patrice a écrit :oui mais comme tu tapes domoticz stop ca ne marche pas
tu n'as le droit de faire start/stoop que dans /etc/init.d ou domoticz est lancé comme un service
Code : Tout sélectionner
pi@raspberrypi:~ $ cd domoticz
pi@raspberrypi:~/domoticz $ ./domoticz.sh
Usage: /etc/init.d/domoticz {start|stop|status|restart}
pi@raspberrypi:~/domoticz $
Ok, ça remarche ... en partie.patrice a écrit :ah pardon c'est moi qui perd le fil
la commande c'est
sudo ./domoticz
tout court
désolé je ne suis perdu en cours de route
Bonsoirdomcars0 a écrit :Salut,
Juste pour info, pourrais tu taper la commande
% sudo systemctl status -l domoticz
Et nous renvoyer la réponse STP.
Explication:
systemctl ( signifie "system control"), permet de vérifier l'état (status) , démarrer (start) ou arréter(stop) un service (domoticz dans notre cas) ,
l'option -l (pour 'long') nous permet d'obtenir plus d'info sur l'état.
Pour un domoticz qui tourne on obtient un truc du genre
domcars0@domopi:~ $ sudo systemctl status -l domoticz
● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/domoticz.sh)
Active: active (running) since jeu. 2017-02-16 07:17:44 CET; 1 weeks 2 days ago
CGroup: /system.slice/domoticz.service
└─601 /usr/local/domoticz/domoticz -daemon -www 8192 -sslwww 4238
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
domcars0 a écrit :Mouais pas beaucoup d'infos
Tu peux nous faire un copier/coller du fichier /etc/init.d/domoticz.sh s'il te plait.
Merci
Ah et aussi la réponse à la commande :
% ls -l /etc/init.d/domoticz.sh
(ls = list , -l = long response)
Code : Tout sélectionner
#! /bin/sh
### BEGIN INIT INFO
# Required-Stop: $network $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Home Automation System
# Description: This daemon will start the Domoticz Home Automation System
### END INIT INFO
# Do NOT "set -e"
PATH=/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin
/usr/local/bin/gpio export 17 out
/usr/local/bin/gpio export 18 out
/usr/local/bin/gpio export 27 out
/usr/local/bin/gpio export 22 out
/usr/local/bin/gpio export 23 out
/usr/local/bin/gpio export 24 out
/usr/local/bin/gpio export 25 out
/usr/local/bin/gpio export 12 out
DESC="Domoticz Home Automation System"
NAME=domoticz
USERNAME=pi
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
DAEMON=/home/pi/domoticz/$NAME
DAEMON_ARGS="-daemon"
#DAEMON_ARGS="$DAEMON_ARGS -daemonname $NAME -pidfile $PIDFILE"
DAEMON_ARGS="$DAEMON_ARGS -www 8080"
DAEMON_ARGS="$DAEMON_ARGS -sslwww 443"
#DAEMON_ARGS="$DAEMON_ARGS -log /tmp/domoticz.txt"
#DAEMON_ARGS="$DAEMON_ARGS -syslog"
# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0
# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh
# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions
pidof_domoticz() {
# if there is actually a domoticz process whose pid is in PIDFILE,
# print it and return 0.
if [ -e "$PIDFILE" ]; then
if pidof domoticz | tr ' ' '\n' | grep -w $(cat $PIDFILE); then
return 0
fi
fi
return 1
}
#
# Function that starts the daemon/service
#
do_start()
{
# Return
# 0 if daemon has been started
# 1 if daemon was already running
# 2 if daemon could not be started
start-stop-daemon --chuid $USERNAME --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
|| return 1
start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
$DAEMON_ARGS \
|| return 2
}
#
# Function that stops the daemon/service
#
do_stop()
{
# Return
# 0 if daemon has been stopped
# 1 if daemon was already stopped
# 2 if daemon could not be stopped
# other if a failure occurred
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
RETVAL="$?"
[ "$RETVAL" = 2 ] && return 2
# Wait for children to finish too if this is a daemon that forks
# and if the daemon is only ever run from this initscript.
# If the above conditions are not satisfied then add some other code
# that waits for the process to drop all resources that could be
# needed by services started subsequently. A last resort is to
# sleep for some time.
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
[ "$?" = 2 ] && return 2
# Many daemons don't delete their pidfiles when they exit.
rm -f $PIDFILE
return "$RETVAL"
}
case "$1" in
start)
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
do_start
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
stop)
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
do_stop
case "$?" in
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
esac
;;
status)
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
;;
reload)
log_daemon_msg "Reloading $DESC" "$NAME"
PID=$(pidof_domoticz) || true
if [ "${PID}" ]; then
kill -HUP $PID
fi
;;
restart)
log_daemon_msg "Restarting $DESC" "$NAME"
do_stop
case "$?" in
0|1)
do_start
case "$?" in
0) log_end_msg 0 ;;
1) log_end_msg 1 ;; # Old process is still running
*) log_end_msg 1 ;; # Failed to start
esac
;;
*)
# Failed to stop
log_end_msg 1
;;
esac
;;
*)
echo "Usage: $SCRIPTNAME {start|stop|status|restart}" >&2
exit 3
;;
esac
:Code : Tout sélectionner
pi@raspberrypi:/etc/init.d $ ls -l /etc/init.d/domoticz.sh
-rwxr-xr-x 1 root root 4533 févr. 24 19:41 /etc/init.d/domoticz.sh