Moes

Thorgal · Message par **Thorgal** » 24 déc. 2021, 14:39

Ben je viens de regarder leur code, c'est exactement les memes commandes.
La temperature passe aussi de 23 a 20 ?

samourai47 · Message par **samourai47** » 27 déc. 2021, 16:59

Je dirai non pas de soucis j'ai toujouurs pas modifie les reglages de periode.
Ca fonctionne avec mqtt
Il a y un probleme de floodin

Code : Tout sélectionner

Stop message flooding

This unit has a bug that makes it send multiple messages when updating. To stop this from flooding your MQTT Queues, please add the following to your configuration.yaml file:

devices: '0x12345678': friendly_name: thermostat debounce: 1

Que l'on peut resoudre en rajoutant une commande

Mais l'integration de mon detecteur de fumee ne se fait pas bien avec mqtt....
Bref coincé avec deconz ou mqtt... Galère

samourai47 · Message par **samourai47** » 30 déc. 2021, 18:29

hello
Pas d'idee du coup pour le thermostat?

Thorgal · Message par **Thorgal** » 31 déc. 2021, 16:13

Ben si tu es encore sous deconz, vu que sur zigbee2mqtt la valeur de "heatsetpoint" ne change pas je me dit que le soucis doit venir de la.

Faudrait tester en remettant 20°C avant de refaire la requete, mais d'apres les logs, il y a un truc que je ne comprend pas

2021-12-21 19:04:08.223 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2000, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2021-12-21 19:04:08.224 Deconz Plugins: (Deconz Plugins) ### Update device (Reglage) : {'nValue': 0, 'sValue': '20.0'}, IGNORED , no changes !
2021-12-21 19:04:08.225 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2021-12-21 19:04:08.225 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2021-12-21 19:04:08.248 Deconz Plugins: (Deconz Plugins) ### Update device (T° Salon) : {'nValue': 0, 'sValue': '20.0'}, IGNORED , no changes !
2021-12-21 19:04:08.128 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2021-12-21 19:04:10.402 Deconz Plugins: (Deconz Plugins) onMessage called
2021-12-21 19:04:10.404 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'attr': {'id': '11', 'lastannounced': '2021-12-20T18:06:58Z', 'lastseen': '2021-12-21T18:04Z', 'manufacturername': '_TZE200_aoclfnxz', 'modelid': 'TS0601', 'name': 'Thermostat 11', 'productid': 'Tuya_THD BTH-002 Thermostat', 'swversion': None, 'type': 'ZHAThermostat', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2021-12-21 19:04:10.855 Deconz Plugins: (Deconz Plugins) onMessage called
2021-12-21 19:04:10.855 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}

Qu'est ce qui fait passer la valeur a 23 °C ?

samourai47 · Message par **samourai47** » 31 déc. 2021, 16:30

Ok je reprends les test ce weekend.....
Sous mqtt y a juste un soucis de flooding mais tout le reste fonctionne je parle du thermostat..
Je ferai des test avec la température a 20 demandée et a 23
Merci et bon réveillon

samourai47 · Message par **samourai47** » 02 janv. 2022, 17:08

J'ai redemarre la machine après avoir mis a jour la cle avec le firmware du 19 aout 2021??? On sait jamais.. LOl
Aucun message d'erreurs lors des test par contre

Marche arret marche bien au debut , le thermostat est sur 20. J'ai mis ensuite le thermostat sur 23 mais pendant les periodes de chauffe pregrogramme et la j'ai perdu les commandes du moins en partie

Code : Tout sélectionner

 2022-01-02 16:47:25.081 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:47:35.052 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:47:42.616 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 13: Parameter 'Set Level', Level: 20.5, Hue:
2022-01-02 16:47:42.617 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'heatsetpoint': 2050} (0 in buffer)
2022-01-02 16:47:42.617 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'heatsetpoint': 2050}
2022-01-02 16:47:42.639 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/heatsetpoint":2050}}]
2022-01-02 16:47:42.639 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/heatsetpoint': 2050}}]
2022-01-02 16:47:42.690 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:47:42.691 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2050, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:47:42.691 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}
2022-01-02 16:47:42.707 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:47:42.707 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:47:42.727 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '18.5'}, IGNORED , no changes !
2022-01-02 16:47:42.727 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:47:42.727 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2000, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:47:42.728 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.0'}
2022-01-02 16:47:42.744 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:47:42.744 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:47:42.761 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '18.5'}, IGNORED , no changes !
2022-01-02 16:47:42.761 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:47:42.762 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T15:47:42.674', 'on': False, 'temperature': 1850}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:47:42.763 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '18.5'}, IGNORED , no changes !
2022-01-02 16:47:45.068 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:47:46.871 Deconz Plugins: (Deconz Plugins) onMessage called 



 2022-01-02 16:50:09.974 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (23/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 16:50:10.011 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/mode":"off"}}]
2022-01-02 16:50:10.012 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/mode': 'off'}}]
2022-01-02 16:50:10.065 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:50:10.066 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2000, 'locked': False, 'mode': 'off', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:50:10.067 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.0'}, IGNORED , no changes !
2022-01-02 16:50:10.067 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '0'}
2022-01-02 16:50:10.092 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:50:10.112 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.0'}, IGNORED , no changes !
2022-01-02 16:50:15.074 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:50:19.282 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 14: Parameter 'Set Level', Level: 10, Hue:
2022-01-02 16:50:19.282 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'mode': 'heat'} (0 in buffer)
2022-01-02 16:50:19.282 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'mode': 'heat'}
2022-01-02 16:50:19.305 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/mode":"heat"}}]
2022-01-02 16:50:19.306 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/mode': 'heat'}}]
2022-01-02 16:50:19.356 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:50:19.357 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2000, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:50:19.358 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.0'}, IGNORED , no changes !
2022-01-02 16:50:19.359 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}
2022-01-02 16:50:19.383 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:50:19.400 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.0'}, IGNORED , no changes ! 


 2022-01-02 16:51:09.488 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:51:09.489 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:51:09.490 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}
2022-01-02 16:51:09.525 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:51:09.525 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:51:09.544 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.0'}, IGNORED , no changes !
2022-01-02 16:51:09.544 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:51:09.544 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T15:51:09.464', 'on': False, 'temperature': 1900}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:51:09.545 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.0'}, IGNORED , no changes !
2022-01-02 16:51:15.056 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:51:16.610 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:51:16.610 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '6', 'r': 'sensors', 'state': {'fire': False, 'lastupdated': '2022-01-02T15:51:16.585', 'lowbattery': False, 'test': False}, 't': 'event', 'uniqueid': '00:15:bc:00:31:00:c8:92-23-0500'}
2022-01-02 16:51:16.611 Deconz Plugins: (Deconz Plugins) ### Update device (Detecteur Fumées) : {'nValue': 0, 'sValue': 'Off'}, IGNORED , no changes !
2022-01-02 16:51:25.078 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:51:35.095 Deconz Plugins: (Deconz Plugins) onHeartbeat called 


 2022-01-02 16:56:57.042 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:56:57.043 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 16:56:57.043 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:56:57.044 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:56:57.069 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:56:58.772 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:56:58.774 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:56:58.774 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}
2022-01-02 16:56:58.799 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:56:58.800 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:56:58.830 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:56:58.830 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:56:58.831 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T15:56:58.755', 'on': False, 'temperature': 1950}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:56:58.832 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:05.094 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:57:10.353 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 20, Hue:
2022-01-02 16:57:10.353 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'auto'} (0 in buffer)
2022-01-02 16:57:10.353 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'auto'}
2022-01-02 16:57:10.370 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"auto"}}]
2022-01-02 16:57:10.370 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'auto'}}]
2022-01-02 16:57:10.371 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:10.371 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:10.372 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 16:57:10.372 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:10.372 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:10.389 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:10.331 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 16:57:13.044 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:13.044 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:13.045 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}
2022-01-02 16:57:13.060 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:13.060 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:13.077 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:13.077 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:13.077 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T15:57:13.023', 'on': False, 'temperature': 1950}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:13.078 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:15.084 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:57:15.786 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 80, Hue:
2022-01-02 16:57:15.787 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'program'} (0 in buffer)
2022-01-02 16:57:15.787 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'program'}
2022-01-02 16:57:15.803 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"program"}}]
2022-01-02 16:57:15.804 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'program'}}]
2022-01-02 16:57:15.854 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:15.854 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:15.855 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 16:57:15.856 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:15.856 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:57:15.880 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:15.758 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 16:57:16.882 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:16.882 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:16.883 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 16:57:16.884 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:16.884 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:16.900 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:18.503 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:18.504 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:18.505 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}
2022-01-02 16:57:18.528 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:18.529 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:18.555 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:18.555 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:18.556 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T15:57:18.469', 'on': False, 'temperature': 1950}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:18.557 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:22.164 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 80, Hue:
2022-01-02 16:57:22.165 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'program'} (0 in buffer)
2022-01-02 16:57:22.165 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'program'}
2022-01-02 16:57:22.189 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"program"}}]
2022-01-02 16:57:22.190 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'program'}}]
2022-01-02 16:57:22.240 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:22.241 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:22.242 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 16:57:22.242 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:22.242 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:57:22.266 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:22.321 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:22.323 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:22.325 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 16:57:22.326 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:22.326 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:22.354 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:22.145 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 16:57:23.657 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:23.658 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'attr': {'id': '1', 'lastannounced': None, 'lastseen': '2022-01-02T15:57Z', 'manufacturername': 'dresden elektronik', 'modelid': 'ConBee II', 'name': 'Configuration tool 1', 'swversion': '0x26720700', 'type': 'Configuration tool', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}, 'e': 'changed', 'id': '1', 'r': 'lights', 't': 'event', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}
2022-01-02 16:57:23.658 Deconz Plugins: (Deconz Plugins) Banned/Ignored device > 1 (lights)
2022-01-02 16:57:25.061 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:57:28.995 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 16:57:29.018 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 80, Hue:
2022-01-02 16:57:29.019 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'program'} (0 in buffer)
2022-01-02 16:57:29.019 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'program'}
2022-01-02 16:57:29.032 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"program"}}]
2022-01-02 16:57:29.033 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'program'}}]
2022-01-02 16:57:29.083 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:29.083 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:29.084 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 16:57:29.084 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:29.085 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 16:57:29.102 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:29.102 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 16:57:29.102 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 16:57:29.103 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 16:57:29.103 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 16:57:29.103 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 16:57:29.121 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '19.5'}, IGNORED , no changes !
2022-01-02 16:57:35.084 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 16:57:45.055 Deconz Plugins: (Deconz Plugins) onHeartbeat called

samourai47 · Message par **samourai47** » 02 janv. 2022, 17:13

Donc la je passe de manuel a periodes soit par domoticz soit par le thermostat et des fois il prends d'autre fois non, ou alors il bascule bien mais reste dans affiche dans domoticz dans le mode precedent...

Pas simple

Code : Tout sélectionner

 2022-01-02 17:08:53.616 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (23/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:08:54.605 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:08:54.609 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'attr': {'id': '1', 'lastannounced': None, 'lastseen': '2022-01-02T16:08Z', 'manufacturername': 'dresden elektronik', 'modelid': 'ConBee II', 'name': 'Configuration tool 1', 'swversion': '0x26720700', 'type': 'Configuration tool', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}, 'e': 'changed', 'id': '1', 'r': 'lights', 't': 'event', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}
2022-01-02 17:08:54.609 Deconz Plugins: (Deconz Plugins) Banned/Ignored device > 1 (lights)
2022-01-02 17:08:55.060 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:08:59.468 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 14: Parameter 'Set Level', Level: 10, Hue:
2022-01-02 17:08:59.468 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'mode': 'heat'} (0 in buffer)
2022-01-02 17:08:59.468 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'mode': 'heat'}
2022-01-02 17:08:59.482 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/mode":"heat"}}]
2022-01-02 17:08:59.482 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/mode': 'heat'}}]
2022-01-02 17:08:59.483 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:08:59.483 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:08:59.484 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 17:08:59.484 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}
2022-01-02 17:08:59.496 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:08:59.507 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:08:59.453 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (23/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:09:05.071 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:15.090 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:25.060 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:35.079 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:45.098 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:55.067 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:09:55.518 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:09:55.519 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'attr': {'id': '1', 'lastannounced': None, 'lastseen': '2022-01-02T16:09Z', 'manufacturername': 'dresden elektronik', 'modelid': 'ConBee II', 'name': 'Configuration tool 1', 'swversion': '0x26720700', 'type': 'Configuration tool', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}, 'e': 'changed', 'id': '1', 'r': 'lights', 't': 'event', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}
2022-01-02 17:09:55.519 Deconz Plugins: (Deconz Plugins) Banned/Ignored device > 1 (lights)
2022-01-02 17:10:03.093 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 20, Hue:
2022-01-02 17:10:03.093 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'auto'} (0 in buffer)
2022-01-02 17:10:03.093 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'auto'}
2022-01-02 17:10:03.113 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"auto"}}]
2022-01-02 17:10:03.114 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'auto'}}]
2022-01-02 17:10:03.164 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:03.165 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:03.166 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 17:10:03.166 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:03.166 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:10:03.178 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:03.063 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:10:05.082 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:10:05.734 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:05.734 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:05.735 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}
2022-01-02 17:10:05.745 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:05.745 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:10:05.756 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:05.757 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:05.757 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T16:10:05.711', 'on': False, 'temperature': 2050}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:05.757 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:11.920 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:11.922 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:11.924 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:10:11.924 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:11.924 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:10:11.941 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:14.647 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:14.647 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:14.648 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}
2022-01-02 17:10:14.658 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:14.658 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:10:14.669 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:14.669 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:14.669 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T16:10:14.604', 'on': False, 'temperature': 2050}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:14.670 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:15.071 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:10:25.089 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:10:27.043 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:27.044 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:27.045 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 17:10:27.046 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:27.046 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:10:27.059 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:27.110 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:27.111 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2300, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:27.113 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '23.0'}, IGNORED , no changes !
2022-01-02 17:10:27.114 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:27.114 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:10:27.135 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:29.892 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:29.895 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:29.895 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}
2022-01-02 17:10:29.909 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:10:29.909 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:10:29.927 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:29.927 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:10:29.928 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'e': 'changed', 'id': '11', 'r': 'sensors', 'state': {'lastupdated': '2022-01-02T16:10:29.877', 'on': False, 'temperature': 2050}, 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:10:29.929 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:10:35.091 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:10:45.064 Deconz Plugins: (Deconz Plugins) onHeartbeat called

samourai47 · Message par **samourai47** » 02 janv. 2022, 17:22

La je suis parti module eteint en mode Manuel. J'allume ca marche bascule bien en mode Periodes
Je rebascule en mode MAnuel, il effectue l'aciton sur le thermostat mais le device reste sur Periodes
J'eteint et la il bascule avant de s'eteindre sur Manuel.....

Code : Tout sélectionner

 2022-01-02 17:19:24.357 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:24.358 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'attr': {'id': '1', 'lastannounced': None, 'lastseen': '2022-01-02T16:19Z', 'manufacturername': 'dresden elektronik', 'modelid': 'ConBee II', 'name': 'Configuration tool 1', 'swversion': '0x26720700', 'type': 'Configuration tool', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}, 'e': 'changed', 'id': '1', 'r': 'lights', 't': 'event', 'uniqueid': '00:21:2e:ff:ff:07:b7:8b-01'}
2022-01-02 17:19:24.358 Deconz Plugins: (Deconz Plugins) Banned/Ignored device > 1 (lights)
2022-01-02 17:19:25.061 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:19:25.362 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 14: Parameter 'Set Level', Level: 10, Hue:
2022-01-02 17:19:25.362 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'mode': 'heat'} (0 in buffer)
2022-01-02 17:19:25.362 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'mode': 'heat'}
2022-01-02 17:19:25.387 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/mode":"heat"}}]
2022-01-02 17:19:25.388 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/mode': 'heat'}}]
2022-01-02 17:19:25.439 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:25.439 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:25.440 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:25.440 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}
2022-01-02 17:19:25.452 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:19:25.461 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:25.326 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (23/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:19:35.082 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:19:36.887 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 20, Hue:
2022-01-02 17:19:36.887 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'auto'} (0 in buffer)
2022-01-02 17:19:36.887 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'auto'}
2022-01-02 17:19:36.905 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"auto"}}]
2022-01-02 17:19:36.905 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'auto'}}]
2022-01-02 17:19:36.956 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:36.956 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:36.957 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:36.957 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:19:36.957 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:19:36.969 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:36.879 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:19:45.086 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:19:46.238 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 15: Parameter 'Set Level', Level: 80, Hue:
2022-01-02 17:19:46.239 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'preset': 'program'} (0 in buffer)
2022-01-02 17:19:46.239 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'preset': 'program'}
2022-01-02 17:19:46.260 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/preset":"program"}}]
2022-01-02 17:19:46.260 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/preset': 'program'}}]
2022-01-02 17:19:46.261 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:46.261 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:46.262 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:46.263 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:19:46.263 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:19:46.278 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:46.329 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:46.329 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'heat', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:46.330 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:46.331 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '10'}, IGNORED , no changes !
2022-01-02 17:19:46.331 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:19:46.342 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:46.214 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (24/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:19:55.058 Deconz Plugins: (Deconz Plugins) onHeartbeat called
2022-01-02 17:19:56.361 Deconz Plugins: (Deconz Plugins) onCommand called for Unit 14: Parameter 'Off', Level: 0, Hue:
2022-01-02 17:19:56.361 Deconz Plugins: (Deconz Plugins) Send Command /api/91BCD782C8/sensors/11/config with {'mode': 'off'} (0 in buffer)
2022-01-02 17:19:56.361 Deconz Plugins: (Deconz Plugins) Making Request: http://127.0.0.1:80/api/91BCD782C8/sensors/11/config with params {'mode': 'off'}
2022-01-02 17:19:56.375 Deconz Plugins: (Deconz Plugins) Request Return: [{"success":{"/sensors/11/config/mode":"off"}}]
2022-01-02 17:19:56.375 Deconz Plugins: (Deconz Plugins) Classic Data : [{'success': {'/sensors/11/config/mode': 'off'}}]
2022-01-02 17:19:56.425 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:56.426 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'off', 'offset': 0, 'on': False, 'preset': 'auto', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:56.427 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:56.427 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '0'}
2022-01-02 17:19:56.436 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 20, 'sValue': '20'}
2022-01-02 17:19:56.445 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:56.496 Deconz Plugins: (Deconz Plugins) onMessage called
2022-01-02 17:19:56.497 Deconz Plugins: (Deconz Plugins) ### WebSocket Data : {'config': {'heatsetpoint': 2100, 'locked': False, 'mode': 'off', 'offset': 0, 'on': False, 'preset': 'program', 'reachable': True, 'schedule': {}, 'schedule_on': False, 'setvalve': False}, 'e': 'changed', 'id': '11', 'r': 'sensors', 't': 'event', 'uniqueid': '90:35:ea:ff:fe:6e:e7:70-01-0201'}
2022-01-02 17:19:56.499 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '21.0'}, IGNORED , no changes !
2022-01-02 17:19:56.499 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '0'}, IGNORED , no changes !
2022-01-02 17:19:56.499 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 80, 'sValue': '80'}
2022-01-02 17:19:56.518 Deconz Plugins: (Deconz Plugins) ### Update device (Deconz Plugins - Thermostat 11) : {'nValue': 0, 'sValue': '20.5'}, IGNORED , no changes !
2022-01-02 17:19:56.321 Status: User: Admin (IP: 192.168.0.2) initiated a switch command (23/Deconz Plugins - Thermostat 11/Set Level)
2022-01-02 17:20:05.086 Deconz Plugins: (Deconz Plugins) onHeartbeat called

Thorgal · Message par **Thorgal** » 03 janv. 2022, 17:30

Oui c'est bien visible en logs

Mode = heat > ok
Preset = program> ok mais passage de suite apres en preset = auto

et quand
Mode = off > passage automatique en preset = program

Et par contre cette fois heatsetpoint ne change pas, donc ca ne peut pas etre lui le soucis.

Je vais demander sur l'issue coté deconz si d'autres personnes ont ce soucis, ca la je vois pas si ca vient du cote du code ou de l'appareil.
Dans le cas ou cela vienne du code de deconz, un test a faire si possible

- passer en mode = heat / preset = program
- activer les logs dans deconz, flag = "info", je t'ai pas demandé si tu avais le GUI ?
- passer en mode = off

Il me faudrait les logs commencant par "tuya debug"

samourai47 · Message par **samourai47** » 03 janv. 2022, 19:05

Je pense que c'est ce que tu demandes

Code : Tout sélectionner

18:03:47:968 Poll control check-in from 0x0015BC003100C892
18:03:52:206 ZCL attribute report 0x9035EAFFFE6EE770 for cluster: 0x0000, ep: 0x01, frame control: 0x08, mfcode: 0x0000 
18:03:54:683 Device TTL 2697 s flags: 0x7
18:03:55:653 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:03:55:654 Skip automatic channel change, TODO warn user
18:04:05:653 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:04:05:654 Skip automatic channel change, TODO warn user
18:04:15:653 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:04:15:654 Skip automatic channel change, TODO warn user
18:04:16:682 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f18020004000000c8
18:04:16:684 Tuya debug 5 : Status: 0 Transid: 47 Dp: 536 (0x02,0x18) Fn: 0 Data 200
18:04:22:499 Send Tuya request 0x9035EAFFFE6EE770 : Dp_type: 0x01, Dp_identifier 0x01, data: 00
18:04:22:557 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00270101000100
18:04:22:558 Tuya debug 5 : Status: 0 Transid: 39 Dp: 257 (0x01,0x01) Fn: 0 Data 0
18:04:22:588 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00280304000101
18:04:22:589 Tuya debug 5 : Status: 0 Transid: 40 Dp: 1027 (0x04,0x03) Fn: 0 Data 1
18:04:22:627 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002918020004000000c8
18:04:22:628 Tuya debug 5 : Status: 0 Transid: 41 Dp: 536 (0x02,0x18) Fn: 0 Data 200
18:04:25:067 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00291002000400000017
18:04:25:068 Tuya debug 5 : Status: 0 Transid: 41 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:125 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002a1002000400000017
18:04:25:126 Tuya debug 5 : Status: 0 Transid: 42 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:158 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002b1002000400000017
18:04:25:159 Tuya debug 5 : Status: 0 Transid: 43 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:197 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002c1002000400000017
18:04:25:198 Tuya debug 5 : Status: 0 Transid: 44 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:250 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:25:251 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:285 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00291002000400000017
18:04:25:286 Tuya debug 5 : Status: 0 Transid: 41 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:316 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002a1002000400000017
18:04:25:317 Tuya debug 5 : Status: 0 Transid: 42 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:349 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002b1002000400000017
18:04:25:350 Tuya debug 5 : Status: 0 Transid: 43 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:387 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002c1002000400000017
18:04:25:388 Tuya debug 5 : Status: 0 Transid: 44 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:418 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:25:419 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:477 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002e1002000400000017
18:04:25:478 Tuya debug 5 : Status: 0 Transid: 46 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:509 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:25:510 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:540 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00301002000400000017
18:04:25:541 Tuya debug 5 : Status: 0 Transid: 48 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:622 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00311002000400000017
18:04:25:623 Tuya debug 5 : Status: 0 Transid: 49 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:654 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:04:25:655 Skip automatic channel change, TODO warn user
18:04:25:681 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00321002000400000017
18:04:25:682 Tuya debug 5 : Status: 0 Transid: 50 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:722 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00331002000400000017
18:04:25:723 Tuya debug 5 : Status: 0 Transid: 51 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:766 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00341002000400000017
18:04:25:767 Tuya debug 5 : Status: 0 Transid: 52 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:807 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002a1002000400000017
18:04:25:808 Tuya debug 5 : Status: 0 Transid: 42 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:849 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002b1002000400000017
18:04:25:850 Tuya debug 5 : Status: 0 Transid: 43 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:960 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002c1002000400000017
18:04:25:961 Tuya debug 5 : Status: 0 Transid: 44 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:25:999 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:26:000 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:063 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002e1002000400000017
18:04:26:064 Tuya debug 5 : Status: 0 Transid: 46 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:102 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:26:103 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:281 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00301002000400000017
18:04:26:282 Tuya debug 5 : Status: 0 Transid: 48 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:356 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00311002000400000017
18:04:26:357 Tuya debug 5 : Status: 0 Transid: 49 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:394 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002b1002000400000017
18:04:26:395 Tuya debug 5 : Status: 0 Transid: 43 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:450 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002c1002000400000017
18:04:26:451 Tuya debug 5 : Status: 0 Transid: 44 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:496 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:26:497 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:691 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002e1002000400000017
18:04:26:693 Tuya debug 5 : Status: 0 Transid: 46 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:754 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:26:756 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:799 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00301002000400000017
18:04:26:800 Tuya debug 5 : Status: 0 Transid: 48 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:851 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002c1002000400000017
18:04:26:853 Tuya debug 5 : Status: 0 Transid: 44 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:896 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:26:897 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:26:985 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002e1002000400000017
18:04:26:986 Tuya debug 5 : Status: 0 Transid: 46 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:028 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:27:029 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:078 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00301002000400000017
18:04:27:079 Tuya debug 5 : Status: 0 Transid: 48 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:121 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00311002000400000017
18:04:27:122 Tuya debug 5 : Status: 0 Transid: 49 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:160 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00321002000400000017
18:04:27:161 Tuya debug 5 : Status: 0 Transid: 50 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:225 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00331002000400000017
18:04:27:226 Tuya debug 5 : Status: 0 Transid: 51 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:277 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00341002000400000017
18:04:27:278 Tuya debug 5 : Status: 0 Transid: 52 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:316 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00351002000400000017
18:04:27:318 Tuya debug 5 : Status: 0 Transid: 53 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:356 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00361002000400000017
18:04:27:357 Tuya debug 5 : Status: 0 Transid: 54 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:398 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00371002000400000017
18:04:27:399 Tuya debug 5 : Status: 0 Transid: 55 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:437 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002d1002000400000017
18:04:27:438 Tuya debug 5 : Status: 0 Transid: 45 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:477 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002e1002000400000017
18:04:27:478 Tuya debug 5 : Status: 0 Transid: 46 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:517 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:27:518 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:556 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00351002000400000017
18:04:27:557 Tuya debug 5 : Status: 0 Transid: 53 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:622 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00291002000400000017
18:04:27:623 Tuya debug 5 : Status: 0 Transid: 41 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:669 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:27:670 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:710 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00331002000400000017
18:04:27:711 Tuya debug 5 : Status: 0 Transid: 51 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:752 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00361002000400000017
18:04:27:753 Tuya debug 5 : Status: 0 Transid: 54 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:796 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 002f1002000400000017
18:04:27:797 Tuya debug 5 : Status: 0 Transid: 47 Dp: 528 (0x02,0x10) Fn: 0 Data 23
18:04:27:901 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00302404000101
18:04:27:903 Tuya debug 5 : Status: 0 Transid: 48 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:27:943 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00312404000101
18:04:27:944 Tuya debug 5 : Status: 0 Transid: 49 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:27:988 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00322404000101
18:04:27:989 Tuya debug 5 : Status: 0 Transid: 50 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:027 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00332404000101
18:04:28:028 Tuya debug 5 : Status: 0 Transid: 51 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:065 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00342404000101
18:04:28:066 Tuya debug 5 : Status: 0 Transid: 52 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:165 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00352404000101
18:04:28:166 Tuya debug 5 : Status: 0 Transid: 53 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:203 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00362404000101
18:04:28:204 Tuya debug 5 : Status: 0 Transid: 54 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:241 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00372404000101
18:04:28:242 Tuya debug 5 : Status: 0 Transid: 55 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:280 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00382404000101
18:04:28:281 Tuya debug 5 : Status: 0 Transid: 56 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:377 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00392404000101
18:04:28:378 Tuya debug 5 : Status: 0 Transid: 57 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:416 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003a2404000101
18:04:28:417 Tuya debug 5 : Status: 0 Transid: 58 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:455 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003b2404000101
18:04:28:456 Tuya debug 5 : Status: 0 Transid: 59 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:509 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003c2404000101
18:04:28:510 Tuya debug 5 : Status: 0 Transid: 60 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:556 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003d2404000101
18:04:28:557 Tuya debug 5 : Status: 0 Transid: 61 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:599 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003e2404000101
18:04:28:600 Tuya debug 5 : Status: 0 Transid: 62 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:648 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 003f2404000101
18:04:28:649 Tuya debug 5 : Status: 0 Transid: 63 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:832 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00402404000101
18:04:28:833 Tuya debug 5 : Status: 0 Transid: 64 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:872 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00412404000101
18:04:28:873 Tuya debug 5 : Status: 0 Transid: 65 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:912 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00422404000101
18:04:28:913 Tuya debug 5 : Status: 0 Transid: 66 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:28:950 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00432404000101
18:04:28:951 Tuya debug 5 : Status: 0 Transid: 67 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:010 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00442404000101
18:04:29:011 Tuya debug 5 : Status: 0 Transid: 68 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:053 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00452404000101
18:04:29:054 Tuya debug 5 : Status: 0 Transid: 69 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:093 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00462404000101
18:04:29:094 Tuya debug 5 : Status: 0 Transid: 70 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:154 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00472404000101
18:04:29:155 Tuya debug 5 : Status: 0 Transid: 71 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:206 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00512404000101
18:04:29:207 Tuya debug 5 : Status: 0 Transid: 81 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:246 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00602404000101
18:04:29:247 Tuya debug 5 : Status: 0 Transid: 96 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:283 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 006e2404000101
18:04:29:284 Tuya debug 5 : Status: 0 Transid: 110 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:323 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 007c2404000101
18:04:29:324 Tuya debug 5 : Status: 0 Transid: 124 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:509 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 008b2404000101
18:04:29:510 Tuya debug 5 : Status: 0 Transid: 139 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:561 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00992404000101
18:04:29:562 Tuya debug 5 : Status: 0 Transid: 153 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:603 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 009a2404000101
18:04:29:604 Tuya debug 5 : Status: 0 Transid: 154 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:647 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 00412404000101
18:04:29:648 Tuya debug 5 : Status: 0 Transid: 65 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:29:690 Tuya debug 4 : Address 0x9035EAFFFE6EE770 Payload 004f2404000101
18:04:29:691 Tuya debug 5 : Status: 0 Transid: 79 Dp: 1060 (0x04,0x24) Fn: 0 Data 1
18:04:35:655 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:04:35:656 Skip automatic channel change, TODO warn user
18:04:45:653 apsUseExtPanid is 0xDDDDDDDDDDDDDDDD but should be 0, start reconfiguration
18:04:45:654 Skip automatic channel change, TODO warn user

Forum Domoticz en français

Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes

Re: Moes