Compteur gaz et eau

[edward057]

hello tous le monde une très bonne année et une bonne santé

je viens vers vous pour avoir vos lumière car j'ai un petit problème je cherche a intégrer mon compteur d'eau et compteur gaz dans domoticz via un ESP32, compteur gazpart et un capteur inductif (en photo)

IMG_1155 - copie.jpg (791.44 Kio) Consulté 896 fois

j'ai mis ce code dans l'ESP32

Code : Tout sélectionner

on COUNTER#C1 do Publish domoticz/in {"idx":52, "nvalue":0,"svalue":"%value%"} endon on COUNTER#C2 do Publish domoticz/in {"idx":51, "nvalue":0,"svalue":"%value%"} endon on COUNTER#C2 do Publish domoticz/in {"idx":53, "nvalue":0,"svalue":"%value%"} endon

dans la conssole de l'ESP32 montre qu'il sort bien les donnée vers domoticz

Code : Tout sélectionner

11:51:11.151 RUL: COUNTER#C1 performs "Publish domoticz/in {"idx":52, "nvalue":0,"svalue":"24"}"
11:51:11.165 MQT: domoticz/in = {"idx":52, "nvalue":0,"svalue":"24"}
11:51:11.183 RUL: COUNTER#C2 performs "Publish domoticz/in {"idx":51, "nvalue":0,"svalue":"56"}"
11:51:11.196 MQT: domoticz/in = {"idx":51, "nvalue":0,"svalue":"56"}
11:51:11.211 RUL: COUNTER#C2 performs "Publish domoticz/in {"idx":53, "nvalue":0,"svalue":"56"}"
11:51:11.225 MQT: domoticz/in = {"idx":53, "nvalue":0,"svalue":"56"}

je sort déjà d'autre donnée d'un PZEM004 sur le même ESP

Code : Tout sélectionner

on ENERGY#ReactivePower do Publish domoticz/in {"idx":37,"nvalue":0,"svalue":"%value%"} endon on ENERGY#ApparentPower do Publish domoticz/in {"idx":36,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Factor do Publish domoticz/in {"idx":39,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Frequency do Publish domoticz/in {"idx":38,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Power do Publish domoticz/in {"idx":40,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Voltage do Publish domoticz/in {"idx":33,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Current do Publish domoticz/in {"idx":32,"nvalue":0,"svalue":"%value%"} endon on ENERGY#Total do Publish domoticz/in {"idx":42,"nvalue":0,"svalue":"%value%"} endon

la sortie est bonne et s’intègre sans problème dans domoticz

Code : Tout sélectionner

12:05:45.395 RUL: ENERGY#REACTIVEPOWER performs "Publish domoticz/in {"idx":37,"nvalue":0,"svalue":"257.3"}"
12:05:45.410 MQT: domoticz/in = {"idx":37,"nvalue":0,"svalue":"257.3"}
12:05:45.427 RUL: ENERGY#APPARENTPOWER performs "Publish domoticz/in {"idx":36,"nvalue":0,"svalue":"351.1"}"
12:05:45.442 MQT: domoticz/in = {"idx":36,"nvalue":0,"svalue":"351.1"}
12:05:45.458 RUL: ENERGY#FACTOR performs "Publish domoticz/in {"idx":39,"nvalue":0,"svalue":"0.68"}"
12:05:45.472 MQT: domoticz/in = {"idx":39,"nvalue":0,"svalue":"0.68"}
12:05:45.487 RUL: ENERGY#FREQUENCY performs "Publish domoticz/in {"idx":38,"nvalue":0,"svalue":"50.00"}"
12:05:45.499 MQT: domoticz/in = {"idx":38,"nvalue":0,"svalue":"50.00"}
12:05:45.515 RUL: ENERGY#POWER performs "Publish domoticz/in {"idx":40,"nvalue":0,"svalue":"238.9"}"
12:05:45.528 MQT: domoticz/in = {"idx":40,"nvalue":0,"svalue":"238.9"}
12:05:45.544 RUL: ENERGY#VOLTAGE performs "Publish domoticz/in {"idx":33,"nvalue":0,"svalue":"236.1"}"
12:05:45.558 MQT: domoticz/in = {"idx":33,"nvalue":0,"svalue":"236.1"}
12:05:45.574 RUL: ENERGY#CURRENT performs "Publish domoticz/in {"idx":32,"nvalue":0,"svalue":"1.49"}"
12:05:45.587 MQT: domoticz/in = {"idx":32,"nvalue":0,"svalue":"1.49"}
12:05:45.602 RUL: ENERGY#TOTAL performs "Publish domoticz/in {"idx":42,"nvalue":0,"svalue":"24.20"}"
12:05:45.614 MQT: domoticz/in = {"idx":42,"nvalue":0,"svalue":"24.20"}

ici la capture d'ecran de domoticz

Capture d’écran 2022-01-07 à 11.07.14.png (520.29 Kio) Consulté 896 fois

et je suis allez voir dans les LOG de domoticz et j'ai vue ça

Code : Tout sélectionner

 2022-01-07 11:08:43.412 Error: MQTT: MQTT: Invalid data received!
2022-01-07 11:08:43.512 Error: MQTT: MQTT: Invalid data received!
2022-01-07 11:08:43.613 Error: MQTT: MQTT: Invalid data received! 

donc je comprend pas trop car les règle sont les même tous pareille mais ca marche pas HELP ME plz

Merci a vous par avance