Paramétrage sonde de température

Sous forum dédié au plugin MQTTMAPPER de FlyingDomotic
Merci de poster vous questions concernant ce plugin ici et non pas dans le forum MQTT directement
DiliaK
Messages : 257
Inscription : 02 sept. 2022, 19:38
Localisation : Chavanoz, France
Contact :

Re: Plugin MQTT de FlyingDomotic

Message par DiliaK »

Comment dire...

Un immense merci !
Ca fonctionne parfaitement. Le routeur externe fait bien son boulot, les données sont stables, je vais pouvoir expérimenter un peu plus et régler les timings.

MERCI !
Dernière modification par DiliaK le 11 nov. 2024, 02:35, modifié 1 fois.
Domoticz 2025.2 @ Debian 12 on AZW Green G2. Processeur : Intel Celeron N5095A Mémoire : 8 Go
HDD WD Red 500Go M.2 SATA
RFXCOM - RFXtrx433 USB 433.92MHz Transceiver Version: Pro XL1
RFXCOM - RFXtrx433 ethernet (inactif)
CONBEE II USB Zigbee4Domoticz
Flying Domotic
Messages : 772
Inscription : 10 mars 2020, 15:26

Re: Plugin MQTT de FlyingDomotic

Message par Flying Domotic »

Welcome!
DiliaK
Messages : 257
Inscription : 02 sept. 2022, 19:38
Localisation : Chavanoz, France
Contact :

Re: Plugin MQTT de FlyingDomotic

Message par DiliaK »

Pour info, je joue avec ça entre autres :
https://www.amazon.fr/dp/B0BYNN6ZSQ?ref ... asin_title
https://www.amazon.fr/dp/B0836J2J2C?ref ... asin_title

Le routeur modbus créant le flux MQTT :
https://www.amazon.fr/dp/B0BVVGQF3X?ref ... asin_title
Flux envoyé sur Mosquitto. Le plugin connecté Mosquitto reçoit les flux.


Bientôt, je vais tester ça :
https://fr.aliexpress.com/item/10050078 ... pt=glo2fra

Pour ceux qui sont intéressés.
Domoticz 2025.2 @ Debian 12 on AZW Green G2. Processeur : Intel Celeron N5095A Mémoire : 8 Go
HDD WD Red 500Go M.2 SATA
RFXCOM - RFXtrx433 USB 433.92MHz Transceiver Version: Pro XL1
RFXCOM - RFXtrx433 ethernet (inactif)
CONBEE II USB Zigbee4Domoticz
Répondre