post le log complet du démarrage et on verra bien s'il dit quelque chose.
Tu as essayé en mode navigation privé? ça permet de s'affranchir des problèmes de cache.
Problème récurrent de démarrage
Re: Problème récurrent de démarrage
PI3+, Buster, Domoticz V2020.2, rflink, zwave, chauffage piloté par qubino, sondes oregon et Vil1d, boite aux lettres détection passage facteur, volets roulants qubino fibaro.
Re: Problème récurrent de démarrage
Donc j'ai nettoyé tout le cache, j'ai éteint la pi puis j'ai redmarré, j'ai essayé de me connecter par le navigateur normal impossible puis en navigation privée impossible également.
le statut de domoticz ici,
Code : Tout sélectionner
GNU nano 3.2 /var/log/domoticz.log
2020-04-09 12:05:35.058 Status: Domoticz V2020.1 (build 11922) (c)2012-2020 GizMoCuz
2020-04-09 12:05:35.058 Status: Build Hash: 655b0cc4e, Date: 2020-04-07 16:34:31
2020-04-09 12:05:35.059 Status: Startup Path: /home/pi/domoticz/
2020-04-09 12:05:35.318 Sunrise: 06:50:00 SunSet: 20:12:00
2020-04-09 12:05:35.318 Day length: 13:23:00 Sun at south: 13:31:00
2020-04-09 12:05:35.318 Civil twilight start: 06:17:00 Civil twilight end: 20:45:00
2020-04-09 12:05:35.318 Nautical twilight start: 05:38:00 Nautical twilight end: 21:24:00
2020-04-09 12:05:35.318 Astronomical twilight start: 04:55:00 Astronomical twilight end: 22:07:00
2020-04-09 12:05:36.279 Status: PluginSystem: Started, Python version '3.7.3'.
2020-04-09 12:05:36.295 Active notification Subsystems: email (1/13)
2020-04-09 12:05:36.338 Status: WebServer(HTTP) started on address: :: with port 8080
2020-04-09 12:05:36.364 Status: WebServer(SSL) started on address: :: with port 443
2020-04-09 12:05:36.414 Starting shared server on: :::6144
2020-04-09 12:05:36.414 Status: TCPServer: shared server started...
2020-04-09 12:05:36.414 Status: RxQueue: queue worker started...
2020-04-09 12:05:38.415 Status: (Zigate) Started.
2020-04-09 12:05:38.416 Status: EventSystem: reset all events...
2020-04-09 12:05:38.417 Status: NotificationSystem: thread started...
2020-04-09 12:05:38.421 Status: EventSystem: reset all device statuses...
2020-04-09 12:05:38.617 Status: RFLink: Using serial port: /dev/ttyACM0
2020-04-09 12:05:38.651 Status: Python EventSystem: Initalizing event module.
2020-04-09 12:05:38.660 Status: EventSystem: Started
2020-04-09 12:05:38.660 Status: EventSystem: Queue thread started...
2020-04-09 12:05:38.880 Status: PluginSystem: Entering work loop.
2020-04-09 12:05:39.548 Status: RFLink: Controller Initialized!...
2020-04-09 12:05:39.623 Status: RFLink Detected, Version: 1.1 Revision: 48 Build: 4
2020-04-09 12:05:40.665 Status: (Zigate) Entering work loop.
2020-04-09 12:05:40.666 Status: (Zigate) Initialized version 4.7, author 'zaraki673 pipiche38'
2020-04-09 12:05:40.671 Status: (Zigate) Zigate plugin stable-4.7.008 started
2020-04-09 12:05:40.671 Status: (Zigate) Debug: 0
2020-04-09 12:05:40.671 Status: (Zigate) Python Version - 3.7.3 (default, Dec 20 2019, 18:57:59)
[GCC 8.3.0]
2020-04-09 12:05:40.671 Status: (Zigate) Switching Heartbeat to 5 s interval
2020-04-09 12:05:40.671 Status: (Zigate) DomoticzVersion: 2020.1 (build 11922)
2020-04-09 12:05:40.671 Status: (Zigate) DomoticzHash: 655b0cc4e
2020-04-09 12:05:40.672 Status: (Zigate) DomoticzBuildTime: 2020-04-07 16:34:31
2020-04-09 12:05:40.672 Status: (Zigate) load PluginConf
2020-04-09 12:05:40.686 Status: (Zigate) filename set to /home/pi/domoticz/plugins/Domoticz-zigate/Conf/PluginConf-06.json
2020-04-09 12:05:40.686 Status: (Zigate) pluginHome set to /home/pi/domoticz/plugins/Domoticz-zigate/
2020-04-09 12:05:40.686 Status: (Zigate) homedirectory set to /home/pi/domoticz/plugins/Domoticz-zigate/
2020-04-09 12:05:40.686 Status: (Zigate) pluginData set to /home/pi/domoticz/plugins/Domoticz-zigate/Data/
2020-04-09 12:05:40.686 Status: (Zigate) pluginConfig set to /home/pi/domoticz/plugins/Domoticz-zigate/Conf/
Code : Tout sélectionner
● domoticz.service - LSB: Home Automation System
Loaded: loaded (/etc/init.d/domoticz.sh; generated)
Active: active (running) since Thu 2020-04-09 14:58:32 CEST; 10min ago
Docs: man:systemd-sysv-generator(8)
Process: 392 ExecStart=/etc/init.d/domoticz.sh start (code=exited, status=0/SUCCESS)
Tasks: 20 (limit: 2200)
Memory: 34.0M
CGroup: /system.slice/domoticz.service
└─461 /home/pi/domoticz/domoticz -daemon -www 8080 -sslwww 443 -log /var/log/domoticz.log
avril 09 14:58:30 raspberrypi systemd[1]: Starting LSB: Home Automation System...
avril 09 14:58:31 raspberrypi domoticz.sh[392]: 2020-04-09 14:58:31.921 Status: Domoticz V2020.1 (build 11922) (c)2012-2020 GizMoCuz
avril 09 14:58:31 raspberrypi domoticz.sh[392]: 2020-04-09 14:58:31.927 Status: Build Hash: 655b0cc4e, Date: 2020-04-07 16:34:31
avril 09 14:58:31 raspberrypi domoticz.sh[392]: 2020-04-09 14:58:31.928 Status: Startup Path: /home/pi/domoticz/
avril 09 14:58:31 raspberrypi domoticz.sh[392]: domoticz: Domoticz is starting up....
avril 09 14:58:31 raspberrypi domoticz[440]: Domoticz is starting up....
avril 09 14:58:31 raspberrypi domoticz[461]: Domoticz running...
avril 09 14:58:32 raspberrypi systemd[1]: Started LSB: Home Automation System.
Re: Problème récurrent de démarrage
Je ne sais pas quoi te dire. d'après les logs tout va bien et domoticz tourne. Pour la zigate je ne sais pas je ne connais pas.
Essai avec un autre navigateur. tu utilise bien http://TonIpLocal:8080/#/Dashboard pour y accéder.
Essai avec un autre navigateur. tu utilise bien http://TonIpLocal:8080/#/Dashboard pour y accéder.
PI3+, Buster, Domoticz V2020.2, rflink, zwave, chauffage piloté par qubino, sondes oregon et Vil1d, boite aux lettres détection passage facteur, volets roulants qubino fibaro.
Re: Problème récurrent de démarrage
Problème résolu, en fait j'avais affecté ma pizigate à un mauvais port et du coup cela m'a tout bloqué. Heureusement Pipiche m'a tout arrangé et cela fonctionne à présent.
Merci beaucoup à vous de m'avoir aidé
Merci beaucoup à vous de m'avoir aidé
Re: Problème récurrent de démarrage
N'oublie pas de commenter la ligne que tu as ajouté pour économiser ta sd. Tu l'auras sous la main en cas de besoin.
PI3+, Buster, Domoticz V2020.2, rflink, zwave, chauffage piloté par qubino, sondes oregon et Vil1d, boite aux lettres détection passage facteur, volets roulants qubino fibaro.