[Résolu] Ma zigate ne répond plus

calouis · Message par **calouis** » 02 déc. 2020, 15:03

pour info mon sudo nano /etc/udev/rules.d/99-usb-serial.rules donne ceci :

SUBSYSTEM=="tty", ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", SYMLINK+="ttyUSB-Zigate"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", SYMLINK+="ttyUSB-RFXComXL"
SUBSYSTEM=="tty", ATTRS{idVendor}=="0658", ATTRS{idProduct}=="0200", SYMLINK+="ttyUSB-Zwave"

calouis · Message par **calouis** » 02 déc. 2020, 15:13

pipiche a écrit : 02 déc. 2020, 15:01
calouis a écrit : 02 déc. 2020, 14:53
Code : Tout sélectionner
pi@Pi3_Domo:~ $ ls -l /dev/ttyUSB-Zigate
lrwxrwxrwx 1 root root 7 déc  2 14:45 /dev/ttyUSB-Zigate -> ttyUSB1
En gros tu pointes sur ton control usb-RFXCOM qui est sur ttyUSB1 !!

Je te recommande dans Domoticz de changer le port et de mettre:

usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
a la place de ttyUSB1

Pas mieux

Code : Tout sélectionner

2020-12-02 15:12:18.694 Sunrise: 08:34:00 SunSet: 16:53:00
2020-12-02 15:12:18.694 Day length: 08:19:00 Sun at south: 12:43:00
2020-12-02 15:12:18.694 Civil twilight start: 07:56:00 Civil twilight end: 17:30:00
2020-12-02 15:12:18.694 Nautical twilight start: 07:15:00 Nautical twilight end: 18:12:00
2020-12-02 15:12:18.694 Astronomical twilight start: 06:36:00 Astronomical twilight end: 18:51:00
2020-12-02 15:12:18.779 Active notification Subsystems: pushover (1/13)
2020-12-02 15:12:18.804 Starting shared server on: :::6144
2020-12-02 15:12:18.659 Status: Domoticz V4.11214 (c)2012-2019 GizMoCuz
2020-12-02 15:12:18.659 Status: Build Hash: e7672936b, Date: 2019-08-19 10:51:32
2020-12-02 15:12:18.659 Status: Startup Path: /home/pi/domoticz/
2020-12-02 15:12:18.771 Status: PluginSystem: Started, Python version '3.5.3'.
2020-12-02 15:12:18.782 Status: WebServer(HTTP) started on address: :: with port 8282
2020-12-02 15:12:18.796 Status: WebServer(SSL) started on address: :: with port 443
2020-12-02 15:12:18.804 Status: TCPServer: shared server started...
2020-12-02 15:12:18.845 Status: RxQueue: queue worker started...
2020-12-02 15:12:20.815 Status: YeeLight Worker started...
2020-12-02 15:12:20.816 Status: XiaomiGateway (ID=7): Delaying worker startup...
2020-12-02 15:12:25.816 Status: XiaomiGateway (ID=7): Selected as main Gateway
2020-12-02 15:12:25.816 Status: XiaomiGateway (ID=7): Worker started...
2020-12-02 15:12:25.817 Status: Netatmo: Worker started...
2020-12-02 15:12:25.817 Status: (ZG) Started.
2020-12-02 15:12:25.817 Status: (PiMoniteur) Started.
2020-12-02 15:12:25.817 Status: XiaomiGateway (ID=7): Using 192.168.1.12 for local IP address.
2020-12-02 15:12:25.818 Status: Pinger: Worker started...
2020-12-02 15:12:25.819 Status: EventSystem: reset all events...
2020-12-02 15:12:25.834 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Solardata.lua
2020-12-02 15:12:25.836 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/global_data.lua
2020-12-02 15:12:25.836 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Yeelight Scene Selector.lua
2020-12-02 15:12:25.837 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Rideau_Garage_Axroll.lua
2020-12-02 15:12:25.837 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Check_dead_devices.lua
2020-12-02 15:12:25.837 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_Cadre_Etage.lua
2020-12-02 15:12:25.837 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_Cadre_Salon_Nuit.lua
2020-12-02 15:12:25.838 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Bouton_Carre_Switch.lua
2020-12-02 15:12:25.838 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_Cadre_SdB.lua
2020-12-02 15:12:25.838 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/CO2_ruban.lua
2020-12-02 15:12:25.838 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Bouton_Rond_miBox.lua
2020-12-02 15:12:25.838 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_Evier.lua
2020-12-02 15:12:25.839 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_mi_box.lua
2020-12-02 15:12:25.839 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Dummy_Soir_salon.lua
2020-12-02 15:12:25.839 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Dummy_tv_cine.lua
2020-12-02 15:12:25.839 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Dummy_cuisine_eclairage.lua
2020-12-02 15:12:25.839 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Xiaomi_gw.lua
2020-12-02 15:12:25.840 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Dummy_Salon_Blanc.lua
2020-12-02 15:12:25.840 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/PIR_Salon.lua
2020-12-02 15:12:25.840 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Beaufort.lua
2020-12-02 15:12:25.840 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/xiaomiMP3.lua
2020-12-02 15:12:25.841 Status: dzVents: Write file: /home/pi/domoticz/scripts/dzVents/generated_scripts/Fin2Cycle.lua
2020-12-02 15:12:25.841 Status: EventSystem: reset all device statuses...
2020-12-02 15:12:25.903 Status: XiaomiGateway: RGB Gateway Detected
2020-12-02 15:12:26.859 (ZG) Device: 42 - ID: 1411, Name: 'ZG - PIR TV', nValue: 0, sValue: 'Off'
2020-12-02 15:12:26.859 (ZG) Device ID: '1411'
2020-12-02 15:12:26.859 (ZG) Device Name: 'ZG - PIR TV'
2020-12-02 15:12:26.859 (ZG) Device nValue: 0
2020-12-02 15:12:26.859 (ZG) Device sValue: 'Off'
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {}
2020-12-02 15:12:26.860 (ZG) Device: 43 - ID: 1900, Name: 'ZG - Rideau G', nValue: 0, sValue: 'Closed'
2020-12-02 15:12:26.860 (ZG) Device ID: '1900'
2020-12-02 15:12:26.860 (ZG) Device Name: 'ZG - Rideau G'
2020-12-02 15:12:26.860 (ZG) Device nValue: 0
2020-12-02 15:12:26.860 (ZG) Device sValue: 'Closed'
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {}
2020-12-02 15:12:26.860 (ZG) Device: 44 - ID: 2162, Name: 'ZG - lumi.plug.mmeu01_Voltage', nValue: 0, sValue: ''
2020-12-02 15:12:26.860 (ZG) Device ID: '2162'
2020-12-02 15:12:26.860 (ZG) Device Name: 'ZG - lumi.plug.mmeu01_Voltage'
2020-12-02 15:12:26.860 (ZG) Device nValue: 0
2020-12-02 15:12:26.860 (ZG) Device sValue: ''
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {}
2020-12-02 15:12:26.860 (ZG) Device: 45 - ID: 2163, Name: 'ZG - Nespresso_Conso', nValue: 0, sValue: '0.0'
2020-12-02 15:12:26.860 (ZG) Device ID: '2163'
2020-12-02 15:12:26.860 (ZG) Device Name: 'ZG - Nespresso_Conso'
2020-12-02 15:12:26.860 (ZG) Device nValue: 0
2020-12-02 15:12:26.860 (ZG) Device sValue: '0.0'
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {}
2020-12-02 15:12:26.860 (ZG) Device: 46 - ID: 2164, Name: 'ZG - Nespresso_Cumul', nValue: 0, sValue: '0.0;256.5'
2020-12-02 15:12:26.860 (ZG) Device ID: '2164'
2020-12-02 15:12:26.860 (ZG) Device Name: 'ZG - Nespresso_Cumul'
2020-12-02 15:12:26.860 (ZG) Device nValue: 0
2020-12-02 15:12:26.860 (ZG) Device sValue: '0.0;256.5'
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {'EnergyMeterMode': '1'}
2020-12-02 15:12:26.860 (ZG) Device: 47 - ID: 2165, Name: 'ZG - Nespresso', nValue: 0, sValue: 'Off'
2020-12-02 15:12:26.860 (ZG) Device ID: '2165'
2020-12-02 15:12:26.860 (ZG) Device Name: 'ZG - Nespresso'
2020-12-02 15:12:26.860 (ZG) Device nValue: 0
2020-12-02 15:12:26.860 (ZG) Device sValue: 'Off'
2020-12-02 15:12:26.860 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.860 (ZG) Device Options: {}
2020-12-02 15:12:26.860 (ZG) Device: 48 - ID: 2168, Name: 'ZG - lumi.plug.mmeu01_Voltage-04cf8cdf3c7b094b-15', nValue: 0, sValue: ''
2020-12-02 15:12:26.860 (ZG) Device ID: '2168'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - lumi.plug.mmeu01_Voltage-04cf8cdf3c7b094b-15'
2020-12-02 15:12:26.861 (ZG) Device nValue: 0
2020-12-02 15:12:26.861 (ZG) Device sValue: ''
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.861 (ZG) Device Options: {}
2020-12-02 15:12:26.861 (ZG) Device: 49 - ID: 2169, Name: 'ZG - KIA Conso', nValue: 4, sValue: '4.514'
2020-12-02 15:12:26.861 (ZG) Device ID: '2169'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - KIA Conso'
2020-12-02 15:12:26.861 (ZG) Device nValue: 4
2020-12-02 15:12:26.861 (ZG) Device sValue: '4.514'
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.861 (ZG) Device Options: {}
2020-12-02 15:12:26.861 (ZG) Device: 50 - ID: 2170, Name: 'ZG - KIA Cumul', nValue: 0, sValue: '4.51;851.4'
2020-12-02 15:12:26.861 (ZG) Device ID: '2170'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - KIA Cumul'
2020-12-02 15:12:26.861 (ZG) Device nValue: 0
2020-12-02 15:12:26.861 (ZG) Device sValue: '4.51;851.4'
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.861 (ZG) Device Options: {'EnergyMeterMode': '1'}
2020-12-02 15:12:26.861 (ZG) Device: 51 - ID: 2171, Name: 'ZG - 220FR - 2 KIA', nValue: 1, sValue: 'On'
2020-12-02 15:12:26.861 (ZG) Device ID: '2171'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - 220FR - 2 KIA'
2020-12-02 15:12:26.861 (ZG) Device nValue: 1
2020-12-02 15:12:26.861 (ZG) Device sValue: 'On'
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.861 (ZG) Device Options: {}
2020-12-02 15:12:26.861 (ZG) Device: 52 - ID: 2730, Name: 'ZG - Portail', nValue: 0, sValue: 'Closed'
2020-12-02 15:12:26.861 (ZG) Device ID: '2730'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - Portail'
2020-12-02 15:12:26.861 (ZG) Device nValue: 0
2020-12-02 15:12:26.861 (ZG) Device sValue: 'Closed'
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.861 (ZG) Device Options: {}
2020-12-02 15:12:26.861 (ZG) Device: 53 - ID: 2781, Name: 'ZG - Volet Baie', nValue: 0, sValue: '0'
2020-12-02 15:12:26.861 (ZG) Device ID: '2781'
2020-12-02 15:12:26.861 (ZG) Device Name: 'ZG - Volet Baie'
2020-12-02 15:12:26.861 (ZG) Device nValue: 0
2020-12-02 15:12:26.861 (ZG) Device sValue: '0'
2020-12-02 15:12:26.861 (ZG) Device LastLevel: 100
2020-12-02 15:12:26.861 (ZG) Device Options: {}
2020-12-02 15:12:26.862 (ZG) Device: 54 - ID: 2783, Name: 'ZG - Contact Volet', nValue: 0, sValue: 'Closed'
2020-12-02 15:12:26.862 (ZG) Device ID: '2783'
2020-12-02 15:12:26.862 (ZG) Device Name: 'ZG - Contact Volet'
2020-12-02 15:12:26.862 (ZG) Device nValue: 0
2020-12-02 15:12:26.862 (ZG) Device sValue: 'Closed'
2020-12-02 15:12:26.862 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.862 (ZG) Device Options: {}
2020-12-02 15:12:26.862 (ZG) Device: 55 - ID: 2784, Name: 'ZG - Contact Baie', nValue: 0, sValue: 'Closed'
2020-12-02 15:12:26.862 (ZG) Device ID: '2784'
2020-12-02 15:12:26.862 (ZG) Device Name: 'ZG - Contact Baie'
2020-12-02 15:12:26.862 (ZG) Device nValue: 0
2020-12-02 15:12:26.862 (ZG) Device sValue: 'Closed'
2020-12-02 15:12:26.862 (ZG) Device LastLevel: 0
2020-12-02 15:12:26.862 (ZG) Device Options: {}
2020-12-02 15:12:26.862 (ZG) DomoticzVersion: 4.11214
2020-12-02 15:12:26.216 Status: PluginSystem: Entering work loop.
2020-12-02 15:12:26.260 Status: Python EventSystem: Initalizing event module.
2020-12-02 15:12:26.260 Status: EventSystem: Started
2020-12-02 15:12:26.260 Status: EventSystem: Queue thread started...
2020-12-02 15:12:26.718 Status: (ZG) Entering work loop.
2020-12-02 15:12:26.719 Status: (ZG) Initialized version 4.11, author 'zaraki673 pipiche38'
2020-12-02 15:12:26.837 Status: (PiMoniteur) Entering work loop.
2020-12-02 15:12:26.838 Status: (PiMoniteur) Initialized version 3.1, author 'Xorfor'
2020-12-02 15:12:26.851 Status: (ZG) Zigate plugin stable-4.11.011 started
2020-12-02 15:12:26.851 Status: (ZG) Debug: 2
2020-12-02 15:12:26.862 Status: (ZG) load PluginConf
2020-12-02 15:12:26.864 Status: (ZG) pluginConfig set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/
2020-12-02 15:12:26.864 Status: (ZG) pluginData set to /home/pi/domoticz/plugins/Domoticz-Zigate/Data/
2020-12-02 15:12:26.864 Status: (ZG) pluginOTAFirmware set to /home/pi/domoticz/plugins/Domoticz-Zigate/OTAFirmware/
2020-12-02 15:12:26.864 Status: (ZG) pluginLogs set to /home/pi/domoticz/plugins/Domoticz-Zigate/Logs/
2020-12-02 15:12:26.864 Status: (ZG) homedirectory set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-02 15:12:26.864 Status: (ZG) pluginHome set to /home/pi/domoticz/plugins/Domoticz-Zigate/
2020-12-02 15:12:26.864 Status: (ZG) pluginWWW set to /home/pi/domoticz/plugins/Domoticz-Zigate/www/
2020-12-02 15:12:26.864 Status: (ZG) filename set to /home/pi/domoticz/plugins/Domoticz-Zigate/Conf/PluginConf-17.json
2020-12-02 15:12:26.864 Status: (ZG) pluginReports set to /home/pi/domoticz/plugins/Domoticz-Zigate/Reports/
2020-12-02 15:12:26.864 Status: (ZG) channel set to 11
2020-12-02 15:12:26.864 Status: (ZG) port set to 8282
2020-12-02 15:12:26.864 Status: (ZG) Switching Heartbeat to 5 s interval
2020-12-02 15:12:26.864 Status: (ZG) Python Version - 3.5.3 (default, Sep 27 2018, 17:25:39)
2020-12-02 15:12:26.864 [GCC 6.3.0 20170516]
2020-12-02 15:12:26.864 Status: (ZG) DomoticzVersion: 4.11214
2020-12-02 15:12:26.864 Status: (ZG) DomoticzHash: e7672936b
2020-12-02 15:12:26.865 Status: (ZG) DomoticzBuildTime: 2019-08-19 10:51:32
2020-12-02 15:12:26.865 Status: (ZG) Opening DomoticzDB in raw
2020-12-02 15:12:26.926 Status: (ZG) Plugin Database: DeviceList-17.txt
2020-12-02 15:12:26.934 Status: (ZG) DeviceConf loaded
2020-12-02 15:12:27.488 (PiMoniteur) Debug logging mask set to: NONE
2020-12-02 15:12:27.017 Status: (ZG) load ListOfDevice
2020-12-02 15:12:27.433 Status: (ZG) Entries loaded from /home/pi/domoticz/plugins/Domoticz-Zigate/Data/DeviceList-17.txt
2020-12-02 15:12:27.478 Status: (ZG) Transport mode: USB
2020-12-02 15:12:27.478 Status: (ZG) ==> Transport Mode: auto
2020-12-02 15:12:27.482 Status: (ZG) Connection Name: Zigate, Transport: Serial, Address: /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
2020-12-02 15:12:27.482 Status: (ZG) Connection open: Name: 'ZiGate', Transport: 'Serial', Protocol: 'None', Address: '/dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0', Port: '', Baud: 115200, Connected: False, Parent: 'None'
2020-12-02 15:12:31.857 (Opale) Temp + Humidity (Netatmo ext.)
2020-12-02 15:12:31.869 (Opale) Temp + Humidity + Baro (Netatmo int.)
2020-12-02 15:12:31.873 (Opale) Air Quality (CO2)
2020-12-02 15:12:31.876 (Opale) General/Sound Level (Sonomètre)
2020-12-02 15:12:32.166 Status: dzVents: Info: Handling events for: "CO2", value: "459"
2020-12-02 15:12:32.166 Status: dzVents: Info: ------ Start internal script: CO2_ruban: Device: "CO2 (Opale)", Index: 62
2020-12-02 15:12:32.171 Status: dzVents: Info: ------ Finished CO2_ruban

calouis · Message par **calouis** » 02 déc. 2020, 15:22

si ça peut aider :

Code : Tout sélectionner

pi@Pi3_Domo:~ $ sudo udevadm info --query=all --name=ttyUSB0
P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/ttyUSB0/tty/ttyUSB0
N: ttyUSB0
S: serial/by-id/usb-RFXCOM_RFXtrx433XL_DO2ZYL2E-if00-port0
S: serial/by-path/platform-3f980000.usb-usb-0:1.1.3.3:1.0-port0
S: ttyUSB-RFXComXL
E: DEVLINKS=/dev/ttyUSB-RFXComXL /dev/serial/by-path/platform-3f980000.usb-usb-0:1.1.3.3:1.0-port0 /dev/serial/by-id/usb-RFXCOM_RFXtrx433XL_DO2ZYL2E-if00-port0
E: DEVNAME=/dev/ttyUSB0
E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.1/1-1.1.3/1-1.1.3.3/1-1.1.3.3:1.0/ttyUSB0/tty/ttyUSB0
E: ID_BUS=usb
E: ID_MODEL=RFXtrx433XL
E: ID_MODEL_ENC=RFXtrx433XL
E: ID_MODEL_FROM_DATABASE=Bridge(I2C/SPI/UART/FIFO)
E: ID_MODEL_ID=6015
E: ID_PATH=platform-3f980000.usb-usb-0:1.1.3.3:1.0
E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_1_3_3_1_0
E: ID_REVISION=1000
E: ID_SERIAL=RFXCOM_RFXtrx433XL_DO2ZYL2E
E: ID_SERIAL_SHORT=DO2ZYL2E
E: ID_TYPE=generic
E: ID_USB_DRIVER=ftdi_sio
E: ID_USB_INTERFACES=:ffffff:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=RFXCOM
E: ID_VENDOR_ENC=RFXCOM
E: ID_VENDOR_FROM_DATABASE=Future Technology Devices International, Ltd
E: ID_VENDOR_ID=0403
E: MAJOR=188
E: MINOR=0
E: SUBSYSTEM=tty
E: TAGS=:systemd:
E: USEC_INITIALIZED=6945416

pi@Pi3_Domo:~ $ sudo udevadm info --query=all --name=ttyUSB1
P: /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB1/tty/ttyUSB1
N: ttyUSB1
S: serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
S: serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
S: ttyUSB-Zigate
E: DEVLINKS=/dev/ttyUSB-Zigate /dev/serial/by-id/usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0 /dev/serial/by-path/platform-3f980000.usb-usb-0:1.3:1.0-port0
E: DEVNAME=/dev/ttyUSB1
E: DEVPATH=/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3:1.0/ttyUSB1/tty/ttyUSB1
E: ID_BUS=usb
E: ID_MODEL=USB-Serial_Controller
E: ID_MODEL_ENC=USB-Serial\x20Controller
E: ID_MODEL_FROM_DATABASE=PL2303 Serial Port
E: ID_MODEL_ID=2303
E: ID_PATH=platform-3f980000.usb-usb-0:1.3:1.0
E: ID_PATH_TAG=platform-3f980000_usb-usb-0_1_3_1_0
E: ID_REVISION=0300
E: ID_SERIAL=Prolific_Technology_Inc._USB-Serial_Controller
E: ID_TYPE=generic
E: ID_USB_DRIVER=pl2303
E: ID_USB_INTERFACES=:ff0000:
E: ID_USB_INTERFACE_NUM=00
E: ID_VENDOR=Prolific_Technology_Inc.
E: ID_VENDOR_ENC=Prolific\x20Technology\x20Inc.
E: ID_VENDOR_FROM_DATABASE=Prolific Technology, Inc.
E: ID_VENDOR_ID=067b
E: MAJOR=188
E: MINOR=1
E: SUBSYSTEM=tty
E: TAGS=:systemd:
E: USEC_INITIALIZED=6930632

calouis · Message par **calouis** » 02 déc. 2020, 16:25

pipiche a écrit : 02 déc. 2020, 15:01
calouis a écrit : 02 déc. 2020, 14:53
Code : Tout sélectionner
pi@Pi3_Domo:~ $ ls -l /dev/ttyUSB-Zigate
lrwxrwxrwx 1 root root 7 déc  2 14:45 /dev/ttyUSB-Zigate -> ttyUSB1
En gros tu pointes sur ton control usb-RFXCOM qui est sur ttyUSB1 !!

Je te recommande dans Domoticz de changer le port et de mettre:

usb-Prolific_Technology_Inc._USB-Serial_Controller-if00-port0
a la place de ttyUSB1

d'apres Rules, mes liens sont bons ! donc rfxcom en ttyUSB0 et zigate en ttyUSB1.

au secours !

calouis · Message par **calouis** » 02 déc. 2020, 16:26

ce ne serait pas Strecht ou ma version de DZ qui pose pb?

pipiche · Message par **pipiche** » 02 déc. 2020, 16:52

Est-ce que si tu mets la clef sur un PC Windows et que tu la testes avec l'outil ZGUI elle fonctionne ?

Voir https://zigate.fr/documentation/tester-la-zigate-usb/

calouis · Message par **calouis** » 02 déc. 2020, 17:04

Je testerai WE prochain, j'avoue qu'après maj réussi du firmware, j'ai rebranché zigate sur monRpi et n'ai pas vérifié son fonctionnement avec l'outil Windows...

pipiche · Message par **pipiche** » 02 déc. 2020, 18:45

calouis a écrit : 02 déc. 2020, 17:04 Je testerai WE prochain, j'avoue qu'après maj réussi du firmware, j'ai rebranché zigate sur monRpi et n'ai pas vérifié son fonctionnement avec l'outil Windows...

Après tu peux refaire un flash . Autre possibilité le module USB-TTL est en panne

calouis · Message par **calouis** » 05 déc. 2020, 10:43

Bonjour Pipiche
Je viens de reflasher la zigate.
Mais quand je teste son fonctionnement avec ZGWUI sur GetVersion une ligne de réponse au lieu de trois..

Dois-je en conclure que la zigate est HS ?

pipiche · Message par **pipiche** » 05 déc. 2020, 10:57

Tu peux essayer de reflasher en faisant un erase EEPROM.

Après quoi si pas ok tu peux contacter le vendeur de la zigate peut-être aura-t-il d’autres pistes

Envoyé de mon iPhone en utilisant Tapatalk

Forum Domoticz en français

[Résolu] Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus

Re: Ma zigate ne répond plus