Je n'arrives pas à trouver un tuto permettant d'implémenter de nouveaux capteur reçu à l'aide de l'interface RTL_433.
Je pense notamment aux compteurs d'eau froide que je reçois actuellement :
Code : Tout sélectionner
2021-01-10 11:54:54.986 Status: Rtl433: Unhandled sensor reading, please report: ({"time" : "2021-01-10 11:54:54", "model" : "Wireless-MBus", "mode" : "T", "M" : "SAP", "id" : 21229625, "version" : 152, "type" : 1, "type_string" : "Oil", "C" : 68, "data_length" : 26, "data" : "1744304cc58fc2209801a1430e001330063916a752335f95f27b1724", "mic" : "CRC", "CI" : 161, "AC" : 0, "ST" : 0, "CW" : 0, "mod" : "FSK", "freq1" : 868.900, "freq2" : 868.985, "rssi" : -0.138, "snr" : 34.225, "noise" : -34.363})
2021-01-10 11:54:55.087 Status: Rtl433: Unhandled sensor reading, please report: ({"time" : "2021-01-10 11:54:54", "model" : "Wireless-MBus", "mode" : "T", "M" : "SAP", "id" : 21229044, "version" : 152, "type" : 1, "type_string" : "Oil", "C" : 68, "data_length" : 26, "data" : "1744304c3e90c2209801a1530e00139fe7d32775a43012f7fc5c1355", "mic" : "CRC", "CI" : 161, "AC" : 0, "ST" : 0, "CW" : 0, "mod" : "FSK", "freq1" : 868.901, "freq2" : 868.990, "rssi" : -0.100, "snr" : 33.014, "noise" : -33.113})
2021-01-10 11:54:56.889 Status: Rtl433: Unhandled sensor reading, please report: ({"time" : "2021-01-10 11:54:56", "model" : "Wireless-MBus", "mode" : "T", "M" : "SAP", "id" : 21229434, "version" : 152, "type" : 1, "type_string" : "Oil", "C" : 68, "data_length" : 26, "data" : "1744304cd493c2209801a1430e00139f07075301a652ddeb5c8ea336", "mic" : "CRC", "CI" : 161, "AC" : 0, "ST" : 0, "CW" : 0, "mod" : "FSK", "freq1" : 868.886, "freq2" : 868.981, "rssi" : -0.110, "snr" : 35.045, "noise" : -35.154})
2021-01-10 11:54:59.191 Status: Rtl433: Unhandled sensor reading, please report: ({"center_frequency" : 433920000, "frequencies" : [433920000, 868950000], "hop_times" : [60]})
Je suis actuellement sous :
Rpi
2020.2 Beta
Bonne journée
Arnaud