[RESOLU] pb gpio et domoticz.sh

[didier02]

bonjour, j'ai un soucis avec mon domoticz.sh

si on veut utiliser les entrées / sorties gpio du rpi, il faud bien modifié le fichier domoticz.sh dans /etc/init.d/domoticz.sh ?

pour les sortie on ecrit :

/usr/local/bin/gpio export 22 out

par exemple ,
et pour les entées :

/usr/local/bin/gpio export 17 in
/usr/local/bin/gpio edge 17 both

...
mon problème et que si je met : /usr/local/bin/gpio edge 17 both , ca me fait tourné le rpi en permanence pour surveiller cette entrée et il ralentit pas possible

Code : Tout sélectionner

2022-12-23 18:01:50.841 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:50.843 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:51.170 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:51.221 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:51.224 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:51.511 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:51.561 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:51.564 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:52.011 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:52.061 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:52.065 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:52.983 1wire: Temp (Temp ext)
2022-12-23 18:01:53.211 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:53.261 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:53.263 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:53.291 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:53.317 EventSystem: Event triggered: chauffage sdb alarme duree_2
2022-12-23 18:01:53.341 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:53.345 temporisation: Light/Switch (temporisation sdb -- haut normal eteint)
2022-12-23 18:01:53.357 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:53.531 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:53.582 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:53.585 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:54.032 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:54.082 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:54.084 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:54.193 zigate: UpdateDevice - ( sdb haut) 0:21.7;66.8;1
2022-12-23 18:01:54.208 zigate: UpdateDevice - ( sdb haut) 66.8:1
2022-12-23 18:01:54.212 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:54.262 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:54.264 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:55.052 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:55.102 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:55.105 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:55.232 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:55.282 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:55.285 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:55.872 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:55.923 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:55.923 teleinfo edf: General/kWh (Teleinfo kWh Heures Creuses)
2022-12-23 18:01:55.952 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:55.953 teleinfo edf: General/kWh (Teleinfo kWh Heures Pleines)
2022-12-23 18:01:55.980 teleinfo edf: P1 Smart Meter (Teleinfo kWh Total - compteur linky)
2022-12-23 18:01:56.002 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:56.015 teleinfo edf: Current (Teleinfo watts)
2022-12-23 18:01:56.031 teleinfo edf: General/Percentage (Teleinfo Pourcentage de Charge)
2022-12-23 18:01:56.041 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:56.053 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:56.693 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:56.743 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:56.746 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:56.893 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:56.943 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:56.944 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.133 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.183 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.185 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.393 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.443 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.445 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.473 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.523 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.525 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.713 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.763 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.766 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.793 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.844 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.846 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:57.913 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:57.963 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:57.965 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:58.053 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:58.103 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:58.105 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:58.954 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:58.994 1wire: Temp (ECS depart chaudiere)
2022-12-23 18:01:59.004 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:59.018 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:59.074 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:59.124 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:59.126 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:59.414 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:59.464 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:59.466 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:59.474 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:59.524 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:59.526 port GPIO: Lighting 1 (atelier)
2022-12-23 18:01:59.674 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:01:59.724 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:01:59.726 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:00.054 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:00.104 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:00.107 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:00.454 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:00.505 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:00.507 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:00.614 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:00.665 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:00.667 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:00.814 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:00.865 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:00.866 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:01.014 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:01.064 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:01.066 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:01.095 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:01.145 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:01.146 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:01.835 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:01.885 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:01.888 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:02.235 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:02.285 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:02.287 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:02.572 teleinfo edf: General/kWh (Teleinfo kWh Heures Creuses)
2022-12-23 18:02:02.589 teleinfo edf: General/kWh (Teleinfo kWh Heures Pleines)
2022-12-23 18:02:02.605 teleinfo edf: P1 Smart Meter (Teleinfo kWh Total - compteur linky)
2022-12-23 18:02:02.623 teleinfo edf: Current (Teleinfo watts)
2022-12-23 18:02:02.635 teleinfo edf: General/Percentage (Teleinfo Pourcentage de Charge)
2022-12-23 18:02:02.675 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:02.725 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:02.727 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:03.075 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:03.126 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:03.128 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:03.219 EventSystem: Event triggered: chauffage sdb alarme duree_2
2022-12-23 18:02:03.234 temporisation: Light/Switch (temporisation sdb -- haut normal eteint)
2022-12-23 18:02:03.656 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:03.706 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:03.707 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:04.176 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:04.226 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:04.229 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:04.656 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:04.706 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:04.710 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:05.336 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:05.386 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:05.390 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:05.977 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:06.027 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:06.029 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:06.177 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:06.227 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:06.229 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:06.237 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:06.287 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:06.289 port GPIO: Lighting 1 (atelier)
2022-12-23 18:02:06.897 port GPIO: Processing interrupt for GPIO 17...
2022-12-23 18:02:06.947 port GPIO: Done processing interrupt for GPIO 17.
2022-12-23 18:02:06.950 port GPIO: Lighting 1 (atelier)

.
çà , ca me le faisait pas avant , .... où est ce que j'ai fais une erreur ?
ca fait 2 jours que je tourne en rond ... les sorties fonctionnent bien , mais pas les entrées ..

[fcBourgogne]

Bonjour,

Il semblerait que l'entrée détecte des niveaux type haut!

Peut être que pulldown de 4.7Ko fera stopper ces détections intempestives.

A+

[didier02]

??? ok merci pour l'idée, je vais creuser de ce coté ..,
je suis toujours ennuyer avec çà ... , j'ai dus carrément supprimé les entrées , tellement ca me ralentis mon rpi ...
Ce que je comprend pas, c'est qu' il me semble que c'est survenus après une mise à jour automatique de domoticz .
En tout cas, sans modification de quoi que ce sois de ma part !! Ni logiciel ni câblage ...

[didier02]

Donc , effectivement , c'était bien parce que je n'avais pas installé de résistance ... merci fcBourgogne de l'idée ..
Au début cela fonctionner sans , mais juste limite de bascule , et je sais toujours pas pourquoi .. là çà choppé des valeurs aléatoires 0 ou 1 suivant les hauses du secteur peut être ...