Je copie ici le post d'information, car je me suis rendu compte que les anciens sont supprimés. On aura une copie pour historique.
Copie du message initial faite le 15/01/2024 à 20h18
It's time again for a new stable release!
This could not have happened without the help of everyone who contributed to make this happen!
Forum moderators, users, beta testers and specially all those who contributed with code! Thank you once again!!!
As always, PLEASE make a FULL backup of your Domoticz folder (or in case of an embedded system, your SD card!)
This way you can always return to the previous version you were running before this update!
Thanks to all volunteers who helped with the implementation! I know it was a lot of work with a lot of stress!
As the previous release was only 14 days ago, the history of 2024.1 will also be displayed here.
A few notes before updating:
- Because some users are still experiencing migration issues to ZWaveJS-UI, OpenZWave is back (No support!).
The OpenZWave project was stopped 2 years ago.
We still urge ysers using OpenZWave to migrate to ZWaveJS-UI in combination with the MQTT Autodiscovery method build into Domoticz.
(See https://www.domoticz.com/wiki/Zwave-JS-UI)
- Armv6 device support has been stopped. Sure, you can still build Domoticz yourself, but no binary versions are published anymore.
This means devices like the Raspberry Pi 1, Pi Zero from ~12 years ago are not supported anymore.
- When using Domoticz with client/server setup (multiple locations), it is important that both server and client run this version or a beta.
- Support for remote updating a RFXCom transceiver has been removed as it was not working 100% with the latest models.
This was a joined decision between us, and you now need to use the flash application from the RFXCom website.
Here are the most important changes (there are way too many changes to list them all):
Version 2024.2 (January 15th 2024)
- Implemented: Compare chart for most sensor types
- Implemented: Email, Splitting mime attachments over multiple lines
- Implemented: Notifications, Option to enable/disable
- Implemented: OpenZwave is back.... (No Support)
- Updated: Translations
- Changed: Comparing charts now uses correct Y-Axis label
- Changed: Internal, Last received is now handled differently, should solve possible hardware timeout issues
- Changed: MQTT, QoS is now set to 1 for all messages
- Fixed: MQTT-AD: Fan creation
- Fixed: Timer Plans, now also duplicates scenes
Version 2024.1 (January 1th 2024)
- Implemented: AlfenEve, added charging indication switch
- Implemented: AlfenEve, added option to specify charge current (or disable this)
- Implemented: AlfenEve, added Solar charging mode and settings
- Implemented: Counter report, now possible to remove data point (via shift click) from month chart
- Implemented: Devices overview, Setpoint log button
- Implemented: Enever, added support for providers Atoom Alliantie, Energie van Ons, Vandebron, Wout Energie
- Implemented: Enever, option to specify different providers for Gas/Electricity
- Implemented: Enever: added two user variables for average gas/electricity price
- Implemented: Enphase, counter helper to prevent turnover caused by powerloss, reboot or other envoy issues
- Implemented: Enphase, Initial support for Encharge battery status (needs more work)
- Implemented: Livesearch, included hardware name and optimized search algorithm to search all entered strings
- Implemented: Managed Counters, now possible to use negative values
- Implemented: Mitsubishi WF RAC Airconditioning
- Implemented: MQTT-AD, added support for climate min_temp/max_temp and temp_step
- Implemented: MQTT-AD, added support for number voc type
- Implemented: MQTT-AD, added support for Wh and Wm sensors
- Implemented: MQTT-AD, don't add new devices when this is disabled in the system
- Implemented: MQTT-AD: Fan percentage_command_template merged with preset_modes
- Implemented: MQTT, added option to specify devices to be published to MQTT
- Implemented: P1 Meter report, now possible to remove data point (via shift click) from month chart
- Implemented: Persistent Timers (will work in all timer plans)
- Implemented: SetPoint devices can now be configured with a custom unit, min/max and step size and have a custom icon
- Implemented: Support for Python 3.12
- Implemented: TeleInfo, added Tempo field
- Implemented: Temp/Hum/Baro or combination can be replaced by any other Temp/Hum/Baro or combination
- Implemented: Temperature report, now possible to remove data point (via shift click) from variation chart
- Changed: Floorplan, better display of current state for counter devices
- Changed: Floorplan, Sound Icon state (0 dB = Off else On)
- Changed: MQTT-AD: better device name generation
- Changed: Netatmo login, now using the API Token
- Fixed: EventSystem, corrected event of RGB/W/WW devices
- Fixed: Export to csv from Charts
- Fixed: MQTT-AD, RGB dimmers did not work correctly in scenes/timers
- Fixed: MQTT-AD: better handling of Push-On/Push-Off devices
- Fixed: MQTT-AD: better handling of Switch commands that needs a 'state' object
- Fixed: MQTT-AD: fixed brightness for HS lights
- Fixed: MQTT-AD: prevent blind from updating on non-numeric state changes
- Fixed: P1 Meter, buffer size increased because of large datagrams on some meters
- Fixed: Python memory leak
- Fixed: Sunset/rise timers now correctly set the time for next day
- Fixed: Switches defined with "Off Delay" are not set to "Off" at startup
- Removed: OpenZWave (Move to ZWaveJS-UI in combination with MQTT Auto Discovery)
- Removed: RFXCom, firmware update via web interface (use RFXFlash instead)
For a full detailed overview visit: https://github.com/domoticz/domoticz/commits/master/
You can also update manually by going to your Domoticz folder and issue the following command: ./updaterelease
Up up and away
!
Il est recommandé aux utilisateurs de migrer vers Zwave-JS.