Forum Domoticz en français

salut à tous,
j'ai donc tout reinstallé suite à mon crash, je suis sous raspbian buster sur pi3 b+

je rencontre un soucis avec mes mi flora,
j'ai donc installer à partir d'ici
https://www.domoticz.com/wiki/Mi_Flora_Bluetooth_LE

dans putty quand je lance

Code : Tout sélectionner

/usr/bin/python3 /home/pi/domoticz/scripts/python/miflora/domoticz.py

j'ai comme retour

Code : Tout sélectionner

/home/pi/domoticz/scripts/python/miflora/domoticz.py:25: DeprecationWarning: encodestring() is a deprecated alias since 3.1, use encodebytes()
  base64string = base64.encodestring(('%s:%s' % (domoticzusername, domoticzpassword)).encode()).decode().replace('\n', '')

à savoir que j'ai bien le retour de mes miflora, enfin d'un, le 2eme ne veut pas, mais je ne sais pas si c'est lié.....
en tout cas les info remonte bien dans DZ

voilà le script

Code : Tout sélectionner

import urllib.request
import base64
import time
from miflora.miflora_poller import MiFloraPoller, \
    MI_CONDUCTIVITY, MI_MOISTURE, MI_LIGHT, MI_TEMPERATURE, MI_BATTERY

# Settings for the domoticz server

# Forum see: http://domoticz.com/forum/viewtopic.php?f=56&t=13306&hilit=mi+flora&start=20#p105255

domoticzserver   = "127.0.0.1:8080"
domoticzusername = ""
domoticzpassword = ""

# So id devices use: sudo hcitool lescan

# Sensor IDs

# Create 4 virtual sensors in dummy hardware
# type temperature
# type lux
# type percentage (moisture)
# type custom (fertility)

base64string = base64.encodestring(('%s:%s' % (domoticzusername, domoticzpassword)).encode()).decode().replace('\n', '')

def domoticzrequest (url):
  request = urllib.request.Request(url)
  request.add_header("Authorization", "Basic %s" % base64string)
  response = urllib.request.urlopen(request)
  return response.read()

def update(address,idx_moist,idx_temp,idx_lux,idx_cond):

    poller = MiFloraPoller(address)

    # reading error in poller (happens sometime, you go and bug the original author):
    #
    # 26231 fertility
    # 136% moisture
    # 4804.2 temperature
    # 61149 lux
    
    loop = 0
    try:
        temp = poller.parameter_value("temperature")
    except:
        temp = 201
    
    while loop < 2 and temp > 200:
        print("Patched: Error reading value retry after 5 seconds...\n")
        time.sleep(5)
        poller = MiFloraPoller(address)
        loop += 1
        try:
            temp = poller.parameter_value("temperature")
        except:
            temp = 201
    
    if temp > 200:
        print("Patched: Error reading value\n")
        return
    
    global domoticzserver

    print("Mi Flora: " + address)
    print("Firmware: {}".format(poller.firmware_version()))
    print("Name: {}".format(poller.name()))
    print("Temperature: {}Â°C".format(poller.parameter_value("temperature")))
    print("Moisture: {}%".format(poller.parameter_value(MI_MOISTURE)))
    print("Light: {} lux".format(poller.parameter_value(MI_LIGHT)))
    print("Fertility: {} uS/cm?".format(poller.parameter_value(MI_CONDUCTIVITY)))
    print("Battery: {}%".format(poller.parameter_value(MI_BATTERY)))

    val_bat  = "{}".format(poller.parameter_value(MI_BATTERY))
    
    # Update temp
    val_temp = "{}".format(poller.parameter_value("temperature"))
    domoticzrequest("http://" + domoticzserver + "/json.htm?type=command&param=udevice&idx=" + idx_temp + "&nvalue=0&svalue=" + val_temp + "&battery=" + val_bat)

    # Update lux
    val_lux = "{}".format(poller.parameter_value(MI_LIGHT))
    domoticzrequest("http://" + domoticzserver + "/json.htm?type=command&param=udevice&idx=" + idx_lux + "&svalue=" + val_lux + "&battery=" + val_bat)

    # Update moisture
    val_moist = "{}".format(poller.parameter_value(MI_MOISTURE))
    domoticzrequest("http://" + domoticzserver + "/json.htm?type=command&param=udevice&idx=" + idx_moist + "&svalue=" + val_moist + "&battery=" + val_bat)

    # Update fertility
    val_cond = "{}".format(poller.parameter_value(MI_CONDUCTIVITY))
    domoticzrequest("http://" + domoticzserver + "/json.htm?type=command&param=udevice&idx=" + idx_cond + "&svalue=" + val_cond + "&battery=" + val_bat)
    time.sleep(1)

# format address, moist (%), temp (Â°C), lux, fertility

print("\n1:plante salon")
update("C4:7C:8D:65:E5:8D","5386","530","140","5384")

print("\n2: plante etage")
update("C4:7C:8D:65:D2:6F","5387","532","52","5385")

Forum Domoticz en français

probleme python 3

probleme python 3