Forum Domoticz en français

Code : Tout sélectionner

#include <ESP8266WiFi.h>
#include "Adafruit_MQTT.h"
#include "Adafruit_MQTT_Client.h"
 
#define prelay1 D1
#define prelay2 D2

 
#define WLAN_SSID       "SSID"
#define WLAN_PASS       "PASSWORD!"
#define relay D1
 
#define AIO_SERVER      "io.adafruit.com"
#define AIO_SERVERPORT  1883                   // use 8883 for SSL
#define AIO_USERNAME  "USERNAME"
#define AIO_KEY       "KEY"


WiFiClient client;
 
Adafruit_MQTT_Client mqtt(&client, AIO_SERVER, AIO_SERVERPORT, AIO_USERNAME, AIO_KEY);
 
Adafruit_MQTT_Subscribe relay1 = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME "/feeds/Lumière salon");
 
Adafruit_MQTT_Subscribe relay2 = Adafruit_MQTT_Subscribe(&mqtt, AIO_USERNAME "/feeds/lumiere2");
 
 
 
 
void MQTT_connect();
 
void setup() {
  Serial.begin(115200);
  delay(10);
  pinMode(prelay1,OUTPUT);
  pinMode(prelay2,OUTPUT);
  digitalWrite(prelay1,HIGH);

  Serial.println(F("Adafruit MQTT demo"));
  Serial.println(); Serial.println();
  Serial.print("Connecting to ");
  Serial.println(WLAN_SSID);
   
  WiFi.begin(WLAN_SSID, WLAN_PASS);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println();
 
  Serial.println("WiFi connected");
  Serial.println("IP address: "); Serial.println(WiFi.localIP());
  mqtt.subscribe(&relay1);
   mqtt.subscribe(&relay2);
 
 
}
uint32_t x=0;
void loop() {

 









  
  MQTT_connect();
 
  Adafruit_MQTT_Subscribe *subscription;
  while ((subscription = mqtt.readSubscription(5000))) {
   
    if (subscription == &relay1) {
      Serial.print(F("Got: "));
      Serial.println((char *)relay1.lastread);
      uint16_t state1 = atoi((char *)relay1.lastread);
      if(state1 == 1){
     digitalWrite(prelay1,LOW);


      }else{
        digitalWrite(prelay1,HIGH);
           
      }
     
    }
 
   
    if (subscription == &relay2) {
      Serial.print(F("Got: "));
      Serial.println((char *)relay2.lastread);
      uint16_t state2 = atoi((char *)relay2.lastread);
     
      if(state2 == 1){
     digitalWrite(prelay2,LOW);
      }else{
        digitalWrite(prelay2,HIGH);
      }
     
    }
  }
 
}
void MQTT_connect() {
  int8_t ret;
if (mqtt.connected()) {
    return;
  }
 
  Serial.print("Connecting to MQTT... ");
 
  uint8_t retries = 3;
  while ((ret = mqtt.connect()) != 0) {
       Serial.println(mqtt.connectErrorString(ret));
       Serial.println("Retrying MQTT connection in 5 seconds...");
       mqtt.disconnect();
       delay(5000);
       retries--;
       if (retries == 0) {
         while (1);
         
       }
  }
  Serial.println("MQTT Connected!");
}