Forum Domoticz en français

bonjour,

je suis sur raspberry 1, et j'ai tout réinstaller:
domoticz 2020.1 (openzwave 1.6)
debian buster
python 3.7
clé ZWAVE AEOTEC GEN 5 USB

1) j'ai ma page openzwave control panel vide, en fait je n'ai que les "statistiques" dans la page network, et dans controller, functions ou devices je n'ai rien qui s'affiche
j'ai regardé pas mal de forum et il semblerait qu'il y avait une erreur dans le fichier cp.js mais j'ai la version corrigée.
2) ensuite je ne sais pas si c'est des erreurs mais dans le log domoticz au démarage, des erreurs ou warnings s'affichent et je ne les comprends pas bien, surtout pour un noeud 0x14 "mini clavier zipato".
Je met mon log par block, merci de m'expliquer brièvement la signification et si c'est important pour la suite du traitement dans domoticz.

D'avance merci beaucoup

ça démarre bien
2020-03-31 23:24:15.354 Status: Domoticz V2020.1 (c)2012-2020 GizMoCuz
2020-03-31 23:24:15.358 Status: Build Hash: 63fa969e4, Date: 2020-03-22 15:16:16
2020-03-31 23:24:15.359 Status: Startup Path: /home/pi/domoticz/
2020-03-31 23:24:16.190 Status: PluginSystem: Started, Python version '3.7.3'.
2020-03-31 23:24:16.259 Status: WebServer(HTTP) started on address: :: with port 8080
2020-03-31 23:24:16.300 Status: WebServer(SSL) started on address: :: with port 443
2020-03-31 23:24:16.323 Status: TCPServer: shared server started...
2020-03-31 23:24:16.324 Status: RxQueue: queue worker started...
2020-03-31 23:24:18.327 Status: NotificationSystem: thread started...
2020-03-31 23:24:18.328 Status: Netatmo: Worker started...
2020-03-31 23:24:18.332 Status: EventSystem: reset all events...

2020-03-31 23:24:18.352 Status: EventSystem: reset all device statuses...
2020-03-31 23:24:18.819 Status: PluginSystem: Entering work loop.
2020-03-31 23:24:18.828 Status: OpenZWave: using config in: /home/pi/domoticz/Config/
2020-03-31 23:24:19.185 Status: Python EventSystem: Initalizing event module.
2020-03-31 23:24:19.196 Status: OpenZWave: Starting...
2020-03-31 23:24:19.196 Status: OpenZWave: Version: 1.6-1033-g3661f170
2020-03-31 23:24:19.198 Status: EventSystem: Started
2020-03-31 23:24:19.199 Status: EventSystem: Queue thread started...
2020-03-31 23:24:28.996 Status: OpenZWave: User Alert - Manufacturer_specific.xml out of Date
2020-03-31 23:24:28.997 Status: OpenZWave: ManufacturerSpecificDB Ready
2020-03-31 23:24:29.543 Status: Netatmo: No Weather Station devices found...
2020-03-31 23:24:30.608 Status: OpenZWave: Driver Ready

PB sur 3 détecteurs de fumées
2020-03-31 23:24:30.765 Status: SendSwitchIfNotExists: Device '5.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00000500' matches '5.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:30.792 Status: SendSwitchIfNotExists: Device '5.instance.1.index.4.commandClasses.156' (Heat) with DeviceID '0000052C' matches '5.instance.1.index.4.commandClasses.113' (Heat). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:30.868 Status: SendSwitchIfNotExists: Device '8.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00000800' matches '8.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:30.901 Status: SendSwitchIfNotExists: Device '8.instance.1.index.4.commandClasses.156' (Heat) with DeviceID '0000082C' matches '8.instance.1.index.4.commandClasses.113' (Heat). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:30.940 Status: SendSwitchIfNotExists: Device '9.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00000900' matches '9.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:30.963 Status: SendSwitchIfNotExists: Device '9.instance.1.index.4.commandClasses.156' (Heat) with DeviceID '0000092C' matches '9.instance.1.index.4.commandClasses.113' (Heat). Domoticz will use the Dimmer (and hide the Switch).

PB sur Mini clavier Zipato
2020-03-31 23:24:31.231 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 241:, Instance: 1, Index: 241
2020-03-31 23:24:31.231 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 242:, Instance: 1, Index: 242
2020-03-31 23:24:31.232 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 243:, Instance: 1, Index: 243
2020-03-31 23:24:31.232 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 244:, Instance: 1, Index: 244
2020-03-31 23:24:31.233 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 245:, Instance: 1, Index: 245
2020-03-31 23:24:31.233 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 246:, Instance: 1, Index: 246
2020-03-31 23:24:31.233 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 247:, Instance: 1, Index: 247
2020-03-31 23:24:31.234 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 248:, Instance: 1, Index: 248
2020-03-31 23:24:31.234 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 249:, Instance: 1, Index: 249
2020-03-31 23:24:31.235 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 250:, Instance: 1, Index: 250
2020-03-31 23:24:31.235 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 251:, Instance: 1, Index: 251
2020-03-31 23:24:31.236 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 252:, Instance: 1, Index: 252
2020-03-31 23:24:31.236 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 253:, Instance: 1, Index: 253
2020-03-31 23:24:31.236 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Code 254:, Instance: 1, Index: 254
2020-03-31 23:24:31.238 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Raw UserCode, Instance: 1, Index: 258
2020-03-31 23:24:31.248 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: USER CODE, Label: Raw UserCode Index, Instance: 1, Index: 259
2020-03-31 23:24:31.250 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Time Limit, Instance: 1, Index: 1
2020-03-31 23:24:31.252 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Access Control, Instance: 1, Index: 6
2020-03-31 23:24:31.253 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Home Security, Instance: 1, Index: 7
2020-03-31 23:24:31.255 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Previous Event Cleared, Instance: 1, Index: 256
2020-03-31 23:24:31.256 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Alert Location, Instance: 1, Index: 257
2020-03-31 23:24:31.257 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: User Code, Instance: 1, Index: 260
2020-03-31 23:24:31.268 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: User Code, Instance: 1, Index: 261
2020-03-31 23:24:31.269 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Progress, Instance: 1, Index: 262
2020-03-31 23:24:31.270 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Mode, Instance: 1, Index: 263
2020-03-31 23:24:31.272 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Obstruction, Instance: 1, Index: 264
2020-03-31 23:24:31.273 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: ALARM, Label: Sensor ID, Instance: 1, Index: 265
2020-03-31 23:24:31.276 OpenZWave: Value_Added: Node: 20 (0x14), CommandClass: BATTERY, Label: Battery Level, Instance: 1, Index: 0

PB sur des ouvertures de porte de marque chinoise
2020-03-31 23:24:31.291 OpenZWave: Value_Added: Node: 22 (0x16), CommandClass: SENSOR BINARY, Label: Sensor, Instance: 1, Index: 0
2020-03-31 23:24:31.294 OpenZWave: Value_Added: Node: 22 (0x16), CommandClass: ALARM, Label: Access Control, Instance: 1, Index: 6
2020-03-31 23:24:31.296 OpenZWave: Value_Added: Node: 22 (0x16), CommandClass: ALARM, Label: Previous Event Cleared, Instance: 1, Index: 256
2020-03-31 23:24:31.311 OpenZWave: Value_Added: Node: 22 (0x16), CommandClass: BATTERY, Label: Battery Level, Instance: 1, Index: 0
2020-03-31 23:24:31.316 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: SENSOR BINARY, Label: Sensor, Instance: 1, Index: 0
2020-03-31 23:24:31.339 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: ALARM, Label: Access Control, Instance: 1, Index: 6
2020-03-31 23:24:31.341 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: ALARM, Label: Previous Event Cleared, Instance: 1, Index: 256
2020-03-31 23:24:31.346 OpenZWave: Value_Added: Node: 23 (0x17), CommandClass: BATTERY, Label: Battery Level, Instance: 1, Index: 0

PB sur une SIRENE
2020-03-31 23:24:31.352 OpenZWave: Value_Added: Node: 24 (0x18), CommandClass: SWITCH BINARY, Label: Switch, Instance: 1, Index: 0
2020-03-31 23:24:31.354 OpenZWave: Value_Added: Node: 24 (0x18), CommandClass: SCENE ACTIVATION, Label: Scene, Instance: 1, Index: 0
2020-03-31 23:24:31.354 OpenZWave: Value_Added: Node: 24 (0x18), CommandClass: SCENE ACTIVATION, Label: Duration, Instance: 1, Index: 1

PB sur contrôleur de scene HANK
2020-03-31 23:24:31.374 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: SWITCH MULTILEVEL, Label: Level, Instance: 1, Index: 0
2020-03-31 23:24:31.377 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: SWITCH MULTILEVEL, Label: Bright, Instance: 1, Index: 1
2020-03-31 23:24:31.377 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: SWITCH MULTILEVEL, Label: Dim, Instance: 1, Index: 2
2020-03-31 23:24:31.387 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: CENTRAL SCENE, Label: Scene 1, Instance: 1, Index: 1
2020-03-31 23:24:31.388 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: CENTRAL SCENE, Label: Scene 2, Instance: 1, Index: 2
2020-03-31 23:24:31.390 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: CENTRAL SCENE, Label: Scene 3, Instance: 1, Index: 3
2020-03-31 23:24:31.390 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: CENTRAL SCENE, Label: Scene 4, Instance: 1, Index: 4
2020-03-31 23:24:31.390 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: CENTRAL SCENE, Label: Scene Count, Instance: 1, Index: 256
2020-03-31 23:24:31.401 OpenZWave: Value_Added: Node: 28 (0x1c), CommandClass: BATTERY, Label: Battery Level, Instance: 1, Index: 0

PB sur Mini clavier Zipato et les 2 ouvertures de porte de marque chinoise
2020-03-31 23:24:31.251 Status: SendSwitchIfNotExists: Device '20.instance.1.index.1.commandClasses.113' (Time Limit) with DeviceID '00001401' matches '20.instance.1.index.0.commandClasses.37' (Switch). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:31.297 Status: SendSwitchIfNotExists: Device '22.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00001600' matches '22.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).
2020-03-31 23:24:31.343 Status: SendSwitchIfNotExists: Device '23.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00001700' matches '23.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).

PB : Des noeuds "unknown" (qui n'existe plus) que je ne sais pas enlevé d"openzwave" de ma clé ZWAVE AEOTEC
2020-03-31 23:24:31.404 Status: OpenZWave: New Node added. HomeID: 3769383457, NodeID: 11 (0x0b)
2020-03-31 23:24:31.406 Status: OpenZWave: New Node added. HomeID: 3769383457, NodeID: 13 (0x0d)
2020-03-31 23:24:31.418 Status: OpenZWave: New Node added. HomeID: 3769383457, NodeID: 15 (0x0f)

PB je pense car j'ai 2 détecteur d'ouverture qui n'ont plus de pile
2020-03-31 23:24:31.429 Status: OpenZWave: New Node added. HomeID: 3769383457, NodeID: 26 (0x1a)
2020-03-31 23:24:31.431 Status: OpenZWave: New Node added. HomeID: 3769383457, NodeID: 27 (0x1b

Bonjour,

J’ai le même problème depuis la mise à jour 2020.1

J’ai essayé de les supprimer pour les réinclure ensuite mais même problème (module Qubino fil pilote). Ce qui est bizarre c’est que sur 5 modules, un n’affiche pas de problème mais les 4 autres donnent ces erreurs à chaque redémarrage de domoticz :

2020-04-01 12:56:21.530 Error: ZWave: Node not found! (NodeID: 6, 0x06)
2020-04-01 12:56:21.650 Error: ZWave: Node not found! (NodeID: 12, 0x0c)
2020-04-01 12:56:21.771 Error: ZWave: Node not found! (NodeID: 8, 0x08)
2020-04-01 12:56:21.771 Error: ZWave: Node not found! (NodeID: 13, 0x0d)

(Pi3 sous Buster mis à jour il y a 3 jours)

Bonsoir
Meme problème
Debian 10 sur RPI2
domoticz Version: 2020.1
Status: OpenZWave: User Alert - Manufacturer_specific.xml out of Date

Lors de ma migration avec l'insertion de la clé zwave j'avais cette erreur
Status: SendSwitchIfNotExists: Device '22.instance.1.index.256.commandClasses.113' (Previous Event Cleared) with DeviceID '00001600' matches '22.instance.1.index.0.commandClasses.48' (Sensor). Domoticz will use the Dimmer (and hide the Switch).

j'ai fait une
reinitilaisation logiciel du controleur
reinitilaisation materiel du controleur (en sachant que j'allais être obligé de refaire une inclusion)
il a fallu que je fasse une suppression des devices en erreur pour ne plus avoir le message SendSwitchIfNotExists

reste le problème de l'out of date, j'ai essayé la version 84
https://github.com/OpenZWave/open-zwave ... ecific.xml
mais j'ai cette erreur dans domoticz
OpenZWave: A Config File Failed to download
et pas d'erreur dans la log OZW_Log.txt
2020-04-09 22:45:41.466 Always, OpenZwave Version 1.6-1033-g3661f170 Starting Up
2020-04-09 22:45:41.466 Always, Using Language Localization

pour l'instant je cherche la solution avant de refaire toute les inclusions de mes devices

bonne soirée