[Résolu] Zigate - Frient SMSZB-120 non reconnu

[anthropo]

Bonjour

je teste depuis peu une clé ZiGate+ (V2) sur mon domoticz 2023.2, sur un raspberry pi 4 avec l'OS 12 (bookworm)

Je n'arrive pas à appairer mon capteur de fumée Frient SMSZB-120 , rien dans les traces, bref je ne sais pas où chercher.

Merci pour votre aide, ça fait quelques heures que je cherche ....

Bien sûr j'arrive à inclure d'autres objets comme des thermomètres

[pipiche]

As-tu regardé ici viewtopic.php?t=10886 y-a pas d'information, notamment des choses qui pointent vers le wiki du plugin

Je te confirme que ce device fonctionne avec le plugin.

Ensuite avec la Zigate V2, c'est avoir car il me semble qu'il y avait un soucis à une epoque, Il faut à minima le firmware 3a0

Après la Zigate est pas forcément la panacé, le firmware est obsolète, peut de mise à jour et très instable.

[anthropo]

Merci pour cette réponse rapide !

j'ai bien la Version 7.1.004 du plugin, c'est bien Display Firmware Version: "Zig - 03a0"

j'ai aussi une clé Deconz conbee2 c'est mieux ?

[anthropo]

Version: 2023.2
Build Hash: 19efd039c
Compile Date: 2023-07-21 17:23:44
dzVents Version: 3.1.8
Python Version: 3.11.2 (main, Mar 13 2023, 12:18:29) [GCC 12.2.0]
Active User: admin

Branche du plugin : stable 7

[anthropo]

2023-11-14 23:01:23,304 INFO :b'Accepting new Hardware: Enable (On)'
2023-11-14 23:02:01,057 INFO :b'Decode8400 - IAS Zone Enroll Request NwkId: 7aa8/23 Sqn: 02 ZoneType: 0028 Manuf: 1015'
2023-11-14 23:02:01,210 ERROR : [ZiGateForwarder_17] Decode8401 - unknown IAS device 7aa8 from plugin


c'est lui, il le voit

Code : Tout sélectionner

2023-11-14 23:11:05.579 Status: ZiGate: Max : 0 sec
2023-11-14 23:11:05.579 Status: ZiGate: Average : 0 sec
2023-11-14 23:11:05.579 Status: ZiGate: Sent:
2023-11-14 23:11:05.579 Status: ZiGate: TX commands : 81
2023-11-14 23:11:05.579 Status: ZiGate: Max Load (Queue) : 8
2023-11-14 23:11:05.580 Status: ZiGate: Max aPDU (Queue) : 2
2023-11-14 23:11:05.580 Status: ZiGate: Max nPDU (Queue) : 5
2023-11-14 23:11:05.580 Status: ZiGate: TX failed : 0 (0.0%)
2023-11-14 23:11:05.580 Status: ZiGate: TX timeout : 0 (0.0%)
2023-11-14 23:11:05.580 Status: ZiGate: TX data timeout : 0 (0.0%)
2023-11-14 23:11:05.580 Status: ZiGate: TX reTransmit : 0 (0.0%)
2023-11-14 23:11:05.580 Status: ZiGate: TX APS Failure : 0 (0.0%)
2023-11-14 23:11:05.581 Status: ZiGate: TX APS Ack : 29 (35.8%)
2023-11-14 23:11:05.581 Status: ZiGate: TX APS Nck : 9 (11.11%)
2023-11-14 23:11:05.581 Status: ZiGate: Received:
2023-11-14 23:11:05.581 Status: ZiGate: RX frame : 245
2023-11-14 23:11:05.581 Status: ZiGate: RX crc errors : 0 (0.0%)
2023-11-14 23:11:05.581 Status: ZiGate: RX lentgh errors : 0 (0.0%)
2023-11-14 23:11:05.581 Status: ZiGate: RX clusters : 19
2023-11-14 23:11:05.582 Status: ZiGate: RX clusters KO : 0
2023-11-14 23:11:05.582 Status: ZiGate: Operating time : 1 Hours 15 Mins 59 Secs
2023-11-14 23:11:05.894 Status: ZiGate: Exiting work loop.
2023-11-14 23:11:05.964 Status: ZiGate: Stopping threads.
2023-11-14 23:11:05.964 Status: ZiGate: Stopped.
2023-11-14 23:11:05.964 Status: ZiGate: Entering work loop.
2023-11-14 23:11:05.964 Status: ZiGate: Started.
2023-11-14 23:11:07.058 Status: ZiGate: Initialized version 7.1, author 'pipiche38'
2023-11-14 23:11:07.060 Status: ZiGate: Zigbee for Domoticz plugin starting
2023-11-14 23:11:07.060 Status: ZiGate: Z4D plugin requires python3 3.8 or above and you are running 3.11
2023-11-14 23:11:07.060 Status: ZiGate: Checking Python modules /opt/domoticz/plugins/Domoticz-Zigbee/requirements.txt
2023-11-14 23:11:08.084 Status: ZiGate: Certified Devices loaded - 532 confs loaded
2023-11-14 23:11:08.085 Status: ZiGate: load ListOfDevice
2023-11-14 23:11:08.094 Status: ZiGate: 2 Entries loaded from /opt/domoticz/plugins/Domoticz-Zigbee/Data/DeviceList-17.txt
2023-11-14 23:11:08.099 Status: ZiGate: Transport mode: V2-USB
2023-11-14 23:11:08.634 Status: ZiGate: ZigateTransport: Serial Connection open: Serial<id=0x7f3deaccd0, open=True>(port='/dev/ttyUSB10', baudrate=115200, bytesize=8, parity='N', stopbits=1, timeout=None, xonxoff=False, rtscts=False, dsrdtr=False)
2023-11-14 23:11:08.635 Status: ZiGate: ZigateTransport: writer_thread Thread start.
2023-11-14 23:11:08.637 Status: ZiGate: ZigateTransport: thread_processing_and_sending Thread start.
2023-11-14 23:11:08.638 Status: ZiGate: Start Web Server connection
2023-11-14 23:11:08.649 Status: ZiGate: Web backend for Web User Interface started on port: 9440
2023-11-14 23:11:08.679 Status: ZiGate: Plugin looks to upgrade the Certified Device package
2023-11-14 23:11:11.123 Status: ZiGate: Domoticz Widgets usage is at 2.4 % (249 units free)
2023-11-14 23:11:20.167 Status: ZiGate: ==> Transport Mode switch to full mode
2023-11-14 23:11:20.170 Status: ZiGate: ZiGate+ (V2)
2023-11-14 23:11:20.171 Status: ZiGate: Installer Version Number: 03a0
2023-11-14 23:11:20.172 Status: ZiGate: Branch Version: ==> Production <==
2023-11-14 23:11:20.216 Status: ZiGate: Upgrade Serial line to RTS/CTS HW flow control
2023-11-14 23:11:30.156 Status: ZiGate: Zigbee Coordinator ieee: 00158d0009520141 , short addr: 0000
2023-11-14 23:11:30.156 Status: ZiGate: Network state UP, PANID: 3066 extPANID: 0xe6d2f7daa37f407a Channel: 11
2023-11-14 23:11:35.083 Status: ZiGate: Request Disabling Accepting new Hardware
2023-11-14 23:11:35.569 Status: ZiGate: Accepting new Hardware: Disable (Off)
2023-11-14 23:11:35.671 Status: ZiGate: Number of devices recently active in Coordinator = 2
2023-11-14 23:11:35.672 Status: ZiGate: [00] DevID: 00 Network addr: c70f IEEE: 5c0272fffeca9327 LQI: 000 power: 02 Model: TS0201 ( Temperature Salon )
2023-11-14 23:11:35.673 Status: ZiGate: [01] DevID: 01 Network addr: 7aa8 IEEE: 0015bc003100db10 LQI: 070 power: 02 not found in plugin database!
2023-11-14 23:11:40.096 Status: ZiGate: coordinator set to Certification : 1/CE -> CE
2023-11-14 23:11:41.080 Status: ZiGate: ota_scan_folder Following Firmware have been loaded
2023-11-14 23:11:41.081 Status: ZiGate: Plugin with Zigate+, firmware 03a0 correctly initialized

[anthropo]

Pu..n ! ça y est à force de le tripoter :

Code : Tout sélectionner

2023-11-14 23:17:35.650 Status: ZiGate: [-] NEW OBJECT: 7aa8 Simple Descriptor Response EP: 0x23 LQI: 46
2023-11-14 23:17:35.651 Status: ZiGate: [-] NEW OBJECT: 7aa8 ProfileID 0104
2023-11-14 23:17:35.652 Status: ZiGate: [-] NEW OBJECT: 7aa8 ZDeviceID 0402
2023-11-14 23:17:35.652 Status: ZiGate: [-] NEW OBJECT: 7aa8 Application Version 0000
2023-11-14 23:17:35.653 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster IN Count: 07
2023-11-14 23:17:35.655 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 1: 0000 (Basic)
2023-11-14 23:17:35.656 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 2: 0001 (Power Configuration)
2023-11-14 23:17:35.658 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 3: 0003 (Identify)
2023-11-14 23:17:35.659 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 4: 000f (Binary Input (Basic))
2023-11-14 23:17:35.660 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 5: 0020 (Poll Control)
2023-11-14 23:17:35.662 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 6: 0500 (IAS Zone)
2023-11-14 23:17:35.664 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 7: 0502 (IAS WD (Warning Device))
2023-11-14 23:17:35.665 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster OUT Count: 02
2023-11-14 23:17:35.666 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster Out 1: 000a (Time)
2023-11-14 23:17:35.668 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster Out 2: 0019 (Over-the-Air Upgrade)
2023-11-14 23:17:35.668 Status: ZiGate: [-] NEW OBJECT: 7aa8 Request Simple Descriptor for Ep: 26
2023-11-14 23:17:37.066 ZiGate: Disable Assisted pairing
2023-11-14 23:17:37.069 Status: ZiGate: Request Disabling Accepting new Hardware
2023-11-14 23:17:38.581 Status: ZiGate: [-] NEW OBJECT: 7aa8 Simple Descriptor Response EP: 0x26 LQI: 49
2023-11-14 23:17:38.582 Status: ZiGate: [-] NEW OBJECT: 7aa8 ProfileID 0104
2023-11-14 23:17:38.583 Status: ZiGate: [-] NEW OBJECT: 7aa8 ZDeviceID 0302
2023-11-14 23:17:38.584 Status: ZiGate: [-] NEW OBJECT: 7aa8 Application Version 0000
2023-11-14 23:17:38.584 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster IN Count: 03
2023-11-14 23:17:38.586 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 1: 0000 (Basic)
2023-11-14 23:17:38.587 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 2: 0003 (Identify)
2023-11-14 23:17:38.588 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster In 3: 0402 (Temperature Measurement)
2023-11-14 23:17:38.589 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster OUT Count: 01
2023-11-14 23:17:38.590 Status: ZiGate: [-] NEW OBJECT: 7aa8 Cluster Out 1: 0003 (Identify)
2023-11-14 23:17:38.794 Status: ZiGate: Accepting new Hardware: Disable (Off)

[anthropo]

Je met le dernier

PluginZigbee_17.log.zip

(13.63 Kio) Téléchargé 112 fois

log au cas où ça serve à quelque chose

[pipiche]

merci du retour . bonne continuation à toi

[Keros]

Si le sujet est terminé, merci de bien vouloir modifier le premier message de cette discussion pour indiquer [Résolu] dans le titre du sujet. Comment faire ? Voir le sujet [A lire avant de poster] Guide pour bien formuler une demande.