je disais dans le dossier lua de domoticz
le script se nomme script_time_demo.lua
Code : Tout sélectionner
-- demo time script
-- script names have three name components: script_trigger_name.lua
-- trigger can be 'time' or 'device', name can be any string
-- domoticz will execute all time and device triggers when the relevant trigger occurs
--
-- copy this script and change the "name" part, all scripts named "demo" are ignored.
--
-- Make sure the encoding is UTF8 of the file
--
-- ingests tables: otherdevices,otherdevices_svalues
--
-- otherdevices and otherdevices_svalues are two item array for all devices:
-- otherdevices['yourotherdevicename']="On"
-- otherdevices_svalues['yourotherthermometer'] = string of svalues
--
-- Based on your logic, fill the commandArray with device commands. Device name is case sensitive.
--
-- Always, and I repeat ALWAYS start by checking for a state.
-- If you would only specify commandArray['AnotherDevice']='On', every time trigger (e.g. every minute) will switch AnotherDevice on.
--
-- The print command will output lua print statements to the domoticz log for debugging.
-- List all otherdevices states for debugging:
-- for i, v in pairs(otherdevices) do print(i, v) end
-- List all otherdevices svalues for debugging:
-- for i, v in pairs(otherdevices_svalues) do print(i, v) end
print('this will end up in the domoticz log')
t1 = os.time()
s = otherdevices_lastupdate['Garagedoor']
-- returns a date time like 2013-07-11 17:23:12
year = string.sub(s, 1, 4)
month = string.sub(s, 6, 7)
day = string.sub(s, 9, 10)
hour = string.sub(s, 12, 13)
minutes = string.sub(s, 15, 16)
seconds = string.sub(s, 18, 19)
commandArray = {}
t2 = os.time{year=year, month=month, day=day, hour=hour, min=minutes, sec=seconds}
difference = (os.difftime (t1, t2))
if (otherdevices['Garagedoor'] == 'Open' and difference > 600 and difference < 700) then
commandArray['SendNotification']='Garage door alert#The garage door has been open for more than 10 minutes!'
end
return commandArray
