        string.gsub(source, pattern, function(value) elements[#elements + 1] =     value;  end);
        return elements
end

--recupere les minutes
time=os.time()
minutes=tonumber(os.date('%M',time))
hours=tonumber(os.date('%H',time))

-- pluie du jour
pluiedujour = otherdevices_svalues['Pluie'];
local result = split(pluiedujour, ';') ;
pluiedujour = tonumber(result[2]);



if( (hours==22) and pluiedujour < 0.2 and tonumber(otherdevices_svalues['Proba pluie 1h']) < 60 ) then
        -- Arrosage 1
        if ( uservariables["nombreArrosage"]  > 0 and minutes == 00) then
    print('------- Arrosage numero 1 DEBUT');
        commandArray['Arrosage'] = 'On'; -- on normalement
        end
        -- Arrosage 2
        if ( uservariables["nombreArrosage"] > 1 and minutes == 20) then
    print('------- Arrosage numero 2 DEBUT');
        commandArray['Arrosage'] = 'On'; -- on normalement
        end
        -- Arrosage 3
        if ( uservariables["nombreArrosage"] > 2 and minutes == 40) then
    print('------- Arrosage numero 3 DEBUT');
        commandArray['Arrosage'] = 'On'; -- on normalement
        end
        -- Arrosage 4
        if ( uservariables["nombreArrosage"] > 3 and minutes == 58) then
    print('------- Arrosage numero 4 DEBUT');
        commandArray['Arrosage'] = 'On'; -- on normalement
        end

end

Code : Tout sélectionner

#!/bin/bash
# Settings

# Variables pour Forecast.io
API="29f3a69701e1907dfc95b357527fedc5"
LAT="43.5004"
LON="3.7093"
#Variables pour Domoticz
DOMO_IP="192.168.1.7"           # Domoticz IP Address
DOMO_PORT="8084"                # Domoticz Port
ARROSAGE_SCENE_IDX="6"         # IDX Groupe arrosage auto
ARROSAGE_STATUS=""         # IDX Groupe arrosage auto
RAINLIMIT="0.2" #Seuil de declemchement de l arrosage pour pluie a tomber
HYGROLIMIT="30" #Seuil de declemchement de l arrosage pour hygrometrie
HYGRO_IDX="171" #IDX sonde pour hygrometrie
ACTION=$1
#
# Test du parametre action (On/Off)
if [ -z ${ACTION} ] ;
then
  echo "Manque 1er parametre On/Off"
  exit 0
elif [ ${ACTION} !=  "On" -a  ${ACTION} != "Off" ] ;
then
  echo "Le 1er parametre doit etre egal a On ou Off"
  exit 0
fi

#On teste si l'arrosage est en route, sinon pas besoin de l'arreter en cas de Off
if [ ${ACTION} = "Off" ] ;
then
   ARROSAGE_STATUS=$(curl -s -i -H "Accept: application/json" "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=scenes" | egrep -w -m1 -A6 "Arrosage" |grep "Status" | cut -d'"' -f4)
#  echo "ARROSAGE_STATUS:${ARROSAGE_STATUS}"
  if [ ${ARROSAGE_STATUS} = "Off" ] ;
  then
  echo "Pas besoin d'arreter l'arrosage, il est deja arrete ! "
  MESSAGE="Pas%20besoin%20d%20arreter%20l%20arrosage,il%20est%20deja%20arrete%20!"
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=${MESSAGE}"
  exit 0
  fi
fi

#On recupere la valeur RAINVAL correspondant a la moyenne de precipitation sous 24H
RAINVAL=$(curl -s -i -H "Accept: application/json" "https://api.forecast.io/forecast/$API/$LAT,$LON?units=ca&exclude=currently,minutely,hourly,alerts,flags" | grep precipIntensity| cut -d, -f14 |cut -d: -f2 | cut -c 1-3)
echo "RAINVAL : ${RAINVAL}"

#On traite le cas de l activation de l arrosage (action=On)
if [ ${ACTION} = "On" ] ;
then
  if [ $(expr ${RAINVAL} '<' ${RAINLIMIT}) = 1 ] ; then
    echo "Il ne va pas pleuvoir, on teste l hygro de la sonde !"
      curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=il%20ne%20va%20pas%20pleuvoir,%20test%20sonde%20hygro"
    #On teste la valeur hygro de la sonde du fraisier
    HYGROSONDE1=$(curl -s -i -H "Accept: application/json" "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=devices&rid=${HYGRO_IDX}" |grep "Humidity\" :" | cut -d':' -f2 | cut -d',' -f1 |cut -d " " -f2)
    echo "HYGROSONDE1 : (${HYGROSONDE1})"
    if [ $(expr ${HYGROSONDE1} '<' ${HYGROLIMIT}) = 1 ] ; then
      MESSAGE="=Il%20ne%20va%20pas%20pleuvoir%20et%20hygro%20faible%20(${RAINVAL}),%20on%20lance%20l%20arrosage%20"
      curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=${MESSAGE}"
      curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=switchscene&idx=${ARROSAGE_SCENE_IDX}&switchcmd=On"
    else
       MESSAGE="Hygro%20OK%20(${HYGROSONDE1}),pas%20besoin%20d%20arrosage"
       curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=${MESSAGE}"
    fi
  else
    MESSAGE="Il%20Ova20pleuvoir,pas%20besoin%20d%20arroser"
    echo "Il va pleuvoir, pas besoin d arroser"
    curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=${MESSAGE}"
  fi
else
# On traite le cas d arret de l arrosage
  echo "Arret de l arrosage auto !"
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=switchscene&idx=${ARROSAGE_SCENE_IDX}&switchcmd=Off"
  curl "http://${DOMO_IP}:${DOMO_PORT}/json.htm?type=command&param=addlogmessage&message=Arret%20de%20l%20arrosage%20auto%20!"
fi

Code : Tout sélectionner

0 22 * 4-9 2,4,6 /dev-domoticz/scripts/shell/arrosage.sh on > /dev/null
30 22 * 4-9 2,4,6 /dev-domoticz/scripts/shell/arrosage.sh off > /dev/null