Voici un exemple de fichier JSON à créer pour réaliser la configuration.
Code : Tout sélectionner
{
"Car windows": {
"topic": "volvo/xx-999-xx/binary_sensor/any_window_open/state",
"type": "244", "subtype": "73", "switchtype": "11",
"mapping": {"item": "", "default": "1", "values": {"close": "0"}}
},
"Car lock": {
"topic": "volvo/xx-999-xx/lock/lock/state",
"type": "244", "subtype": "73","switchtype": "11",
"mapping": {"item": "", "default": "0", "values": {"lock": "1"}}
},
"Car engine running": {
"topic": "volvo/xx-999-xx/binary_sensor/is_engine_running/state",
"type": "244", "subtype": "73", "switchtype": "8",
"mapping": {"item": "", "default": "1", "values": {"off": "0"}
}
},
"Car odometer": {"topic": "volvo/xx-999-xx/sensor/odometer/state",
"type": "113", "subtype": "0", "switchtype": "3",
"options": {"ValueQuantity":"Distance", "ValueUnits":"km"},
"mapping": {"item": ""}
},
"Car fuel amount": {"topic": "volvo/xx-999-xx/sensor/fuel_amount/state",
"type": "243", "subtype": "31", "switchtype": "0",
"options": {"Custom":"1;L"},
"mapping": {"item": ""}
},
"Beed room temperature": {
"topic": "beedRoom",
"type": "80", "subtype": "5", "switchtype": "0",
"mapping": {"item": "temperature"}
},
"Kitchen temperature": {"topic": "zigbee2mqtt/Kitchen",
"type": "82", "subtype": "5", "switchtype": "0",
"mapping": {"item": "temperature;humidity"}
},
"Boiler power": {
"topic": "boiler/SENSOR",
"type": "248", "subtype": "1", "switchtype": "0",
"mapping": {"item": "ENERGY/Power;ENERGY/Total"}}
}
