Conbee2 (Zigbee for domoticz plugin (zigpy enabled)) + ZLinky_TIC (Lixee)

[georges54]

Quelques erreurs depuis la mise à jour (voir PJ)

[georges54]

Et pour finir pour aujourd'hui, les erreurs remontées par Domoticz depuis la mise à jour :

2023-07-18 16:41:30.242 Error: Getting error 'Transport endpoint is not connected' while getting remote_endpoint in connection::start
2023-07-18 17:13:42.207 Error: Conbee2_stable7: No transport, write directive to '192.168.2.2:61837' ignored.
2023-07-18 17:13:42.207 Error: Conbee2_stable7: No transport, write directive to '192.168.2.2:61836' ignored.
2023-07-18 21:12:37.590 Error: Conbee2_stable7: forwarder_thread - Error while receiving a Coordinator command
2023-07-18 21:12:37.613 Error: Conbee2_stable7: Issue in request 0180020060ff000104ff66010102531302000018010100020042102020202048502020424c4555002020200102002002110200290000ff03, dumping stack: Traceback (most recent call last):
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 41, in forwarder_thread
2023-07-18 21:12:37.613 forward_message(self, message)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/instrumentation.py", line 31, in f_out
2023-07-18 21:12:37.613 result = f_in(self, message)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 57, in forward_message
2023-07-18 21:12:37.613 self.F_out(message)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/plugin.py", line 852, in processFrame
2023-07-18 21:12:37.613 ZigateRead(self, Devices, Data)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 187, in ZigateRead
2023-07-18 21:12:37.613 _decoding(self, Devices, MsgData, MsgLQI)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2755, in Decode8100
2023-07-18 21:12:37.613 scan_attribute_reponse(self, Devices, MsgSQN, i_sqn, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgData, "8100")
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2931, in scan_attribute_reponse
2023-07-18 21:12:37.613 read_report_attributes(
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2987, in read_report_attributes
2023-07-18 21:12:37.613 ReadCluster(
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readClusters.py", line 189, in ReadCluster
2023-07-18 21:12:37.613 process_cluster_attribute_response( self, Devices, MsgSQN, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, MsgAttType, MsgAttSize, MsgClusterData, Source, )
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readZclClusters.py", line 66, in process_cluster_attribute_response
2023-07-18 21:12:37.613 func( self, Devices, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, value )
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 27, in zlinky_clusters
2023-07-18 21:12:37.613 zlinky_cluster_lixee_private(self, Devices, nwkid, ep, cluster, attribut, value)
2023-07-18 21:12:37.613 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 514, in zlinky_cluster_lixee_private
2023-07-18 21:12:37.613 if "BLEU" in value:
2023-07-18 21:12:37.613 TypeError: argument of type 'int' is not iterable
2023-07-18 21:12:37.613
2023-07-18 22:12:37.607 Error: Conbee2_stable7: forwarder_thread - Error while receiving a Coordinator command
2023-07-18 22:12:37.616 Error: Conbee2_stable7: Issue in request 0180020060ff000104ff66010102531302000018080100020042102020202048432020424c4555002020200102002001110200290000ff03, dumping stack: Traceback (most recent call last):
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 41, in forwarder_thread
2023-07-18 22:12:37.616 forward_message(self, message)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/instrumentation.py", line 31, in f_out
2023-07-18 22:12:37.616 result = f_in(self, message)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 57, in forward_message
2023-07-18 22:12:37.616 self.F_out(message)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/plugin.py", line 852, in processFrame
2023-07-18 22:12:37.616 ZigateRead(self, Devices, Data)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 187, in ZigateRead
2023-07-18 22:12:37.616 _decoding(self, Devices, MsgData, MsgLQI)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2755, in Decode8100
2023-07-18 22:12:37.616 scan_attribute_reponse(self, Devices, MsgSQN, i_sqn, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgData, "8100")
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2931, in scan_attribute_reponse
2023-07-18 22:12:37.616 read_report_attributes(
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2987, in read_report_attributes
2023-07-18 22:12:37.616 ReadCluster(
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readClusters.py", line 189, in ReadCluster
2023-07-18 22:12:37.616 process_cluster_attribute_response( self, Devices, MsgSQN, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, MsgAttType, MsgAttSize, MsgClusterData, Source, )
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readZclClusters.py", line 66, in process_cluster_attribute_response
2023-07-18 22:12:37.616 func( self, Devices, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, value )
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 27, in zlinky_clusters
2023-07-18 22:12:37.616 zlinky_cluster_lixee_private(self, Devices, nwkid, ep, cluster, attribut, value)
2023-07-18 22:12:37.616 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 514, in zlinky_cluster_lixee_private
2023-07-18 22:12:37.616 if "BLEU" in value:
2023-07-18 22:12:37.616 TypeError: argument of type 'int' is not iterable
2023-07-18 22:12:37.616
2023-07-18 23:16:42.527 Error: Getting error 'Transport endpoint is not connected' while getting remote_endpoint in connection::start
2023-07-18 23:18:13.267 Error: Conbee2_stable7: No transport, write directive to '192.168.2.2:55620' ignored.
2023-07-18 23:18:13.267 Error: Conbee2_stable7: No transport, write directive to '192.168.2.2:55622' ignored.

[georges54]

Après une nuit de fonctionnement, les erreurs remontées dans les logs de domoticz sont récurrentes. Voila le dernier train d'erreur remonté. Ces erreurs sont générées toutes les heures.

2023-07-19 08:12:37.696 Error: Conbee2_stable7: Issue in request 0180020060ff000104ff66010102531302000018510100020042102020202048502020424c4555002020200102002002110200290000ff03, dumping stack: Traceback (most recent call last):
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 41, in forwarder_thread
2023-07-19 08:12:37.696 forward_message(self, message)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/instrumentation.py", line 31, in f_out
2023-07-19 08:12:37.696 result = f_in(self, message)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Classes/ZigpyTransport/forwarderThread.py", line 57, in forward_message
2023-07-19 08:12:37.696 self.F_out(message)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/plugin.py", line 852, in processFrame
2023-07-19 08:12:37.696 ZigateRead(self, Devices, Data)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 187, in ZigateRead
2023-07-19 08:12:37.696 _decoding(self, Devices, MsgData, MsgLQI)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2755, in Decode8100
2023-07-19 08:12:37.696 scan_attribute_reponse(self, Devices, MsgSQN, i_sqn, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgData, "8100")
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2931, in scan_attribute_reponse
2023-07-19 08:12:37.696 read_report_attributes(
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/input.py", line 2987, in read_report_attributes
2023-07-19 08:12:37.696 ReadCluster(
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readClusters.py", line 189, in ReadCluster
2023-07-19 08:12:37.696 process_cluster_attribute_response( self, Devices, MsgSQN, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, MsgAttType, MsgAttSize, MsgClusterData, Source, )
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/Modules/readZclClusters.py", line 66, in process_cluster_attribute_response
2023-07-19 08:12:37.696 func( self, Devices, MsgSrcAddr, MsgSrcEp, MsgClusterId, MsgAttrID, value )
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 27, in zlinky_clusters
2023-07-19 08:12:37.696 zlinky_cluster_lixee_private(self, Devices, nwkid, ep, cluster, attribut, value)
2023-07-19 08:12:37.696 File "/home/pi/domoticz/plugins/Domoticz-Zigbee/DevicesModules/custom_zlinky.py", line 514, in zlinky_cluster_lixee_private
2023-07-19 08:12:37.696 if "BLEU" in value:
2023-07-19 08:12:37.696 TypeError: argument of type 'int' is not iterable
2023-07-19 08:12:37.696
2023-07-19 08:23:54.234 Error: Getting error 'Transport endpoint is not connected' while getting remote_endpoint in connection::start

[pipiche]

si tu peux récupérer la dernière version

[georges54]

Dernière version installée
Mise à jour ccedd314..3f9e04b5
Fast-forward
DevicesModules/custom_zlinky.py | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

Pour le moment, pas d'erreur mais pas de Couleur du Jour sur la widget _Alarm_ZL3

[georges54]

La couleur du jour remonte (voir PJ) ... mais en anglais.
Possibilité de la franciser ?

Et plus d'erreur au niveau des logs de domoticz.

[pipiche]

Peux-tu refaire un update git pull

donc on a la couleur du jour, maintenant il reste à trouver comment récupérer la couleur du lendemain.

est-ce que cela pourrait etre l'un des deux ?

Capture d’écran 2023-07-19 110835.png (13.08 Kio) Consulté 621 fois

[georges54]

Au cas ou, pour toi ou pour les personnes intéressées, EDF fournit les informations suivantes :

Couleurs TEMPO du jour et du lendemain (en mettant la date du jour) :
https://particulier.edf.fr/services/res ... 2023-07-19
Réponse : {"couleurJourJ":"TEMPO_BLEU","couleurJourJ1":"TEMPO_BLEU"}

Nombre de jours TEMPO restants par couleur (remise à zéro au 01/09) :
https://particulier.edf.fr/services/res ... erte=TEMPO
Réponse : {"PARAM_NB_J_BLANC":0,"PARAM_NB_J_ROUGE":0,"PARAM_NB_J_BLEU":42}

[georges54]

Et la couleur du jour est francisée :

[pipiche]

J’aurais pensé que l’info était aussi au niveau de la TiC du linky en mode standard, car elle est dispo en mode historique


Envoyé de mon iPhone en utilisant Tapatalk